Knowde Enhanced TDS
Identification & Functionality
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
Applications & Uses
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Physical Form
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Processing Information (Injection Molding)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Flexural Modulus | 2000.0 | MPa | ISO 178 |
Flexural Strength | 80.0 | MPa | ISO 178 |
Tensile Modulus | 2100.0 | MPa | ISO 527 |
Tensile Strength | 53.0 | MPa | ISO 527 |
Tensile Elongation at Break | 35.0 | % | ISO 527 |
Impact Strength (Charpy, at 23°C) | no break | kJ/m² | ISO 179/1eU |
Impact Strength (Charpy, at -40°C) | no break | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Charpy, at 23°C) | 65.0 | kJ/m² | ISO 179/1eA |
Notched Impact (Charpy, at -40°C) | 10.0 | kJ/m² | ISO 179/1eA |
Value | Units | Test Method / Conditions | |
Density | 1090.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
HDT / A (1.8 MPa) | 59.0 | °C | ISO 75-1/-2 |
DSC (Melt Point) | 260.0 | °C | ISO 11357 |
Value | Units | Test Method / Conditions | |
Moisture Content | max. 0.15 | % | — |
Value | Units | Test Method / Conditions | |
Melt Temperature | 270 - 290 | °C | — |
Mould Temperature | 40 - 80 | °C | — |
Value | Units | Test Method / Conditions | |
Shrinkage (Lengthwise, 24h) | 1 - 1.4 | % | ISO 294-4 |
Shrinkage (Lateral, 24h) | 1.3 - 1.7 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In a dry air (dessiccant) dryer <80 °C for 2-12 h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light not above 30°C.