Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Parts, Shapes & Films
Products in Parts, Shapes & Films
1,838 Products found in Parts, Shapes & Films
Filters
Suppliers
Applications
Physical Form
Polymer Name
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Mitsubishi Chemical Group Corporation
Fluorosint® 500 PTFE
Polymer Name:
Polytetrafluoroethylene (PTFE)
Physical Form:
Plates, Rods
Features:
Good Tribological Properties, Good Mechanical Properties, Good Stability, Wear Resistant, Low Deformation Tendency, High Tolerance, Odorless, High Performance, Excellent Hydrolysis Resistance, Dimensional Stability, Chemical Resistant, Service Life Extension, Non Abrasive, Low Friction
Density:
2320.0 - 2320.0 kg/m³
Tensile Modulus:
1750.0 - 1750.0 MPa
Color:
Tan
Fluorosint® 500 is an advanced polymer material that combines the excellent chemical resistance, low friction, and high temperature properties of PTFE (polytetrafluoroethylene) with added stability and wear resistance. This material is designed to excel in demanding applications where high performance, reliability, and tight dimensional control are required.Key features:Nine times greater resistance to deformation under load than unfilled PTFE: provides excellent wear and deformation resistanceLow coefficient of linear thermal expansion: approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, eliminating fit and clearance problems for designersPTFE base: provides excellent chemical resistance, low friction, and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionBenefits:High resistance to deformation under load, making it ideal for sealing applications where tight dimensional control is requiredLow coefficient of linear thermal expansion, eliminating fit and clearance problems in high temperature and dynamic environmentsEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:Sealing applications where tight dimensional control is requiredHigh temperature and dynamic environments where fit and clearance are a concernChemical processing industries where high chemical and hydrolysis resistance is neededAny application that requires stability and wear resistance in harsh environments.Fluorosint® 500 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. With its added stability and wear resistance, Fluorosint® 500 is an excellent choice for applications in chemical processing, aerospace, automotive and other industries where tight dimensional control and high-performance sealing are required.
Mitsubishi Chemical Group Corporation
Ketron® GF30 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
Creep Resistant, Corrosion Resistant, Good Stability, High Strength, High Tolerance, Odorless, Dimensional Stability, Chemical Resistant, High Stiffness, High Flexural Modulus
Density:
1510.0 - 1510.0 kg/m³
Tensile Modulus:
7.0 - 7.0 MPa
Color:
Black
Ketron® GF30 Polyetheretherketone PEEK, a 30% glass fiber reinforced grade that offers excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. This material is designed for applications where high strength, stiffness, and stability are needed, especially at high temperatures. Features: 30% glass fiber reinforced for added strength and stiffness Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Low expansion rate and high flexural modulus Suitable for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 300°F / 150°C Benefits: Offers improved strength, stiffness, and stability in high temperature applications Low expansion rate and high flexural modulus make it suitable for structural applications Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Applications: Structural applications Aerospace industry Automotive industry Medical industry Industrial machinery Chemical processing Ketron® GF30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions, especially at high temperatures. Whether you are looking to improve the performance of your structural applications in the aerospace, automotive, medical, industrial machinery or chemical processing industries, Ketron® GF30 PEEK is the ideal solution.
Mitsubishi Chemical Group Corporation
Ertalyte® Sterra™ PET
Polymer Name:
Polyethylene Terephthalate (PET)
Color:
Black
Physical Form:
Rods, Bars
Ertalyte® Sterra™ PET is an unreinforced, semi-crystalline grade that is produced from proprietary resin grades made by Mitsubishi Chemical Advanced Materials. Characterized by its excellent wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, this grade is capable of sustaining high loads and retains more of its original strength up to 180°F (85°C) than nylons or acetals. Due to these characteristics, Ertalyte® Sterra™ PET components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing and packaging, and oil and gas industries. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.
Mitsubishi Chemical Group Corporation
Ertalon® 66 SA PA66
Polymer Name:
Polyamide 66 (PA 66)
Physical Form:
Tube, Plates, Rods
Features:
Food Contact Acceptable, Excellent Stiffness, High Melting Point, Wear Resistant, High Strength, Excellent Mechanical Strength, Radiation Resistant, Excellent Toughness, Electrically Insulating, Good Machinability, X-Ray Shielding, Good Sliding Properties, Good Damping, High Hardness, High Fatigue Resistance
Density:
1140.0 - 1140.0 kg/m³
Tensile Modulus:
3550.0 - 3550.0 MPa
Ertalon® 66 SA / Nylatron® 101 Polyamide PA66 unmodified shapes are characterized by their superior combination of strength and toughness. Compared to other unmodified nylon grades, Nylatron® 101 PA66 / Ertalon® 66 SA PA66 components possess superior mechanical strength, stiffness, wear resistance, in addition to displaying one of the highest melting points of all PA66 materials. Due to these properties, and this grade’s FDA and EU food compliant composition, Nylatron® 101 PA66 / Ertalon® 66 SA PA66 is often specified for screw machined electrical insulators, bushings, bearings, gears, roller wheels, star wheels, and seals.
