Products in Thermoset Resins

Leecast 16-46 A is a two-part epoxy compound designed for the encapsulation of electrical and electronic components. The advantages of LEECAST 16-46 include flame retardancy, good thermal shock resistance, good electrical properties, non-abrasive filler, easy 1 to 1 mix ratio and room temperature cure.

PEXIDAN® HF X/T is a unique low smoke halogen free flame retardant 90°C wet-rated XL-insulation system curable by moisture. It consists of a silane pre-grafted base compound SX651 and a catalyst masterbatch CM540U. Mixed and extruded in the proper proportions (95:5), the two components result in a material that is crosslinkable by exposure to 90°C hot water. PEXIDAN® HF X/T is REACH and RoHS-compliant and is UL 2885 certified to bear the Halogen Free “HF” designation. PEXIDAN® HF X/T is UL-bulletinized and wire made with this insulation system may be marked as Oil Resistant “PR I” and “PR II”, Gas & Oil Resistant “GR I” and “GR II”, “-40C” and “SUNRES” in all colors. This compound will meet a 105°C dry rating.

ADEKA™ EP-4000S, identified by the polymer name epoxy resins and compounds, is characterized by its low viscosity. Designed for plastics and elastomers processing methods, particularly casting, ADEKA™ EP-4000S ensures ease of application and efficient material flow in various industrial processes.

ADEKA™ EP-4088L, a specialized epoxy resin and compound polymer, boasts high purity, making it an exceptional choice for diverse applications. Tailored for plastics processing methods, particularly casting, ADEKA™ EP-4088L ensures optimal material performance in various settings. Leveraging advanced plastic technologies, this polymer stands out for its purity, addressing the stringent requirements of industries where high-quality materials are paramount. As a reliable solution for casting processes, ADEKA™ EP-4088L caters to the specific needs of industries demanding precision and purity in their applications.

ADEKA™ EP-4080E, a distinguished epoxy resins and compounds variant, is tailored for specific plastics and elastomer processing methods, especially casting. With a prime focus on applications in the electrical and electronic domains, ADEKA™ EP-4080E ensures optimal material performance in these specialized settings. As a reliable choice for casting processes, this polymer addresses the unique requirements of electrical and electronic applications, making it an ideal solution for industries demanding precision and reliability.

PEXIDAN® HF SX545 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U in the ratio 95:5. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX545 has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1 and EN 50525-3-41.

ADEKA™ ED-523T, distinguished by the polymer name epoxy resins and compounds, is a specialized resin designed for plastics and elastomer functions. With a foundation in advanced plastic technologies, it stands as a vital component in formulations within the plastics industry, embodying a commitment to excellence in resin applications.

PEXIDAN® HF SX650 pre-grafted base is mixed with catalyst masterbatch CM603 or CM601, in an addition rate between 3% and 5%, depending on extrusion conditions. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX650 system has been developed to meet specification requirements TUV 2Pfg1169:2007, EN 50618:2014 and IEC 62930.

ADEKA™ EPR-1415-1, a cutting-edge epoxy resin and compound polymer, showcases its prowess in the plastics technology field. Boasting exceptional characteristics such as good adhesion and impact resistance, this product ensures not only reliability but also durability in a myriad of applications. Experience the next level of performance and versatility with ADEKA™ EPR-1415-1.

ADEKA™ EP-4100E, an epoxy resins and compounds variant, is tailored for plastics and elastomers processing through casting techniques. ADEKA™ EP-4100E is primarily intended for end uses in electrical and electronic applications and laminates. This specialized polymer ensures optimal performance in these specific industrial applications.

ADEKA™ ED-503 is distinguished by the polymer name epoxy resins and compounds, is a resin designed for plastics and elastomer functions. Rooted in advanced plastic technologies, it aligns with the evolving needs of the industry, contributing as a crucial component in formulations within the realm of plastics.

PEXIDAN® SX408 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM401 in the ratio 95:5. If high thermal aging is required, than CM493 should be used instead. Crosslinking is obtained by exposure to moist or hot water immersion only.

Durez™ 00153 by Sumitomo Bakelite Company is comprised of Phenolic Compound. It is commonly used Durez™ 00153 is certified as UL Flame Rated. It is available in Granules form.

MU-209A Its functions are flexible, low stress, stress release, and shock absorption.

A black epoxy system with a convenient 1:1 mix ratio by volume. This product has excellent machinability, good impact strength, and cures overnight at room temperature. It has very low shrinkage making it ideal for prototypes, models, dies, and cast production parts.

TUFFALLOY 4270 is a series of Liquid Molding Compounds with thermoplastic properties such as high impact, high heat distortion, and low viscosity. This unique chemistry developed by Hapco to meet today's market demands for prototype and low production parts needs.THE TUFFALLOY 4270 Series are available in (4) speeds.The user has the ability to use different speeds of TUFFALLOY 4270, typically using a slower speed initially and increasing to a fast set, 1 minute working life.PROCESSING: TUFFALLOY 4270 Series can be pressure cast, vacuum cast, or open cast. For best results, TUFFALLOY 4274/75 should be used with Hapco's metering/dispensing equipment, RAPIDFIL, MINI FIL, and RAPIDSHOT.

