Products in Parts, Shapes & Films

Acetron® POM-H / Ertacetal® H is a homopolymer acetal grade that offers exceptional mechanical strength, stiffness, and hardness, making it the ideal choice for a wide range of demanding applications. Its superior creep resistance and low thermal expansion rate make it stand out from copolymer acetal grades, making it the go-to material for small diameter, thin-walled bushings, bearings, gears, electrical components, medical and diagnostic equipment, valves, and fluid handling components.Features:Superior mechanical strength, stiffness, and hardnessExceptional creep resistanceLow thermal expansion rateHigh wear resistanceBenefits:Durable and long-lasting performanceEasy installation and removal with minimal distortionHigh resistance to chemical wearHigh impact strength, even at low temperaturesExcellent dimensional stabilityApplications:Small diameter, thin-walled bushings and bearingsGearsElectrical componentsMedical and diagnostic equipmentValvesFluid handling components

Ertalon® 66 GF30 / Nylatron® GF30 is a 30% glass fiber-reinforced and heat-stabilized polyamide PA66. This material offers superior strength, stiffness, creep resistance, and dimensional stability, while also maintaining excellent wear resistance properties.Features:Increased strength and stiffnessExcellent creep resistanceDimensional stabilityGood fatigue resistanceHigh mechanical damping abilityGood sliding propertiesExcellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiationGood machinabilityBenefits:Can withstand high loads and temperaturesIdeal for sleeve and slide bearings, wear pads, rollers, pulleys, scrapers, gear wheels, sprockets, star wheels and insulatorsCan be used in various industries such as pharmaceutical, biotechnology, medical and processing markets.Applications:Sleeve and slide bearingsWear padsRollersPulleysScrapersGear wheelsSprocketsStar wheelsInsulators.

Ketron® HPV Polyetheretherketone PEEK shapes, a carbon fiber reinforced, graphite and PTFE lubricated material that offers the lowest coefficient of friction and the best machinability of all PEEK materials. This black-colored material is designed for applications where low wear and friction, and high pressure-velocity capabilities are needed. Features: Carbon fiber reinforced with graphite and PTFE lubricants Lowest coefficient of friction and best machinability of all PEEK materials Excellent tribological properties (low friction, long wear and high pressure-velocity capabilities) Benefits: Improves the performance of service bearings, bushings, insulators, valves, and seals with its combination of low wear and friction and high LPV Long wear and high pressure-velocity capabilities make it suitable for wear and friction applications The carbon fibers, PTFE and graphite lubrication results in a Ketron PEEK "Bearing Grade" Applications: Service bearings Bushings Insulators Valves Seals Wear and friction applications Ketron® HPV PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your service bearings, bushings, insulators, valves, and seals or need a material suitable for wear and friction applications, Ketron® HPV PEEK is the ideal solution.

Ketron® CM GF30 Polyetheretherketone PEEK, a compression-molded, 30% glass fiber reinforced grade that offers excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. This brownish-grey colored material is designed for applications where high strength, stiffness, and stability are needed in extreme environments. Features: 30% glass fiber reinforced for added strength and stiffness Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Low expansion rate and high flexural modulus Suitable for large structural applications that require superior strength, stiffness, and stability Benefits: Offers a higher stiffness and creep resistance than Ketron 1000 PEEK Has a much better dimensional stability Ideal for structural applications carrying high static loads for long periods of time at elevated temperatures Applications: Structural applications Aerospace industry Automotive industry Medical industry Industrial machinery Chemical processing Ketron® CM GF30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your structural applications in the aerospace, automotive, medical, industrial machinery or chemical processing industries, Ketron® CM GF30 PEEK is the ideal solution. However, it is important to note that the glass fibers tend to abrade the mating surface so the suitability for sliding parts should be carefully examined.

Ketron® CA30 Polyetheretherketone PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance that Ketron® GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications.

Proteus® LSG HP PP-H is a product available in the form of plates and rods and is well-suited for various applications. This material is known for its features, including low leachability, X-ray sterilizability, life science grade, gamma sterilizability, high purity, plasma gas sterilizability, chemical resistance, low moisture absorption, ethylene oxide sterilizability, biocompatibility, and low extractable. It comes in the colors off-white and natural and offers excellent resistance to chemical cleaning agents and zero moisture absorption. Its applications include equipment and parts in various industries.

