Products in Thermoset Resins

ADEKA™ EPR-1415-1, a cutting-edge epoxy resin and compound polymer, showcases its prowess in the plastics technology field. Boasting exceptional characteristics such as good adhesion and impact resistance, this product ensures not only reliability but also durability in a myriad of applications. Experience the next level of performance and versatility with ADEKA™ EPR-1415-1.

Leecast 16-46 A is a two-part epoxy compound designed for the encapsulation of electrical and electronic components. The advantages of LEECAST 16-46 include flame retardancy, good thermal shock resistance, good electrical properties, non-abrasive filler, easy 1 to 1 mix ratio and room temperature cure.

PEXIDAN® HF SX650 pre-grafted base is mixed with catalyst masterbatch CM603 or CM601, in an addition rate between 3% and 5%, depending on extrusion conditions. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX650 system has been developed to meet specification requirements TUV 2Pfg1169:2007, EN 50618:2014 and IEC 62930.

RS-2277 is a patented, castable, lead free insulating grade filled epoxy resin specifically designed for high voltage insulator applications requiring X-Ray shielding. This material provides good electrical grade insulation properties, high mechanical properties, and superior arc resistance to any lead oxide filled epoxy. This material has equal x-ray shielding to a 25% lead oxide filled epoxy. This material is non-flammable and meets UL94V-0 requirements.

PEXIDAN® HF SX559 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U in a ratio of 97:3 to 95:5. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX559 has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1, EN 50525-3-41 or other insulation or sheathing applications where high fire retardancy is required. Good CPR performance.

ADEKA™ ED-506, distinguished by the polymer name epoxy resins and compounds, holds a key position as a specialized resin in the domain of plastics and elastomer functions. With a commitment to advanced plastic technologies, this product seamlessly integrates into formulations, ensuring a versatile and high-performance contribution to the ever-evolving landscape of the plastics industry. ADEKA™ ED-506 embodies excellence, reflecting a dedication to meeting the diverse demands within the realm of plastics and elastomer applications.

ADEKA™ EP-5100R, an epoxy resin and compound polymer, is at the forefront of plastics technology. Specifically designed for casting methods, it ensures optimal performance in various industrial applications. ADEKA™ EP-5100R stands as a testament to reliability in precision casting processes.

PEXIDAN® SX408 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM401 in the ratio 95:5. If high thermal aging is required, than CM493 should be used instead. Crosslinking is obtained by exposure to moist or hot water immersion only.

ADEKA™ ED-503 is distinguished by the polymer name epoxy resins and compounds, is a resin designed for plastics and elastomer functions. Rooted in advanced plastic technologies, it aligns with the evolving needs of the industry, contributing as a crucial component in formulations within the realm of plastics.

ADEKA™ EP-49-10N, an epoxy resins and compounds polymer aligned with advanced plastic technologies, excels in plastics processing methods, especially casting. Noteworthy for its corrosion-resistant properties and excellent adhesion, ADEKA™ EP-49-10N is a top-tier choice for applications demanding superior performance and durability.

Surkopak® 2135 is a plasticising polyurethane resin intended for nitrocellulose based inks and coating systems. An extensive range of aromatic polyether based Surkopak® products is available in a choice of hardness and plasticising effects, which can be applied to both rigid and flexible substrates.

MELOPAS® MP 181 is a Cellulose-reinforced molding compounds based on melamine resin & melamine

Ebalta ebatemp is a high-quality two-component Polyurethane casting resin, which is very suitable for the production of vacuum thermoformed moldings. The fast casting resin, which is filled with very fine aluminum powder is very well castable and after curing very well polishable and workable. With ebatemp vacuum thermoformed moldings can be produced within 1-2 hours, these moldings show a temperature capacity of 80-90°C . Post-curing is not necessary. Material should be carefully stirred up/ shacked before use.

HK Research R0059 is a resilient, light stabilized void free polyester casting resin.

CLR1331 is a low stress, extremely tough casting compound which was developed for casting low voltage bushings and insulators.

TC-1614 A/B is an unfilled, low viscosity epoxy resin system.It is designed to seal porous to semi-porous substrates developing remarkable strength.TC-1614 A/B also has exceptional adhesive characteristics and is capable of high temperatures.

TC-1651 A/B is an aluminum powder filled epoxy casting resin system that provides service temperatures in the range of 340F (171C). TC-1651 is most commonly used for the construction of molds that require good heat conductivity, outstanding durability, and that provides production run capability.

Brandonite® 1011-85D contains features such as outstanding rigidity & flame Retardancy.

Resiten® G10FR4 laminates are extremely durable, lightweight, and moisture resistant. they are available in sheet, strip, block, and fabricated parts.Applications are Military Service and Industrial Applications.

A white epoxy system with a convenient 1:1 mix ratio by weight and volume. This product has excellent machinability, good impact strength, and cures overnight at room temperature. It has very low shrinkage making it ideal for prototypes, models, dies, and cast production parts.

BC 7009-2 is an iron filled, low-cost mass casting system. Recommended for use in casting a minimum of two inches and a maximum of six inches in non-conductive molds. Thicknesses to nine inches in metal or conductive-type molds can be successfully achieved as well. Ideal for stretch forms, patterns, dies, molds, duplications, prototypes, etc.

SWANCOR 2594 is a hot-melt epoxy resin and does not contain Diuron and volatile ingredients in the formula. Suitable for the rolling process, has good surface adhesion and spreadability, and is suitable for prepregs with low weight and low resin content.

Texalan® 365A product has excellent wear resistance, oil/solvent resistance, low temperature flexural resistance, high resilience, and bending resistance foldability.