Mitsubishi Chemical Group Corporation
Semitron® MP-370
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates
Features:
Good Stability, Low Moisture Absorption, High Strength, High Tolerance, Odorless, Excellent Toughness, High Performance, Good Machinability, Dimensional Stability, Good Thermal Stability
Density:
1650.0 - 1650.0 kg/m³
Tensile Modulus:
4450.0 - 4450.0 MPa
Color:
Grey
Semitron® MP 370 shapes exhibit excellent moisture absorption and thermal resistance, while also maintaining outstanding strength and dimensional stability. As a result, this grade is often selected for test socket applications where precision machining is critical, and complex geometries are prevalent.Features:Excellent moisture absorptionHigh thermal resistanceOutstanding strength and dimensional stabilityExcellent machinabilityBenefits:Allows for precision machining and complex geometries in test socket applicationsProvides greater strength and dimensional stability compared to unfilled PEEK materialsLow internal stresses and no "soft center" issues associated with injection molded blanksApplications:Test sockets for the semiconductor manufacturing industryPrecision machining and complex geometries in various industries where high thermal resistance and moisture absorption are required.
Mitsubishi Chemical Group Corporation
Nylatron® GSM Blue PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Tube, Plates, Rods
Features:
Lubricated, Good Mechanical Properties, Low Coefficient of Friction, High Strength, Improved Wear, Excellent Toughness, Good Electrical Properties, High Pressure Applications
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3446.0 - 3446.0 MPa
Color:
Blue
Nylatron® GSM Blue PA6 is a unique and advanced bearing grade that offers exceptional frictional characteristics, low coefficient of friction, and a low "k" factor. This makes it an ideal solution for high pressure and low speed applications, such as slide pads, thrust washers, and trunnion bearings. Additionally, it is also an excellent choice for bearing and wear parts in a wide range of automated equipment applications.Features:Superior frictional characteristicsLow coefficient of frictionGreater limiting PVLow "k" factorBroadest size range availabilityDark blue in colorBenefits:Ideal for high pressure and low speed applicationsExcellent wear resistanceGood mechanical and electrical propertiesIdeal balance of strength and toughnessLow coefficient of frictionApplications:Slide padsThrust washersTrunnion bearingsBearing and wear parts in automated equipment applications.
Mitsubishi Chemical Group Corporation
Duratron® T4203 PAI
Polymer Name:
Polyamide-imide (PAI)
Physical Form:
Tube, Plates, Rods
Features:
High Temperature Resistance, Good Impact Strength, Good Abrasion Resistance, Creep Resistant, Low Thermal Expansion, Good Compressive Strength, Wear Resistant, High Strength, High Tolerance, High Loading Absorption Capability, High Elongation, Odorless, Excellent Toughness, Electrically Insulating, Good Machinability, Dimensional Stability
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
4200.0 - 4200.0 MPa
Color:
Brown
Duratron® T4203 PAI is a polyamide-imide material that offers exceptional strength and durability in high-tech equipment and structural applications. With features such as high impact strength, high elongation, and dimensional stability, it is a reliable choice for precision parts and components that require high performance in extreme conditions.Features:High impact strengthHigh elongationDimensional stabilityHigh temperature resistanceExceptional machinabilityBenefits:Able to withstand extreme conditions and loadsIdeal for precision parts and components in high-tech equipmentSuitable for structural applications such as linkages and seal ringsExcellent choice for wear applications involving impact loading and abrasive wearApplications:Electrical connectors and insulatorsStructural components such as linkages and seal ringsWear applications involving impact loading and abrasive wearPrecision parts in high-tech equipment
Mitsubishi Chemical Group Corporation
Ketron® LSG PEEK-CLASSIX™ White
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
Biocompatible, Good Mechanical Properties, Gamma Sterilizable, Life Science Grade, Plasma Gas Sterilizable, Excellent Mechanical Strength, Steam Sterilizable, Ethylene Oxide Sterilizable, Heat Sterilizable, Excellent Sterilization Resistance, Chemical Resistant, High Stiffness, X-Ray Sterilizable
Density:
1390.0 - 1390.0 kg/m³
Tensile Modulus:
4600.0 - 4600.0 MPa
Color:
White
Ketron® LSG PEEK-CLASSIX™ White is a product available in the form of plates and rods, designed for dental applications. This material is characterized by features like ethylene oxide sterilizability, biocompatibility, excellent sterilization resistance, X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, good mechanical properties, steam sterilizability, heat sterilizability, plasma gas sterilizability, and chemical resistance. It comes in the color white, making it suitable for dental applications.
Mitsubishi Chemical Group Corporation
Ketron® LSG PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
X-Ray Sterilizable, Heat Resistance, Biocompatible, Gamma Sterilizable, Life Science Grade, Plasma Gas Sterilizable, Excellent Mechanical Strength, Steam Sterilizable, Ethylene Oxide Sterilizable, Heat Sterilizable, Chemical Resistant, High Stiffness
Density:
1310.0 - 1310.0 kg/m³
Tensile Modulus:
4300.0 - 4300.0 MPa
Color:
Yellow, Green, Red, Black, Beige, Blue
Ketron® LSG PEEK is a product available in the form of plates and rods, offering exceptional heat and excellent sterilization resistance through methods like steam, dry heat, ethylene oxide, plasma, gamma, and x-ray. It comes in various colors, including beige, black, blue, red, green, and yellow. The material is characterized by features such as ethylene oxide sterilizability, biocompatibility, X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, heat resistance, steam sterilizability, heat sterilizability, plasma gas sterilizability, chemical resistance. Its main applications include equipment and parts, especially connectors.