Sultron® LSG FG R5100 PPSU is a product available in the form of plates and rods, and it possesses various important features. These include being ethylene oxide sterilizable, biocompatible, excellent sterilization resistance, X-ray sterilizable, alkali resistant, life science grade, gamma sterilizable, steam sterilizable, acid resistant, heat sterilizable, plasma gas sterilizable, excellent hydrolysis resistance, and high ductility. It comes in the color black and finds applications in equipment and parts, implants and prosthetics, medical devices and assemblies, surgical instruments, and trays, as well as connectors in the medical field.

Nylatron® MC 907 PA6 and Ertalon® 6PLA PA6 are unmodified cast nylon 6 grades that offer the highest strength and hardness of all nylon 6 grades. They exhibit great creep and wear resistance, heat aging properties, and machinability capabilities, making them ideal for the food processing and packaging industry.Features:High mechanical strength, stiffness, hardness, and toughnessGood fatigue resistanceHigh mechanical damping abilityGood sliding properties and excellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma- and X-rays)Good machinabilityBenefits:High strength and hardness for maximum durability and longevityExcellent creep and wear resistance for minimal maintenance and replacement costsHeat aging properties ensure long-term performance in high-temperature environmentsGood machinability for easy customization and shapingFDA and EU food contact compliant composition for safe and hygienic use in food processing and packaging applicationsApplications:GearsRollersWheelsBearingsConveyor wear partsAnd more in the food processing and packaging industry.

Nylatron® SA Flame Retardant (FR) Polyamide PA66 shapes were specifically developed to meet the requirements of the plastic flammability test, as outlined in UL 94 and EN 45545-2 regulations. This grade of Nylatron® is designed for applications within the transportation and railway markets, and is ideal for use in cable holders, clamps, channels, and connections/sockets.Features:Universally flame retardantFully compliant with REACHLow moisture absorptionAbsence of heavy metals and halogens – RoHS compliantBenefits:Meets V-0 criteria from a thickness of 1mmCompliant with the EN 45545-2 regulation, a standard specific to railway applicationsSuitable for use in transportation and railway marketsApplications:Cable holdersClampsChannelsConnections / socketsAdditional Note: Parts manufactured from Nylatron 66SA FR can be disposed according to WEEE.

Ertalyte® Sterra™ PET is an unreinforced, semi-crystalline grade that is produced from proprietary resin grades made by Mitsubishi Chemical Advanced Materials. Characterized by its excellent wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, this grade is capable of sustaining high loads and retains more of its original strength up to 180°F (85°C) than nylons or acetals. Due to these characteristics, Ertalyte® Sterra™ PET components are a favored solution for bearing and structural applications throughout the pharmaceutical, food processing and packaging, and oil and gas industries. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Sultron® LSG PSU offers a variety of features that make it a suitable material for medical devices and assemblies. It exhibits excellent sterilization resistance, X-ray sterilizability, life science grade, excellent transparency properties, gamma sterilizability, good mechanical properties, steam sterilizability, heat sterilizability, plasma gas sterilizability, excellent thermal properties, good electrical properties, ethylene oxide sterilizability, biocompatibility, and hydrolysis resistance. It is a product available in yellow and translucent colors and can be found in the physical forms of plates and rods.

Nylatron® LIG Polyamide PA6, a self-lubricating, oil-filled nylon that is the perfect solution for industrial applications in the conveying and processing industries. With its unique combination of features, this material offers a range of benefits for a variety of applications.Features:Self-lubricating, oil-filled nylonHigher toughness and limiting pressure velocity when compared to unfilled gradesLow coefficient of frictionBenefits:Enhances load bearing performance and reduces the coefficient of frictionProvides a solution for industrial applications in the conveying and processing industriesApplications:Ideal for use in bushings, bearings, roller wheels, and valve seats and sealsSuitable for use in a wide range of industrial applications where self-lubricating materials are required.

