Products in Plastics: Heat Stabilizer

ELASTOSIL® AUX Stabilizer H0 is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

AEROXIDE® Alu C is a fine-particulate, pure aluminum oxide (Al₂O₃) with high specific surface area and marked aggregate and agglomerate structure. Because of it high purity and low water content, the product can be used well as an additive to anorganic materials, for heat insulation, and also as a catalyst substrate. The positive surface charge can be used to control the electrostatic charge.

AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g.

AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g.

ELASTOSIL® AUX Stabilizer H3 is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

ELASTOSIL® AUX Stabilizer H4 is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

GENIOSIL® Stabilizer T is a liquid system specifically formulated for transparent waterproofing liquid membranes utilizing GENIOSIL® silane-modified polymers. Additionally, it is suitable for stabilizing standard transparent sealant and adhesive formulations based on GENIOSIL® silane-modified polymers. The product contains a synergistic blend of 33% UV absorber and 33% HALS, combined within vinyltrimethoxy silane GENIOSIL® XL 10.

GENIOSIL® Stabilizer F is a liquid system specifically developed for filled waterproofing liquid membranes that utilize GENIOSIL® silane-modified polymers. This product is also suitable for stabilizing standard filled sealant and adhesive formulations based on GENIOSIL® silane-modified polymers. It contains a synergistic blend of 20% UV absorber and 40% HALS, combined within vinyltrimethoxy silane GENIOSIL® XL 10.

ELASTOSIL® AUX Stabilizer H6 F is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

ELASTOSIL® AUX Stabilizer H6 is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

ELASTOSIL® AUX Stabilizer H1 is a ready-to-use additive comprising a heat-stabilizing filler and a reactive silicone polymer, which is a typical ingredient of ELASTOSIL® high-consistency rubber grades. This ensures that the batch is incorporated into the elastomer network during vulcanization and thus does not show any migration.

Blachford Calcium Stearate L-155V is a metallic stearate powder formed from a fusion reaction (calcium hydroxide + fatty acid), suitable for use in animal feed applications and are SFSF and FSMA compliant (pending 2021). The L-155V grade is manufactured using a vegetable derived stearic acid.

Blachford Calcium Stearate L-155 is a metallic stearate powder formed from a fusion reaction (calcium hydroxide + fatty acid), suitable for use in animal feed applications and are SFSF and FSMA compliant (pending 2021). The L-155 grade is manufactured using tallow derived stearic acid.

Blachford Calcium Stearate 325 is a metallic stearate powder formed from a fusion reaction (calcium hydroxide + fatty acid), suitable for use in animal feed applications and are SFSF and FSMA compliant (pending 2021). The 325 grade is manufactured using tallow-derived stearic acid and is ground to a finer particle size than L-155.

Blachford Calcium Stearate Coarse is a metallic stearate powder formed from a fusion reaction (calcium hydroxide + fatty acid), suitable for use in animal feed applications and are SFSF and FSMA compliant (pending 2021). The Coarse grade is manufactured using tallow-derived stearic acid and is finished differently in order to produce a more granular, lower-dusting product.

CONSTAB CON-X® ST 340 PE is a product with multiple functions: antioxidant, heat stabilizer, and stabilizer. The labelling claims include being sustainable and recyclable. The carrier for this product is polyethylene (PE) and resin-based. The materials feature characteristics such as clarity, excellent seal properties, flexibility, freeze resistance, high efficiency, recyclability, and tear resistance.

SperseStab™ 1425 is a high-molecular-weight phenolic antioxidant containing a phosphonate located para to the phenol. This orientation provides excellent color and low gas fading in a UV-stabilized antioxidant. The calcium salt acts as a soluble catalyst, especially for the esterification of rosin esters. Additionally, SperseStab™ 1425 works as a catalyst in the solid-state polymerization of PET polymers. Other applications include polyolefins, fibers, adhesives, and lubricating oils and greases.

SperseStab™ 4866 is ideally suited for both PVC and TPU systems, with strong UV-B absorbance as well as radical trapping ability that does not impart color under UV stability testing. Additionally, SperseStab™ 4866 includes a synergistic UV stabilizer for additional long-term UV stability. It can be used in conjunction with other thermal stabilizers and antioxidants.

SperseStab™ TNPP is a liquid phosphite antioxidant and thermal stabilizer for use in elastomers, including SBR, NBR, and SIS. It is highly effective in light-colored solutions and emulsion-polymerized elastomers. It is extremely efficient at preventing gel formation during polymerization, processing, and long-term heat aging. Additionally, this cost-effective process stabilizer finds application in thermoplastic polymers such as polyethylene, polypropylene, polystyrene, and ABS.

MOCOM Compounds ALPERFORM® PA IM NC2595-14 is a high-impact, modified and heat-stabilized polyamide 66 base polymer, suitable for application in cable ties. For optimal performance, it should be pre-dried in a dry air (dessiccant) dryer at temperatures below 80°C for 2-12 hours, depending on the moisture content, with a maximum moisture content of 0.15%. The injection molding temperature should be between 270-290°C, and the mold temperature should be between 40-80°C.