BCC Slo-Kast is a low viscosity, medium setting, easy to use casting material. This polyurethane system features extremely low shrinkage when properly cured. Unlike Kwik-Kast, BC 8009 offers the user longer working time (15 minutes for filling closed mold cavities and up to 25 minutes when casting into open molds). Slo-Kast is ideal for casting large sections without having to stage pour. Uses included; tracing models, core boxes, keller aids, patterns, core sticks, vacuum form tools, prototypes and display parts.Handling Properties:BCC's Slo-Kast is a moderately fast-setting, two part casting system (Part A & Part B). If settling from long storage has occurred, re-mix contents of each container on a mechanical paint shaker, jiffy mixer, or other suitable mixing equipment. Precaution should be taken to prevent any moisture contamination. Use dry equipment and containers and keep covered when not in use. It is recommended that the work area be well ventilated and normal cleanliness and safety rules be observed. Avoid prolonged exposure to vapors and contact with skin.Preparation of Mold Surface:Clean the surface from dust and possible presence of moisture. Apply BC 87 Parting Agent and polish to a uniform high gloss finish (usually 2-3 coats are recommended). For plaster or wood surfaces seal with PVC sealer to ensure complete absence of moisture followed by 2-3 coats of 87 Parting Agent.Mixing and Pouring:Pour weighed or measured amounts of Part A & B into a separate dry container by pouring Part A into Part B. Mix with a spatula or mechanical stirrer for 1 minute for quart size batches or 2 minutes for gallon batches. After mixing both parts allow container to sit undisturbed 3-4 minutes before pouring. This "induction time" will result in superior surface qualities of the cast piece. Pour mixed resin uninterrupted from a convenient height above the mold cavity to resist air bubble entrapment. Clean your mixing tools by rinsing in an alcohol type solvent. Larger masses (2 feet or more) may be built up with successive pours. Castings may be demolded in as little as 3.5-4 hours, but should be properly supported while "green". If partially cured casting is disturbed, a surface film may result. This is easily removed by wiping with mineral spirits or lacquer thinner. Under normal conditions, maximum hardness or cure will be achieved in 24-48 hours.

Ebalta IH 16 / hardener fast is a very thin liquid two component epoxy resin with high strength values and high mold resistance. Due to its good soaking and wet-out characteristics the resin/hardener mixture is suitable as infilitration resin for porouse printed parts.

RIGIDDI-PAK R-4528 SeriesA black, flame retardant, thermally conductive, high performance series that can be used in all types of electrical components. Combined with its ability to dissipate heat, DI-PAK R-4528 also provides low linear thermal expansion, low shrinkage, and low exothermic heat while curing. Meets UL requirements.

Urochem 162 Molding Compounds can be supplied in an almost unlimited range of colors from translucent light pastels to black. Hard, glossy and scratch resistant surface. Excellent chemical resistance. Fats, oils and common organic solvents like alcohol and acetone do not attack molded parts which are also resistant to surfactants and weak bases. They will withstand attack from weak acids for a shorter duration. Excellent electrical properties (arc quenching, tracking, flame resistance). Oxygen index of 30% is achieved without the use of external flame retardants. No halogens are present in the composition.

MELOPAS® MF 2500 is a Cellulose-reinforced molding compounds based on melamine resin & melamine

SWANCOR 2551 is a hot-melt epoxy resin that can be cured at low temperature. The formula does not contain Diuron and volatile ingredients. It has the characteristics of light weight, excellent mechanical strength, heat resistance and corrosion resistance.

RIGIDDI-PAK R-4806 & R-4807 A/BLow viscosity, fast cure, high performance, potting and encapsulating compounds with excellent properties and FAST TURNOVER. Both are two part systems with 1:1 mix ratios by volume.

BC 4570 is a mulit-purpose paste designed for making quick repairs to a variety of substrates where service temperature exceeds 200°F (93°C). It is easy to mix and apply, cures in 15-20 minutes and can be readily shaped by filing, grinding, or machining thereafter. BC 4570 exhibits good adhesion to SMC, FRP, epoxy hi-heat molds, cast iron, aluminum, steel and many other surfaces. Featuring: heat resistance up to 425°F, excellent repair for aircraft/aerospace use, honeycomb core and foam core composite sealant, and repairs to SMC and FRP parts.

MB 2000 is a simulated wood-like product (free of grain) that is dimensionally stable and exhibits unsurpassed woodworking properties. Unlike other model board stock, MB 1000 is offered in both Pine and Mahogany colors. A standard carton of MB 2000 contains three 60 inch x 16 inch x 2 inch boards which yields approximately 40 board feet. A single board carton is also available and may be shipped standard Parcel Post if desired. For convenience, MB 2000 is shipped pre-planed (top and bottom surfaces) for preparation in gluing assembled pieces.

The HFFR-XL compound product range is a group of thermosetting, halogen-free flame retardant, low-smoke and non-toxic compounds based on polyolefins and mineral fillers, which can be crosslinked using heat or moisture. A catalyst masterbatch is added during the final extrusion together with the main compound (SIOPLAS method). These products are suitable for producing cross-linked insulation or sheathing.

CONLink® I 4900 is for high-performance wire & cable applications, where higher temperature, abrasion & chemical resistance are required, the compound must be crosslinked. Condor Compounds offers a broad range of cross-linkable compounds for the wire and cable industry according to various specifications.

BC 5008-2 is a very low viscosity, modified, unfilled, room temperature curing, general purpose resin system. Also considered an excellent general purpose adhesive for in-shop use and will function as a laminating system for horizontal surfaces.

MELOPAS® MF 3025 is a Cellulose-reinforced molding compounds based on melamine resin & melamine