Semitron® ESd 410C PEI Polyetherimide electro static dissipative shapes are the perfect solution for semiconductor and electronics handling environments. These shapes offer exceptional dimensional stability and can withstand temperatures up to 410º F without degradation. The unique properties of Semitron® ESd 410C PEI make it ideal for a wide range of applications, including handling tray, circuit board, hard disk drive, and sensitive processing equipment applications.Features:Surface resistivity of 104 - 106 ohms/sq.Thermal performance to 210 °C (410 °F)Low stress for tight tolerance machiningHigh strength and stiffnessBenefits:Excellent dimensional stabilityResistant to high temperaturesLow stress for tighter tolerances during machiningReduced coefficient of linear thermal expansionMinimal water absorptionApplications:Handling Trays: Trays manufactured from Semitron® ESd 410C dissipate static charges reliably and are dimensionally stable. (Prior materials: PPS, PEEK, Vespel® PI)Circuit Boards: Semitron ESd 410C is ideal for use in circuit boards as it offers excellent dimensional stability and can withstand high temperatures without degradation.Hard Disk Drives: Semitron ESd 410C is an ideal material for use in hard disk drives due to its high strength, low stress properties and exceptional dimensional stability.Sensitive Processing Equipment: Semitron ESd 410C offers low stress properties, minimal water absorption and high strength making it an ideal choice for use in sensitive processing equipment.

Ertalon® LFX PA6 / Nylatron® LFX Polyamide PA6 internally lubricated shapes are specially formulated to withstand the demands of unlubricated, highly loaded, and slowly moving parts applications. This high-performance material offers a unique combination of mechanical properties, including high strength, stiffness, hardness, and toughness, as well as excellent sliding properties, high mechanical damping capabilities, and exceptional electrical insulation properties.Features:Internally lubricatedHigh mechanical strength, stiffness, hardness, and toughnessExcellent sliding propertiesHigh mechanical damping capabilitiesExceptional electrical insulating propertiesBenefits:Can withstand the demands of unlubricated, highly loaded, and slowly moving parts applicationsOffers a unique combination of mechanical propertiesProvides excellent performance in extreme conditionsMinimizes the need for external lubricationApplications:Pharmaceutical, biotechnology, medical, and processing marketsIdeal for use in unlubricated, highly loaded, and slowly moving parts applications such as gears, bearings, and bushingsCan be used in a wide range of industries where high performance, durability, and low maintenance are required.

Ketron® Sterra™ HPV PEEK shapes are carbon fiber reinforced with graphite and PTFE lubricants. This gives them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron® Sterra™ HPV PEEK’s combination of low wear, low friction, and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves, and seals. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Ertalyte® is a high-performance polyethylene terephthalate polyester (PET) produced by Mitsubishi Chemical Advanced Materials. With its exceptional wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, Ertalyte® is the ideal material for applications that require sustained high loads and high-temperature performance.Features:Excellent wear resistanceLow coefficient of frictionHigh strength and toughnessResistant to moderately acidic solutionsRetains more of its original strength up to 180° F / 85° C than nylons or acetalsBenefits:Capable of sustaining high loadsIdeal for applications requiring high-temperature performanceExtends the service life of componentsLow maintenance and repair costsSuitable for use in harsh environmentsApplications:PharmaceuticalFood processing and packagingOil and gasBearings and structural applicationsAny application requiring high load and high-temperature performance.

Nylatron® 101 Polyamide PA66 and Ertalon® 66 SA Polyamide PA66 - the ultimate solution for applications that require a combination of strength and toughness. These unmodified shapes are characterized by their superior mechanical strength, stiffness, and wear resistance, making them ideal for a wide range of industrial applications.Features:High mechanical strength, stiffness, and hardnessGood fatigue resistance, sliding properties and machinabilityHigh mechanical damping abilityExcellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma and X-rays)Benefits:With Nylatron® 101 PA66 and Ertalon® 66 SA PA66, you can be sure that your components will withstand even the most demanding of conditions.The superior strength and toughness of these materials ensures that they can handle heavy loads and high-stress applications with ease.The excellent wear resistance and sliding properties of these materials make them ideal for use in gears, bearings, bushings, and other moving parts.Their good electrical insulating properties and resistance to high energy radiation make them suitable for use in electrical equipment and machinery.Applications:Screw machined electrical insulatorsBushings, bearings, gears, roller wheels, star wheels, and sealsFood processing and packaging industry (FDA and EU food contact compliant composition)Suitable for machining on automatic lathes

Nylatron® GS PA66 is a premium grade of Polyamide PA66, reinforced with Molybdenum Disulphide (MoS2) to enhance its mechanical properties. This unique combination of materials offers outstanding strength, rigidity, and a lower coefficient of linear thermal expansion than other nylon products.Features:High mechanical strength, stiffness, hardness, and toughnessGood fatigue resistanceHigh mechanical damping abilityGood sliding propertiesExcellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma and X-rays)Good machinabilityBenefits:Maintains fits and clearances, reducing the likelihood of seizing as bearingsEnhanced bearing and wear properties due to MoS2Excellent performance in high-precision applicationsApplications:Ideal for use in bushings, bearings, roller wheels, pulleys, sheaves, wear pads, valve seats, and seals in construction and heavy equipment industries.Can also be used in other high wear and load-bearing applications.Nylatron® GS PA66 is a superior choice for applications that require high strength, rigidity and wear resistance, making it a perfect solution for construction and heavy equipment industries.