OMNISTAB® LS 944 is a high molecular weight oligomeric hindered amine light stabilizer (HALS) and heat stabilizer.

BRUGGOLEN® H3336 is a mixture of copper complex-based antioxidants and synergists in powder form. BRUGGOLEN® H3336 provides highly efficient heat stabilization of polyamides up to 180°C, which leads to effective processing stabilization against polymer degradation. It gives a characteristic bluish discoloration after conditioning. Features:Cost-effectiveExcellent dispersionHigh extraction resistance, no plate-outSuited for E&E applicationsCharacteristic:Bluish discoloration after conditioning

BRUGGOLEN® H164 is a synergistic mixture of sterically hindered phenolic antioxidants and phosphonates in powder form. Our phenol-based stabilizer BRUGGOLEN® H164 is reaching a long-term protection of polyamides against heat aging for technical applications such as:Non-discoloringExcellent in glass fiber reinforced or mineral-filled polyamides

BRUGGOLEN® TP-H2062 is a halogen and metal-free heat stabilizer for polyamides in the form of polymeric granules. In E&E applications, it provides:Improved retention of mechanical performance under heat compared to standard phosphite/phenolic-based stabilizersTensile strength retention >50% for 2500h at 150°CMaintains comparative tracking index (CTI) up to 600VAllows E&E applications at elevated temperaturesHalogen and metal-free heat stabilizer in granular product form

BRUGGOLEN® TP-H1805 - High Heat Stabil­izer for Aliphatic Poly­amides above 200°C. It is a granular form heat stabilizer package with synergists. Powerful long-term protection of aliphatic polyamides at very high temperatures: PA6 up to 200°C, PA6.6 up to 230°C: tensile strength retention >50% for 3000 h at 200°C no activation required easy processing during compounding upgrades aliphatic polyamides to the performance range of high temperature nylons

BRUGGOLEN® H320 is a synergistic mixture of copper compounds, halides, and lubricants in powder form. This copper, salt-based antioxidant is in the form of powder and it provides excellent long-term protection of polyamides against embrittlement, powerful protection against premature fatigue and high temperatures up to 180°C.Features: Powerful long-term protection Excellent quality and homogeneity via specific production know-howCharacteristic:Bluish or greenish discoloration after conditioning

PUREstab B215 - a processing and long-term thermal stabilizer system - is a synergistic blend of PUREfos 168, an organo-phosphite of low volatility and particularly resistant to hydrolysis which protects during the polymer processing and PUREstab 1010 a hindered phenolic antioxidant that contributes synergistically to the processing stabilization and provides long-term thermal stability during service life.

PUREstab B225 - a processing and long-term thermal stabilizer system - is a synergistic blend of PUREfos 168, an organo-phosphite of low volatility and particularly resistant to hydrolysis which protects during the polymer processing and PUREstab 1010 a hindered phenolic antioxidant that contributes synergistically to the processing stabilization and provides long-term thermal stability during service life.

Andisil® TL 10 products are high activity liquid catalysts used in the condensation cure of silicones, and the synthesis of polyurethanes & esters.

BRUGGOLEN® TP-R2090 is our recycling additive for polyolefins Bruggolen® R recycling additives improve the polyolefin recycling processes and help recyclers to produce higher value polyolefine recyclates for long term applications. For the first time the new repairing technology allows to repair damages from prior use. BRUGGOLEN® TP-R2090 for Upcycling of post-industrial and post-consumer polypropylene waste streams: Repair of damage in the polymer chains by novel chemical system. High quality recyclates for demanding long term applications Prolonged retention of mechanical properties during long term heat aging. One-Pack solution stabilizes the recycling process

RIANOX® 445FF is the combination of high amine antioxidant activity and good color make it an ideal antioxidant and heat stabilizer for rubbers and plastics.

RIANOX® 1035 is a sulfur containing primary (phenolic) antioxidant and heat stabilizer used for the process stabilization of polyethylene wire and cable resins.

Andisil® TL 28 products are high activity liquid catalysts used in the condensation cure of silicones, and the synthesis of polyurethanes & esters.

BRUGGOLEN® TP-H1804 is a copper-based heat stabilizer package with synergists for use in aliphatic polyamides. This product is available in granular form. It is a very effective protection agent and antioxidant against premature fatigue of the mechanical properties and embrittlement of the finished parts under long-term stress, both in unreinforced and glass-fiber reinforced or mineral-filled aliphatic polyamides up to 190°C.

PUREstab B220 - a processing and long-term thermal stabilizer system - is a synergistic blend of PUREfos 168, an organo-phosphite of low volatility and particularly resistant to hydrolysis which protects during the polymer processing and PUREstab 1010 a hindered phenolic antioxidant that contributes synergistically to the processing stabilization and provides long-term thermal stability during service life.

BRUGGOLEN® H321 is a blend of copper compounds, halides, and lubricants in the form of compacted granules. It neutralizes the harmful effects of high temperatures on polyamides. It is a classic copper, salt-based heat stabilizer that works to a temperature of 180°C by reacting with the degradation products that are formed during thermal processing or exposure to high temperatures, neutralizing their harmful effects and helping to preserve the integrity of the polymer.