Mitsubishi Chemical Group Corporation
Ketron® CM GF30 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
Creep Resistant, Corrosion Resistant, Good Stability, High Strength, High Tolerance, Odorless, Dimensional Stability, Chemical Resistant, High Stiffness, High Flexural Modulus
Density:
1590.0 - 1590.0 kg/m³
Tensile Modulus:
5858.2 - 5858.2 MPa
Color:
Black
Ketron® CM GF30 Polyetheretherketone PEEK, a compression-molded, 30% glass fiber reinforced grade that offers excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. This brownish-grey colored material is designed for applications where high strength, stiffness, and stability are needed in extreme environments. Features: 30% glass fiber reinforced for added strength and stiffness Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Low expansion rate and high flexural modulus Suitable for large structural applications that require superior strength, stiffness, and stability Benefits: Offers a higher stiffness and creep resistance than Ketron 1000 PEEK Has a much better dimensional stability Ideal for structural applications carrying high static loads for long periods of time at elevated temperatures Applications: Structural applications Aerospace industry Automotive industry Medical industry Industrial machinery Chemical processing Ketron® CM GF30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your structural applications in the aerospace, automotive, medical, industrial machinery or chemical processing industries, Ketron® CM GF30 PEEK is the ideal solution. However, it is important to note that the glass fibers tend to abrade the mating surface so the suitability for sliding parts should be carefully examined.
Mitsubishi Chemical Group Corporation
Semitron® ESd 480 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Rods, Tube, Plates
Features:
Dimensional Stability, Chemical Resistant, ESD Protection, High Tolerance, Static-Dissipative, Odorless
Density:
1460.0 - 1460.0 kg/m³
Tensile Modulus:
5900.0 - 5900.0 MPa
Color:
Black
Semitron® ESd 480 Polyetheretherketone PEEK electro static dissipative shapes are a top choice for critical test fixture and wafer handling applications in wet process tools, where static dissipation is critical. These shapes are specifically designed to provide excellent chemical resistance properties and high dimensional stability under varying environmental conditions.Features:Excellent chemical resistance propertiesHigh dimensional stability under varying environmental conditionsSurface resistivity: 106 - 109 ohms/sqBenefits:Ideal for critical test fixture and wafer handling applications in wet process toolsProvides a dissipative range of 106 - 109 ohms/sq, ensuring static dissipation is criticalDimensionally stable, making it ideal for critical test fixture applicationsApplications:Test fixture and wafer handling applications in wet process toolsStructural applications in wet process tools where static dissipation is importantWell-suited for use in wafer handling and other structural applications in wet process tools where static dissipation is important.
Mitsubishi Chemical Group Corporation
Ertalon® 6 SA PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Rods, Tube, Plates
Features:
Electrically Insulating, Good Machinability, Chemical Resistant, X-Ray Shielding, Good Sliding Properties, Good Damping, High Hardness, High Fatigue Resistance, General Purpose, Creep Resistant, Excellent Stiffness, Wear Resistant, Excellent Mechanical Strength, Radiation Resistant, Excellent Toughness
Density:
1140.0 - 1140.0 kg/m³
Tensile Modulus:
3300.0 - 3300.0 MPa
Ertalon® 6 SA is a high-performance polyamide (PA6) material that boasts a combination of excellent mechanical, electrical and chemical properties. Its exceptional mechanical strength, stiffness, toughness and damping properties make it a versatile choice for a wide range of mechanical construction and maintenance applications.Features:Superior mechanical strength and stiffnessExcellent toughness and damping propertiesResistance to creep and wearExcellent electrical insulationOutstanding chemical resistanceBenefits:Durable and long-lasting performance in demanding mechanical applicationsExcellent resistance to wear and tear, even in harsh environmentsHigh level of electrical insulation for safety and reliabilityResistant to a wide range of chemicals, making it suitable for a variety of applicationsApplications:Mechanical construction and maintenanceIndustrial equipment and machineryAutomotive and transportation componentsElectrical and electronic componentsGeneral engineering and manufacturing
Mitsubishi Chemical Group Corporation
TIVAR® Sterra™ ESD UHMW-PE
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Color:
Black
Physical Form:
Profiles
TIVAR® Sterra™ ESD UHMW-PE are electrostatic dissipative shapes produced from reprocessed industrial UHMW materials and repurposed for use in a variety of industries, such as agriculture and grain handling, bulk material handling, and parcel handling. As a premium grade that is both economical and eco-friendly, TIVAR® Sterra™ ESD UHMW-PE components exhibit excellent abrasion and corrosion resistance, outstanding impact strength, minimal moisture absorption, and a low coefficient of friction. For these reasons, TIVAR® Sterra™ ESD UHMW-PE is often a favored solution for conveyor, chute, and hopper applications, where electrical charge build-ups are prevalent. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.