Ertacetal® H / Acetron® H Polyoxymethylene POM-H is a homopolymer acetal grade that offers exceptional mechanical strength, stiffness, hardness, and creep resistance, making it the perfect choice for a wide range of demanding applications.Features:Superior mechanical properties that allow the use of standard fastenersExcellent stability and machining properties that reduce machining costsDurable material that allows for easy installation and removal with minimal distortionHigh chemical resistance for a long service lifetimeHigh impact strength, even at low temperaturesExcellent dimensional stability with low water absorptionBenefits:Reduced machining costs and improved efficiency in manufacturingLong-lasting and durable components that can withstand demanding conditionsEasy installation and removal, even in tight spacesHigh chemical resistance ensures a long service lifetimeHigh impact strength, even at low temperatures, ensures reliable performance in any environmentExcellent dimensional stability ensures consistent and accurate resultsApplications:Small diameter, thin-walled bushings and bearingsGearsElectrical componentsMedical and diagnostic equipmentValvesFluid handling components

Duratron® D7015G PI Polyimide is a high-performance bearing grade material that offers exceptional temperature and wear resistance. With a low coefficient of friction, this material is ideal for use in applications where high loads and speeds are a critical factor.Features:15% graphite added for long wear and frictionSuperior temperature and wear resistanceLow coefficient of frictionMaintains performance abilities with or without lubricationBenefits:Excellent choice for bearing, bushing, and seal applications where higher loads or speeds are a significant factorProvides long-lasting performance in harsh environmentsLow maintenance and long-lasting partsApplications:Bearings and bushings in high-temperature environmentsSeals for high-speed or high-load applicationsMachine parts and components in harsh environments where temperature and wear resistance are needed.

Nylatron® LFX Polyamide PA6, a specially formulated internally lubricated material designed for unlubricated, highly loaded, and slowly moving parts applications. This advanced material offers a range of exceptional properties that make it a top choice for various industries, including pharmaceutical, biotechnology, medical, and processing.Features:Internally lubricated for unlubricated, highly loaded, and slowly moving parts applicationsHigh mechanical strength, stiffness, hardness, and toughnessGreat sliding propertiesHigh mechanical damping capabilitiesExceptional electrical insulating propertiesBenefits:Excellent wear resistance and easy machiningLow coefficient of frictionHigher values of PV (pressure / velocity)Good resistance to high energy radiations (Gamma and X Rays)High mechanical damping capacityGood sliding and thermal insulation propertiesApplications:Pharmaceutical, biotechnology, medical and processing industriesIdeal for use in gears, bearings, sprockets, and sheavesSuitable for use in various machinery and equipment

Fluorosint® HPV is an advanced polymer material that combines the excellent chemical resistance and low friction properties of PTFE (polytetrafluoroethylene) with added strength, stiffness, and wear resistance, making it ideal for high-performance bearing applications.Key features:High PV (pressure-velocity) and low “k” or wear factor: Optimized for high performance and durability in bearing applicationsFDA Compliant: Suitable for use in food processing and pharmaceutical applicationsHigh strength and stiffness: Can handle heavy loads and high speedsFDA Compliant : Suitable for applications where food contact compliance may be requiredBenefits:High performance and durability in bearing applications: Enables equipment to run efficiently and safelyFDA Compliance: Provides new design options for food processing and pharmaceutical applicationsHigh strength and stiffness: Can handle heavy loads and high speeds, making it ideal for demanding applicationsImproved reliability and safety in critical applications.Application:Bearing applications where high PV and low “k” or wear factor are neededFood processing and pharmaceutical applications where FDA compliance is requiredAny application that requires high performance and durability in harsh environmentsFluorosint® HPV is a versatile and reliable material that can help improve the performance and longevity of your products. It's FDA compliant, making it suitable for food processing and pharmaceutical applications, it's ideal for high-performance bearing applications and it's available in custom shapes for efficient production. With its excellent chemical resistance, low friction, and high performance in harsh environments, Fluorosint® HPV is an excellent choice for equipment manufacturers looking to improve the performance and safety of their products.