BCC Kwik Kast/Gray is a two component, fast setting polyurethane reproduction plastic. BC 8645 sets to a demoldable hardness within 30 minutes @ 77°F. Uses include; tracing models, core boxes, duplicating aids, patterns, prototypes, low temperature vacuum form tools, etc..

BCC Products now offers a revolutionary state-of-the-art machineable high density board for today's demanding tooling requirements. MB 5000 is an extremely tough, high impact Urethane Plank that can be used for metal forming as well as nickel plating mandrels.

Resin-SA Pty Ltd RES IS006- UTA is a isopthalic resin which is used for spray up /hand laminating.

Ares P807 is resin for reinforcing bathtubs and shower trays, excellent adhesion to ABS, good loadability and compatibility with glass fibers. Excellent dimensional stability. Also ideal for spray up processing. Low emission version (LSE) available.

Isoplas P651 is used for rigid pipes for water transport, and for general purpose use.

RALUPOL® UP 804 molding compounds are characterized by excellent dimensional stability with very low processing and post-shrinkage. Due to their high rigidity and excellent heat resistance, RALUPOL® products withstand short-term heat loads. They have excellent electrical insulation and dielectric properties, which are retained even with long-term use at high temperatures. The reason for this is high tracking resistance (CTI> 600 V), arc resistance, glow wire test (GWFI 960 ° C) and a high electrical RTI (relative temperature index) of 170 ° C according to UL 746 (IEC 60216 / T1).

Arlon 44N is a high resin content multifunctional (175°C) epoxy prepreg system with a proprietary micordisperse ceramic filler system. 44N is engineered for the filling of clearance holes in thin Metal cores such as 0.006" Copperinvar- Copper or via holes in sequentially laminated MLB designs. Based on Arlon's 45N, the 44N system is compatible with conventional epoxy lamination and fabrication.

A white epoxy system with a convenient 1:1 mix ratio by weight and volume. This product has excellent machinability, good impact strength, and cures overnight at room temperature. It has very low shrinkage making it ideal for prototypes, models, dies, and cast production parts.

MELOPAS® MP 181 is a Cellulose-reinforced molding compounds based on melamine resin & melamine

Resiten® G10FR4 laminates are extremely durable, lightweight, and moisture resistant. they are available in sheet, strip, block, and fabricated parts.Applications are Military Service and Industrial Applications.

CLR1331 is a low stress, extremely tough casting compound which was developed for casting low voltage bushings and insulators.

TC-1614 A/B is an unfilled, low viscosity epoxy resin system.It is designed to seal porous to semi-porous substrates developing remarkable strength.TC-1614 A/B also has exceptional adhesive characteristics and is capable of high temperatures.

MU-231B its Functions Low Stress, High Thermal Conductivity, Stress Release, Shock Absorption.

The Melochem 736 Dry Granulated Molding Compound are based on melamine-formaldehyde resins fortified with high-class cellulose as reinforcement and further modified with minor amounts of special purpose additives, pigments, cure regulators and lubricants. Our Melochem 736 grade is a general-purpose injection grade. Chemical components are chosen with the purpose of minimizing the potential risks to working environment and nature. The Melochem 736 Molding Compounds can be supplied in most colors from translucent pastels to black. Molded parts are free from odor, light stable and have good moisture resistance and water absorption and are therefore dishwasher safe. Excellent surface hardness and glossy surface is combined with excellent chemical resistance. Fats, oils and common organic solvents like alcohol and acetone do not attack the materials and they are also resistant to surfactants and weak bases. They will withstand attack from weak acids fro a shorter duration. Oxygen index is 40% and is achieved without the use of external flame-retardants. No halogens are present in the composition.

Polipol 351 is a Hand lay-up / Spray-up high reactivity polyster.

3H Vinacom XLPE compound 3H VINACOM HA-5010 is a silane cross-linkable polyethylene compound for low voltage electrical wire and cable insulation. Both the grafting and wire coating process are performed in one single step in the usual wire and cable production extruder for polyethylene and cross-linking takes place through a reaction involving water vapor after being extruded. Difficulty in maintaining dimensional accuracy during cross-linking is avoided because the temperature of cross-linking is below the crystalline melting point of the polymer. Therefore, 3H VINACOM XLPE HA-5010 allow cross-linked polyethylene wire and cable without the need for much capital in special equipment like peroxide or radiation cross-linking.

MU-107A It has the following properties: flexibility, low stress, moisture resistance, stress release, and shock absorption.

Proxima® HPR 2128 is uniquely formulated to provide high temperature performance. Proxima® HPR 2128 shows higher stiffness (or modulus) and higher glass transition temperature compared to other resins in the Proxima® HPR 2100 series.

Polipol 383-G is an isophthalic/NPG based, acrylic modified, medium reactivity and viscosity, solid surface type unsaturated polyester resin with solid surface filling. It is suitable for the production of solid surface products with its excellent UV resistance, high strength and esthetic properties. The main areas of use are the production of hygienic materials such as kitchen / fast food counters and sinks suitable for food contact. Inner It is used in architecture and decoration, wherever a natural granite look is desired.

Shanghai Sanzheng Polymer Material Low Shrinkage Silane Cross-Linkable PE Compound 4244-E is suitable for 1kv and below low voltage cable, it is composed by 95% silane crosslinkable low density polyethylene (compound A) and 5% catalyst (compound B). The main raw materials of the product are imported high-quality LDPE and silane crosslink agent.