Mitsubishi Chemical Group Corporation
Ketron® Sterra™ 1000 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Color:
Grey
Physical Form:
Rods, Bars, Plates
Ketron® Sterra™ 1000 PEEK is an unfilled, general-purpose grade known for its exceptional elongation and toughness. It is ideal for instrument and seal components, where ductility and inertness are crucial. Ketron® Sterra™ 1000 PEEK portfolio, featuring recycled content for a reduced carbon footprint compared to non-recycled materials.
Mitsubishi Chemical Group Corporation
Acetron® C Sterra™ POM-C
Polymer Name:
Polyacetal Copolymer (POM)
Color:
Black
Physical Form:
Rods, Bars
Acetron® C Sterra™ POM-C is a general-purpose copolymer acetal grade that is often favored for its porosity-free nature. Acetron® C Sterra™ POM-C shapes offer low moisture and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.
Mitsubishi Chemical Group Corporation
Ertalon® 6PLA PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Rods, Tube, Plates
Features:
Radiation Resistant, Excellent Toughness, Electrically Insulating, Good Machinability, X-Ray Shielding, Heat Aging Resistant, Good Sliding Properties, Good Damping, High Hardness, High Fatigue Resistance, Food Contact Acceptable, Creep Resistant, Excellent Stiffness, Wear Resistant, High Strength, Excellent Mechanical Strength
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3600.0 - 3600.0 MPa
Ertalon® 6PLA / Nylatron® MC 907 is a high-performance, unmodified cast nylon 6 grade that offers exceptional strength, hardness, creep resistance, and heat aging properties. This grade is also FDA and EU food contact compliant, making it ideal for use in the food processing and packaging industry.Features:High mechanical strength, stiffness, and hardnessGood resistance to creep, wear, fatigue, and heat agingGood sliding properties and machinabilityElectrical insulation and resistance to gamma and x-ray radiationBenefits:Can withstand high loads and extreme temperaturesProvides reliable performance in harsh environmentsEasy to machine for custom applicationsSafe for use in food contact applicationsApplications:Gears, rollers, wheels, bearings, and conveyor wear parts in the food processing and packaging industryOther applications that require high strength and hardness, such as sleeve and slide bearings, wear pads, rollers, pulleys, scrapers, gear wheels, sprockets, star wheels, and insulators.
Mitsubishi Chemical Group Corporation
Semitron® CMP XL20
Polymer Name:
Polyamide-imide (PAI)
Physical Form:
Rods, Tube, Plates
Features:
High Stiffness, Wear Resistant, High Strength, High Tolerance, Cost Effective, Odorless
Density:
1400.0 - 1400.0 kg/m³
Tensile Modulus:
3962.9 - 3962.9 MPa
Color:
Green
Semitron® CMP XL20 Polyamideimide PAI shapes were specifically developed for CMP ring applications in the semiconductor and electronics industry, due to their excellent long wear life in CMP slurries. In addition to these characteristics, Semitron® CMP XL20 PAI components display high strength and stiffness, and outstanding wear resistance over a broad range of temperatures, making this grade the ideal solution for dynamic applications in process environments.Features:Specifically developed for CMP ring applications in the semiconductor and electronics industryExcellent long wear life in CMP slurriesHigh strength and stiffnessOutstanding wear resistance over a broad range of temperaturesBenefits:Ideal solution for dynamic applications in process environmentsSignificantly lower cost per waferOutperforms PPS up to 20x in most processesPromotes fewer edge defects and better uniformityApplications:CMP ring applications in the semiconductor and electronics industryCan be used in clamp rings, trench rings, screws, pins, and shower headsSuitable for use in centering pins, focus rings, insulators, vacuum pads, and wafer guides.
Mitsubishi Chemical Group Corporation
Techtron® 1000 PPS
Polymer Name:
Polyphenylene Sulfide (PPS)
Physical Form:
Rods, Plates
Features:
Anti-Wear Properties, Low Thermal Expansion, Good Machinability, Dimensional Stability, Corrosion Resistant, Low Moisture Absorption, High Tolerance
Density:
1350.0 - 1350.0 kg/m³
Tensile Modulus:
4000.0 - 4000.0 MPa
Color:
Natural
Techtron® 1000 PPS is a high-performance polymer known for its excellent dimensional stability, chemical resistance, and easy machinability. It is a unfilled grade of Polyphenylene Sulfide (PPS) and is ideal for a wide range of applications where precision and durability are required.Key features:Outstanding dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion make it easy to maintain tight tolerances.Easy machinability: this material can be machined to close tolerances, making it suitable for precise components.Corrosion resistance: due to its chemical resistance, this material is ideal for use in corrosive environments.Benefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals and moistureEnhanced precision and dimensional stabilityImproved machinability and tight tolerance controlApplications:Structural parts in corrosive environments such as chemical processing and oil and gas industry.Precision components and machine parts that require dimensional stability, wear and chemical resistanceElectrical components, as it has good electrical insulation and dielectric properties.Automotive and aerospace components as it can withstand high temperatures.Techtron® 1000 is a versatile and reliable material that can help improve the performance and longevity of your products, it's available in a range of shapes and sizes, making it easy to incorporate into your designs.