Nylatron® GSM Polyamide PA6, a unique material that combines the benefits of Molybdenum Disulphide (MoS2) with the impact resistance of cast nylon products. This material is specifically designed to enhance load-bearing capabilities while maintaining its strength and toughness.Features:Contains finely divided particles of Molybdenum Disulphide (MoS2)Enhances load-bearing capabilitiesMaintains impact resistance inherent to cast nylon productsPossesses an ideal combination of strength and toughnessExhibits excellent mechanical and electrical propertiesBenefits:Can withstand high pressure and heavy loadsResistant to impact and wearProvides stability and durability in various applicationsCan be used in high-precision and automated equipmentApplications:GearsBearingsSprocketsSheavesConstruction and heavy equipment marketsNylatron® GSM Polyamide PA6 is an ideal solution for industries that require materials with high load-bearing capabilities, excellent impact resistance, and strong mechanical and electrical properties.

Techtron® PSBG is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added strength and durability of carbon fiber reinforcement. This compression-molded material is internally lubricated and designed to excel in wear applications where an electrically conductive material is required.Key features:Excellent wear resistance: internally lubricated and carbon fiber-reinforced, allowing it to withstand high loads and minimize wear and tearOutstanding dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerancesExtreme chemical and corrosion resistance: ideal for use in demanding environmentsLow coefficient of linear thermal expansion: making it suitable for applications where dimensional stability is criticalElectrically conductive: ideal for wear applications that require electrical conductivityBenefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion and wearEnhanced precision and dimensional stabilityImproved electrical conductivityApplications:Bushings and bearings, lantern rings, and pump wear components in the oil and gas industryElectrical components as it is electrically conductiveAutomotive and aerospace components as it can withstand high temperatures.Wear-resistant components in general, as it is internally lubricated and reinforced with carbon fiberTechtron® PSBG is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, making it easy to incorporate into your designs.

Nylatron® NSM Polyamide PA66 is a high-performance thermoplastic that is designed to provide exceptional wear resistance and long-term durability in a wide range of industrial applications. This solid lubricant-filled, proprietary cast nylon formulation offers superior self-lubricating properties, outstanding friction behavior, maximum wear resistance, and excellent dynamic load-bearing capacities that are up to five times higher than conventional cast nylon grades.Features:The most wear-resistant thermoplastic availableSelf-lubricating with outstanding friction behaviorDynamic load-bearing capacity up to 5x higher than standard cast nylonsService life up to 10x longer than standard cast nylonsBenefits:Provides exceptional wear resistance and long-term durabilityIdeal for high-velocity applications requiring larger geometriesSuitable for a wide range of industrial applicationsApplications:BearingsGearsWear padsPulleysSheavesBushingsValve seatsSealsNylatron® NSM Polyamide PA66 is an ideal solution for industrial applications in the conveying and processing industries and other applications that require a high-performance thermoplastic material with superior wear resistance. This grade is often used as a solution for bearings, gears, wear pads, pulleys, sheaves, bushings, valve seats, and seals, and has the ability to last up to 10 times longer than standard nylon grades, making it a perfect choice for high-velocity, unlubricated moving parts requiring larger geometries.

Altron™ 1000 PC machine grade polycarbonate is a transparent, amorphous thermoplastic that offers exceptional impact strength and elasticity, minimal moisture absorption, and outstanding resistance to acidic solutions. This grade is produced from select batches of non-UV stabilized polycarbonate resin that complies with EU and FDA regulations for plastics intended to come into contact with food products.Features:Transparent, amorphous thermoplasticSuperior impact strengthSuperior flexural modulus of elasticityMinimal moisture absorptionOutstanding resistance to acidsGreat electrical characteristicsBenefits:Durable and able to withstand high impactsResistant to deformation under loadLow moisture absorption means no swelling or warpingResistant to acidic solutions, making it suitable for a variety of applicationsExcellent electrical characteristics, making it suitable for semiconductor and electronics applicationsApplications:Semiconductor and electronics applicationsTransparent structural applicationsFood contact applications that comply with EU and FDA regulations