Mitsubishi Chemical Group Corporation
Ertalon® 4.6 PA4.6
Polymer Name:
Polyamide 46 (PA 46)
Physical Form:
Plates, Rods
Features:
X-Ray Shielding, Heat Aging Resistant, Good Sliding Properties, Good Damping, High Hardness, High Fatigue Resistance, Creep Resistant, Excellent Stiffness, Wear Resistant, Excellent Mechanical Strength, Radiation Resistant, Excellent Toughness, Electrically Insulating, Good Machinability
Density:
1190.0 - 1190.0 kg/m³
Tensile Modulus:
3400.0 - 3400.0 MPa
Ertalon® 4.6 and Nylatron® 4.6 are advanced polyamide PA46 shapes that are known for their superior heat aging resistance and ability to retain outstanding stiffness and creep resistance over a wide range of temperatures.Features:Superior heat aging resistanceRetains outstanding stiffness and creep resistance at high temperaturesOutperforms PA6, PA66, POM, and PET in extreme environmentsBenefits:Ideal for use in extreme environments where traditional materials fall shortCan withstand high temperatures without losing mechanical propertiesSuitable for a wide range of applications, including bushings, bearings, gears, pulleys, sheaves, wear pads, valve seats, seals, and conveyor wear componentsApplications:Bushings and bearings in extreme temperature environmentsGears and pulleys in high-heat industrial settingsWear pads and valve seats in harsh chemical environmentsSeals and conveyor wear components in high-temperature applications.
Mitsubishi Chemical Group Corporation
Techtron® HPV PPS
Polymer Name:
Polyphenylene Sulfide (PPS)
Physical Form:
Plates, Rods
Features:
Food Contact Acceptable, Lubricated, Low Flammability, Low Coefficient of Friction, Wear Resistant, Excellent Dielectric Properties, High Tolerance, Odorless, Excellent Hydrolysis Resistance, Electrically Insulating, Dimensional Stability, Chemical Resistant
Density:
1420.0 - 1420.0 kg/m³
Tensile Modulus:
4000.0 - 4000.0 MPa
Color:
Blue
Techtron® HPV PPS is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added wear resistance and strength of glass fiber reinforcement and internal lubrication. This compression-molded material is designed to excel in demanding environments and applications where wear resistance and dimensional stability are required.Key features:Superior wear resistance: internally lubricated and glass fiber-reinforced, allowing it to withstand high loads and minimize wear and tearOutstanding chemical and hydrolysis resistance: suitable for use in harsh environments and chemicalsExcellent dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerancesGreat electrical insulating and dielectric propertiesLow coefficient of friction and inherent low flammabilityGlass fiber reinforced: increased strength and stiffness, ideal for wear componentsFood grade availableBenefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion, and wearEnhanced precision and dimensional stabilityImproved electrical insulation and dielectric propertiesReduced friction and lower flammability riskMore cost-effective than advanced engineering plastics for certain applicationsApplications:Wear components such as bushings and bearings, CIP wash down parts, and pump, valve, and compressor applications in the aerospace, food processing, and oil and gas industries.Industrial equipment such as industrial drying and food processing ovens (bearings, rollers, etc.)Chemical process equipment (pump-, valve & compressor components)Electrical insulating systemsCost-effective alternative to advanced engineering plastics in certain applicationsTechtron® HPV is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, including food grade, making it easy to incorporate into your designs.
Mitsubishi Chemical Group Corporation
Sultron® LSG PSU
Polymer Name:
Polysulfone (PSU)
Physical Form:
Plates, Rods
Features:
Excellent Transparency Properties, Biocompatible, Good Mechanical Properties, Gamma Sterilizable, Hydrolysis Resistant, Life Science Grade, Plasma Gas Sterilizable, Steam Sterilizable, Ethylene Oxide Sterilizable, Excellent Thermal Properties, Heat Sterilizable, Good Electrical Properties, Excellent Sterilization Resistance, X-Ray Sterilizable
Density:
1240.0 - 1240.0 kg/m³
Tensile Modulus:
2850.0 - 2850.0 MPa
Color:
Yellow, Translucent
Sultron® LSG PSU offers a variety of features that make it a suitable material for medical devices and assemblies. It exhibits excellent sterilization resistance, X-ray sterilizability, life science grade, excellent transparency properties, gamma sterilizability, good mechanical properties, steam sterilizability, heat sterilizability, plasma gas sterilizability, excellent thermal properties, good electrical properties, ethylene oxide sterilizability, biocompatibility, and hydrolysis resistance. It is a product available in yellow and translucent colors and can be found in the physical forms of plates and rods.
Mitsubishi Chemical Group Corporation
Semitron® MPR-1000
Polymer Name:
Polyamide-imide (PAI)
Physical Form:
Plates, Rods
Features:
Very Good Heat Resistance, High Tolerance, High Durability, Chipping Resistance, Low Outgassing, Good Machinability
Density:
1470.0 - 1470.0 kg/m³
Tensile Modulus:
6050.0 - 6050.0 MPa
Color:
Yellow, Brown
Semitron® MPR 1000 - an advanced engineering material that is specially developed for use in the semiconductor and electronics industry. This material boasts excellent heat resistance and low erosion rates in plasma chambers, making it a top choice for vacuum chamber applications such as etch, CVD, and ion implant.Features:Longevity: Increased life in plasma chambers (up to 25X over polyimide in ozone)Clean: Low ionic metal content and low out-gassingValue: Lower overall cost in use compared to traditional materials used in vacuum chamber applications such as quartz, ceramics, and engineering plasticsBenefits:Long-lasting performance in plasma-based vacuum chambersLow maintenance and cost-effective solutionClean and efficient, suitable for semiconductor and electronics industryApplications:Clamp ringsTrench ringsScrewsPinsShower headsCentering pinsFocus ringsInsulatorsVacuum padsWafer guidesSemitron® MPR 1000 is a versatile material that is ideal for use in vacuum chamber applications within the semiconductor and electronics industry. With its outstanding heat resistance and low erosion rates, this material is a cost-effective and efficient solution that ensures longevity and clean performance in plasma-based vacuum chambers.