Semitron® MDS 100 modified Polyetheretherketone PEEK shapes offer a remarkable combination of strength, stiffness, and stability. This grade in particular was developed for use in uncontrolled application environments where a high level of precision is required. Due to this, Semitron® MDS 100 components are often used as test sockets, nests, and fixtures in test and package equipment throughout the semiconductor and electronics industry.Features:Remarkable combination of strength, stiffness, and stabilityDeveloped for use in uncontrolled application environments where a high level of precision is requiredMoisture absorption of 0.10% at 24 hrs. (per ASTM D570)Thermal performance to 210 °C (410 °F)Flexural modulus > 1,400,000 psiBenefits:Ideal for test sockets, nests and fixtures in test and package equipmentSuitable for use in semiconductor and electronics industryCan withstand harsh, uncontrolled environmentsLow moisture absorption ensures dimensional stabilityHigh thermal performance and flexural modulus ensures durability and precisionApplications:Test sockets, nests and fixtures in test and package equipmentOther applications in the semiconductor and electronics industry that require a high level of precision and stability in uncontrolled environments.

Ketron® 1000 PEEK is a high-performance polymer that offers excellent mechanical properties and chemical resistance. It is widely used in a variety of applications where high strength and stiffness, low friction, and excellent dimensional stability are required. This material is ideal for instrument and seal components, where its high elongation and toughness make it an excellent choice. Its non-toxic and biocompatible properties make it suitable for use in medical and food processing applications.   Key features: High strength and stiffness Low friction Excellent dimensional stability High elongation and toughness EU 10/2011 and FDA compliant   Benefits: Improved performance and durability of components Increased resistance to chemicals and high temperatures Enhanced biocompatibility and safety in medical and food processing applications Greater design flexibility and compatibility with a wide range of applications and industries   Application: Structural parts: Ketron® PEEK is often used for structural components that are subject to high temperatures and chemical exposure. For example, it is commonly used for vacuum wand handles in semiconductor manufacturing. Bushings, bearings, seals, and back-up rings: Ketron® PEEK is an excellent choice for components that are subject to wear and tear. Its low coefficient of friction and high strength make it suitable for use in a wide range of applications, from aircraft to oil field drilling.   Ketron® 1000 PEEK is available in a range of shapes and sizes, making it easy to incorporate into your designs. It is a versatile and reliable material that can help improve the performance and longevity of your products.

Duratron® D7000 PI Polyimide shapes - a high-performance material ideal for demanding applications that require exceptional thermal resistance, low wear and friction, strength, and impact resistance. With superior electrical and thermal insulation properties, outstanding mechanical performance, great chemical resistance, and outstanding dimensional stability, Duratron® D7000 PI is an ideal solution for designs that reduce weight, extend service life, and reduce overall costs.Features:Superior electrical and thermal insulation propertiesOutstanding mechanical performanceGreat chemical resistanceHigh strength and toughnessOutstanding dimensional stabilityBenefits:Ideal for designs that reduce weightExtends service life before maintenance or replacementReduces overall costs by increasing process uptimeApplications:AerospaceTransportationIndustrialDuratron® D7000 PI is available in stock shapes and direct formed parts, perfect for smaller series and designs where tolerances and geometry of the end part require machining. The material is also available in Hot Compression Molded (HCM) shapes, providing designers with the greatest economy and flexibility.

Ketron® 1000 Injection Molded (IM) Polyetheretherketone PEEK shapes are the perfect solution for applications that require excellent chemical, corrosion and wear resistance across a wide range of operating temperatures. These advanced engineering plastics are ideal for use in the oil and gas industry, where they are often specified for back-up seal rings and v-seals.   Key features: Very high maximum allowable service temperature in air (250 °C continuously, up to 310 °C for short periods of time) High mechanical strength, stiffness and creep resistance, even at elevated temperatures Excellent chemical and hydrolysis resistance Excellent wear and frictional behavior Very good dimensional stability Excellent resistance to high energy radiation (gamma- and X-rays) Inherent low flammability and very low levels of smoke evolution during combustion   Benefits: Can withstand harsh environments and high temperatures Exceptional toughness and impact strength Sterilizable by all conventional sterilization methods Complies with EU and US regulations for food contact Available in "Food Grade" natural and black color options   Applications: Back-up seal rings and v-seals in the oil and gas industry Bearings, bushings and gears in food processing equipment High temperature seals, gaskets and washers in chemical processing equipment Medical device components and implants Aerospace and automotive components