Mitsubishi Chemical Group Corporation
Ketron® CM CA30 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
Low Thermal Expansion, Good Heat Dissipation, High Impact Resistance, Good Compressive Strength, Corrosion Resistant, Wear Resistant, High Strength, High Tolerance, Odorless, Chemical Resistant, High Stiffness, Good Thermal Conductivity, Abrasion Resistant
Density:
1420.0 - 1420.0 kg/m³
Tensile Modulus:
9648.8 - 9648.8 MPa
Color:
Black
Ketron® CM CA30 Polyetheretherketone PEEK, a compression-molded, 30% carbon fiber-reinforced grade that offers exceptional impact, corrosion, chemical, and wear resistance. This black-colored material is designed for applications where high strength, stiffness, and thermal conductivity are needed. Features: 30% carbon fiber reinforced for added strength and stiffness Outstanding impact, corrosion, chemical, and wear resistance Reduced thermal expansion for improved performance High thermal conductivity for rapid heat dissipation Suitable for large parts and bearing applications Benefits: Extends the life of components by resisting wear and corrosion Improves pressure-velocity capabilities and bearing life by dissipating heat faster Provides 3.5 times higher thermal conductivity compared to unreinforced PEEK Offers even higher stiffness, mechanical strength, and creep resistance than Ketron GF30 PEEK Applications: Bearing applications Large parts Automotive industry Aerospace industry Medical industry Industrial machinery Chemical processing Ketron® CM CA30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your bearing applications, need a strong and stiff material for large parts or are in the automotive, aerospace, medical, industrial machinery or chemical processing industries, Ketron® CM CA30 PEEK is the ideal solution.
Mitsubishi Chemical Group Corporation
Ketron® Sterra™ HPV PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Additives Included:
Lubricant (PTFE), Lubricant (Graphite)
Fillers Included:
Carbon Fiber
Color:
Black
Physical Form:
Plates
Ketron® Sterra™ HPV PEEK shapes are carbon fiber reinforced with graphite and PTFE lubricants. This gives them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron® Sterra™ HPV PEEK’s combination of low wear, low friction, and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves, and seals. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.
Mitsubishi Chemical Group Corporation
Ketron® HPV PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
Low Coefficient of Friction, Wear Resistant, High Tolerance, Low Friction, Odorless, Lubricated, Good Machinability
Density:
1450.0 - 1450.0 kg/m³
Tensile Modulus:
5900.0 - 5900.0 MPa
Color:
Black
Ketron® HPV Polyetheretherketone PEEK shapes, a carbon fiber reinforced, graphite and PTFE lubricated material that offers the lowest coefficient of friction and the best machinability of all PEEK materials. This black-colored material is designed for applications where low wear and friction, and high pressure-velocity capabilities are needed. Features: Carbon fiber reinforced with graphite and PTFE lubricants Lowest coefficient of friction and best machinability of all PEEK materials Excellent tribological properties (low friction, long wear and high pressure-velocity capabilities) Benefits: Improves the performance of service bearings, bushings, insulators, valves, and seals with its combination of low wear and friction and high LPV Long wear and high pressure-velocity capabilities make it suitable for wear and friction applications The carbon fibers, PTFE and graphite lubrication results in a Ketron PEEK "Bearing Grade" Applications: Service bearings Bushings Insulators Valves Seals Wear and friction applications Ketron® HPV PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your service bearings, bushings, insulators, valves, and seals or need a material suitable for wear and friction applications, Ketron® HPV PEEK is the ideal solution.
Mitsubishi Chemical Group Corporation
Ketron® CA30 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
Low Thermal Expansion, Good Heat Dissipation, High Impact Resistance, Good Compressive Strength, Corrosion Resistant, Wear Resistant, High Strength, High Tolerance, Odorless, Chemical Resistant, High Stiffness, Good Thermal Conductivity, Abrasion Resistant
Density:
1400.0 - 1400.0 kg/m³
Tensile Modulus:
9200.0 - 9200.0 MPa
Color:
Black
Ketron® CA30 Polyetheretherketone PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance that Ketron® GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications.
Mitsubishi Chemical Group Corporation
Acetron® GP POM-C
Polymer Name:
Polyacetal Copolymer (POM)
Physical Form:
Rods, Tube, Plates
Features:
Good Machinability, Low Moisture Absorption, High Strength, Non-porous, Improved Wear, General Purpose, Food Contact Acceptable, Excellent Stiffness
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
3000.0 - 3000.0 MPa
Acetron® GP Polyoxymethylene POM-C / Ertacetal® C Polyoxymethylene POM-C - the ultimate general-purpose, copolymer acetal grade that offers unparalleled performance and versatility.Features:Porosity free nature ensures a high-quality finish and long-lasting durabilityLow moisture absorption ensures that your components remain stable and dimensionally accurate, even in humid environmentsExcellent machinability allows for easy processing, reducing costs and increasing efficiencyBenefits:The porosity-free nature of Acetron® GP POM-C makes it ideal for Food Contact and medical applications, meeting FDA, NSF, Canada AG, and SSI Standard compliance requirementsThe low moisture absorption capability of this material ensures that your components remain stable and dimensionally accurate, even in humid environments, increasing the lifespan of your productThe excellent machinability of Acetron® GP POM-C makes it easy to process, reducing costs and increasing efficiency in your manufacturing processApplications:Food Contact and Medical ApplicationsBearings and BushingsGears and Electrical ComponentsMedical and Diagnostic EquipmentValves and Fluid Handling Components"
Mitsubishi Chemical Group Corporation
Sultron® LSG R5500 PPSU
Polymer Name:
Polyphenylsulfone (PPSU)
Physical Form:
Parts & Shapes
Features:
X-Ray Sterilizable, High Ductility, Biocompatible, Gamma Sterilizable, Hydrolysis Resistant, Life Science Grade, Plasma Gas Sterilizable, Acid Resistant, Alkali Resistant, Steam Sterilizable, Ethylene Oxide Sterilizable, Heat Sterilizable, Excellent Sterilization Resistance
Density:
1290.0 - 1290.0 kg/m³
Tensile Modulus:
2450.0 - 2450.0 MPa
Color:
Grey, Blue, Off White, Yellow, Green, Orange, Brown, Red, Black
Sultron® LSG R5500 PPSU Black BK937 is designed for healthcare and pharmaceutical applications. It offers numerous features, including high ductility, ethylene oxide sterilizability, biocompatibility, hydrolysis resistance, excellent sterilization resistance, X-ray sterilizability, alkali resistance, life science grade, gamma sterilizability, steam sterilizability, acid resistance, heat sterilizability, and plasma gas sterilizability. It comes in various colors, including gray, black, orange, brown, blue, red, green, yellow, and off-white, and is a product available in the physical form of parts and shapes.
Mitsubishi Chemical Group Corporation
Ketron® Sterra™ CA30 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Fillers Included:
Carbon Fiber
Color:
Brown, Grey
Physical Form:
Rods, Bars, Plates
Ketron® Sterra™ CA30 PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance than Ketron GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® Sterra™ CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.
Mitsubishi Chemical Group Corporation
Altron™ PC
Polymer Name:
Polycarbonate (PC)
Physical Form:
Plates
Features:
High Impact Resistance, Low Moisture Absorption, High Strength, Excellent Dielectric Properties, Amorphous, Acid Resistant, High Tolerance, UV Stabilized, Good Electrical Properties, High Modulus of Elasticity, Good Impact Strength
Density:
1200.0 - 1200.0 kg/m³
Tensile Modulus:
2400.0 - 2400.0 MPa
Color:
Transparent
Altron™ 1000 PC machine grade polycarbonate is a transparent, amorphous thermoplastic that offers exceptional impact strength and elasticity, minimal moisture absorption, and outstanding resistance to acidic solutions. This grade is produced from select batches of non-UV stabilized polycarbonate resin that complies with EU and FDA regulations for plastics intended to come into contact with food products.Features:Transparent, amorphous thermoplasticSuperior impact strengthSuperior flexural modulus of elasticityMinimal moisture absorptionOutstanding resistance to acidsGreat electrical characteristicsBenefits:Durable and able to withstand high impactsResistant to deformation under loadLow moisture absorption means no swelling or warpingResistant to acidic solutions, making it suitable for a variety of applicationsExcellent electrical characteristics, making it suitable for semiconductor and electronics applicationsApplications:Semiconductor and electronics applicationsTransparent structural applicationsFood contact applications that comply with EU and FDA regulations
Mitsubishi Chemical Group Corporation
Kyron® GC100
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates
Features:
High Tolerance, Good Machinability, High Stiffness, Good Stability, Low Moisture Absorption
Tensile Modulus:
7579.0 - 7579.0 MPa
Kyron® GC100 Polyetheretherketone PEEK - Superior Dimensional Stability and Micro-Machinability for Semiconductor and Electronics ApplicationsFeatures:Unfilled injection molded shapesSuperior dimensional stability and stiffnessExcellent micro-machinability capabilities due to low CTE and tensile elongationBenefits:Specifically formulated for the semiconductor and electronics industryIdeal solution for burn in and test socket applications where precision machining is requiredApplications:Burn in and test socket applications in the semiconductor and electronics industryAny application requiring precision machining and excellent dimensional stability and stiffness.