Acetron® C Sterra™ POM-C is a general-purpose copolymer acetal grade that is often favored for its porosity-free nature. Acetron® C Sterra™ POM-C shapes offer low moisture and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Ertalon® 6 XAU+ Polyamide PA6 is a polyamide PA6 material that is heat-stabilized and boasts a dense and highly crystalline structure. This material offers superior heat aging performance in air, making it a reliable choice for bearings and other mechanical parts that are subject to wear and that operate at high temperatures for extended periods of time.Features:Heat-stabilizedHighly dense, crystalline structureSuperior heat aging performance in airBenefits:Reliable wear resistance and performance at service temperatures over 60°C (140°F)Ideal for use in bearings and other mechanical parts that are subject to wear and that operate at high temperatures for extended periods of timeApplications:Bearings and other mechanical parts in high temperature environmentsIndustrial machinery and equipmentAutomotive and transportation industriesOther applications where heat and wear resistance are critical factors.

Semitron® ESd 480 Polyetheretherketone PEEK electro static dissipative shapes are a top choice for critical test fixture and wafer handling applications in wet process tools, where static dissipation is critical. These shapes are specifically designed to provide excellent chemical resistance properties and high dimensional stability under varying environmental conditions.Features:Excellent chemical resistance propertiesHigh dimensional stability under varying environmental conditionsSurface resistivity: 106 - 109 ohms/sqBenefits:Ideal for critical test fixture and wafer handling applications in wet process toolsProvides a dissipative range of 106 - 109 ohms/sq, ensuring static dissipation is criticalDimensionally stable, making it ideal for critical test fixture applicationsApplications:Test fixture and wafer handling applications in wet process toolsStructural applications in wet process tools where static dissipation is importantWell-suited for use in wafer handling and other structural applications in wet process tools where static dissipation is important.

Nylatron® GS PA66 is a premium grade of Polyamide PA66, reinforced with Molybdenum Disulphide (MoS2) to enhance its mechanical properties. This unique combination of materials offers outstanding strength, rigidity, and a lower coefficient of linear thermal expansion than other nylon products.Features:High mechanical strength, stiffness, hardness, and toughnessGood fatigue resistanceHigh mechanical damping abilityGood sliding propertiesExcellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma and X-rays)Good machinabilityBenefits:Maintains fits and clearances, reducing the likelihood of seizing as bearingsEnhanced bearing and wear properties due to MoS2Excellent performance in high-precision applicationsApplications:Ideal for use in bushings, bearings, roller wheels, pulleys, sheaves, wear pads, valve seats, and seals in construction and heavy equipment industries.Can also be used in other high wear and load-bearing applications.Nylatron® GS PA66 is a superior choice for applications that require high strength, rigidity and wear resistance, making it a perfect solution for construction and heavy equipment industries.

Nylatron® FST Polyamide PA66 is a fire, smoke, and toxicity retardant engineering plastic that is designed to withstand extreme temperatures up to 347° F / 175° C. This grade is JAR / FAR 25.853 compliant, making it the first engineering plastic to achieve this standard. It is specifically developed for aircraft interior environments and is often used as a replacement for metal parts in various applications such as brackets, seal bushings, slide rails, and duct seals.Features:Fire, smoke, and toxicity retardantWithstands temperatures up to 347° F / 175° CJAR / FAR 25.853 compliantBenefits:Provides superior fire safety for aircraft interior environmentsCan withstand extreme temperatures, making it suitable for high-temperature applicationsMeets industry standards for fire and smoke safety, making it a reliable and safe choice for various applicationsApplications:Aircraft interior environmentsBracketsSeal bushingsSlide railsDuct sealsOther high-temperature and fire safety applications.

Duratron® T4501 PAI Polyamide-imide is a high-performance plastic known for its exceptional compressive strength and excellent wear resistance. This grade is ideal for general purpose wear and friction applications, and is able to endure harsh thermal, chemical, and stress conditions.Features:High compressive strengthExcellent wear resistanceAble to endure harsh thermal, chemical, and stress conditionsSimilar in composition to Duratron® T4301 PAIAvailable in larger shapes or componentsBenefits:Can carry more loadReliable solution for general purpose wear and friction applicationsSuitable for a wide range of applications that require high strength and durabilityApplications:General purpose wear and friction partsLarge shapes and componentsApplications that require high strength and durability such as industrial machinery, automotive and aerospace.