Mitsubishi Chemical Group Corporation
Fluorosint® MT-01 PTFE
Polymer Name:
Polytetrafluoroethylene (PTFE)
Physical Form:
Plates, Rods
Features:
High Temperature Strength, Good Mechanical Properties, Good Stability, High Strength, High Tolerance, Anti-Wear Properties, Odorless, High Performance, High Stiffness
Density:
2270.0 - 2270.0 kg/m³
Tensile Modulus:
1900.0 - 1900.0 MPa
Color:
Black
Fluorosint® MT-01 is an advanced polymer material that combines the excellent chemical resistance, low friction and high temperature properties of PTFE (polytetrafluoroethylene) with the added strength, stiffness and stability. This material is designed to excel in demanding applications where high performance and reliability are required.Key features:High strength and stiffness: provides superior mechanical performance at elevated temperaturesPTFE base: provides excellent chemical resistance, low friction and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear, impact and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:High-performance seat, seal and wear applications where extreme conditions are present such as high temperature, pressure and chemical exposureComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesComponents that need high chemical resistance, low friction, and high temperature properties such as valves, pumps, and heat exchangers.Fluorosint® MT-01 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. It's also important to mention that the temperature and chemical resistance can vary depending on the grade of PTFE used as well as other additives, always consult with the manufacturer for the exact properties of the final material.
Mitsubishi Chemical Group Corporation
Nylatron® 703 XL PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Plates
Features:
Bearing Grade, Wear Resistant, High Strength, High Loading Absorption Capability, Excellent Toughness, Low Thermal Expansion, High Performance, Good Electrical Properties, Good Mechanical Properties
Density:
1110.0 - 1110.0 kg/m³
Tensile Modulus:
2750.0 - 2750.0 MPa
Nylatron® 703 XL, a unique, ultra-high performance bearing grade made from Polyamide PA6. This material offers exceptional wear resistance, even better than Nylatron® NSM, while also providing superior load bearing capabilities and a near zero level of stick-slip.Features:Ultra-high performance bearing gradeBetter wear resistance than Nylatron® NSMSuperior load bearing capabilitiesNear zero level of stick-slipBenefits:Provides an extraordinary amount of motion control for high-precision applicationsElimination of stick-slip improves performance in high-precision applicationsIdeal for wear-intensive applicationsApplications:Wear padsConveyor componentsCorner tracksPneumatic control surfacesConstruction and heavy equipment marketsMade from a high performance cast nylon 6, Nylatron 703 XL is suitable for heavy-duty, high-load and high-speed applications where the highest level of wear resistance and load-bearing capabilities are required. It offers improved performance and longer service life than other materials. It is a cost-effective solution for construction, heavy equipment and other industrial markets that demand high-performance and durability.
Mitsubishi Chemical Group Corporation
Duratron® U2200 PEI
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Plates, Rods
Features:
Food Contact Acceptable, Low Thermal Expansion, Low Odor, Amorphous, High Tolerance, Dimensional Stability, High Strength to Weight Ratio, High Temperature Resistance, High Tensile Strength, High Rigidity
Density:
1410.0 - 1410.0 kg/m³
Color:
Brown
Duratron® U2200 PEI Polyetherimide shapes, a high-performance plastic that offers exceptional rigidity, dimensional stability, high temperature resistance, and a low Coefficient of Linear Thermal Expansion. With 20% glass-reinforcement, Duratron® U2200 PEI is a versatile and durable material that is suitable for a wide range of applications.Features:20% glass-reinforced for exceptional rigidity and dimensional stabilityHigh temperature resistanceLow Coefficient of Linear Thermal ExpansionExceptional strength-to-weight ratio and increased tensile strengthGreat electrical insulatorBenefits:Versatile and durable material that can withstand harsh conditionsIdeal for semiconductor and electronics applications where dimensional stability, low thermal expansion and electrical insulation is importantSuitable for a wide range of applicationsApplications:Semiconductor and electronics applicationsElectrical insulationApplications that require dimensional stability, high temperature resistance and low thermal expansionDuratron® U2200 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions. Whether you are looking to improve the performance of your semiconductor and electronics applications or need a material that can withstand high temperatures and harsh environments while providing electrical insulation, Duratron® U2200 PEI is the ideal solution.
Mitsubishi Chemical Group Corporation
TIVAR® Sterra™ UHMW-PE
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Color:
Green
Physical Form:
Plates
TIVAR® Sterra™ UHMW-PE shapes are produced from reprocessed industrial UHMW materials and repurposed for use in a variety of industries, such as construction and heavy equipment, agriculture and grain handling, bulk material and parcel handling, automotive, and transportation. As a premium grade that is both economical and eco-friendly, TIVAR® Sterra™ UHMW-PE components exhibit excellent abrasion and corrosion resistance, outstanding impact strength, minimal moisture absorption, and a low coefficient of friction. For these reasons, TIVAR® Sterra™ UHMW-PE is often a favored solution for wear and outrigger pads, strips, rails, and guides, rollers, conveyors, chutes, hoppers, impact plates, and asphalt equipment components. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.
Mitsubishi Chemical Group Corporation
TIVAR® Sterra™ DrySlide UHMW-PE
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Additives Included:
Lubricant (Unspecified)
Color:
Black
Physical Form:
Plates
TIVAR® Sterra™ DrySlide UHMW-PE is an internally lubricated product. This lubricant is built into the PE-UHMW matrix with a higher molecular weight. It offers a lower coefficient of friction and enhanced wear and abrasion resistance than TIVAR® 1000 PE-UHMW. The additives used also make this material static dissipative and considerably improves UV-resistance. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.
Show
36
of 1,838 results
Go to page
1
2
3
4
5
6
7
8
9
10