Products in Paints & Coatings

Circa 1850® DEX Clear Wood Preservative is a paintable wood preservative that provides a clear finish. It is developed exclusively for exterior, above ground use. It provides paintable protection against rot and mildew and is designed for projects where no color change is desired. It is ideal for the protection of decks, fences, doors, sashes, window frames, outdoor furniture and millwork.

Circa 1850® Stain'n Varnish is both a wood stain and a varnish finish in one. Its unique gel formulation maintains a consistent blend of stain and varnish throughout the can, so there's no mixing or stirring required. As a result, you ensure uniformity from the beginning of your project to the end. And because it's a gel, it goes on without runs, drips or brush marks. Stain'n Varnish can be used on virtually any surface including wood furniture, molding, paneling and floors, pottery, metal, plastic, fiberglass, masonite and composites (or composite doors). Stain'n Varnish comes in 22 pre-mixed colors (and about a million custom-tinted colors) to suit any decor.

Circa 1850® AQUA Water-Based Varnish is a clear, tough coating that protects and beautifies wood. Its low odor and non-yellowing formula makes it an ideal finish for all interior wood surfaces. Circa 1850® Aqua Water-Based Varnish can be recoated in as little as 2 hours. It brings out the natural warmth of the wood and is formulated to clean up easily with water. Its micro-formulation permits clog-free spray application. Available in GLOSS, SEMI-GLOSS and SATIN.

RAMPAGE X™ is a Environmentally safe Hard-Shell, Water Base Form Release Agent designed specifically for Precast & Forms. Product quantity sold in 5 Gallons, 15 Gallons, 30 Gallons, 55 Gallons, 275 Gallons.

Circa 1850® Marine Grade Antique Paste Varnish is a gelled modified polyurethane varnish. It creates a rich patina and provides a true hand-rubbed finish that protects against heat, water and alcohol. Circa 1850® Marine Grade Antique Paste Varnish dries quickly - free from dust specks and brush marks. It is ideal for woodwork, cabinets, and all wood furniture. Circa 1850® Marine Grade Antique Paste Varnish contains transparent absorbers to screen out UV rays and inhibit the graying and fading effects of the sun, and incorporates a superior fungicide and mildewcide to increase performance.

Circa 1850® Fast Dry Polyurethane is a clear, tough coating that protects and beautifies wood. It can be recoated in as little as 3 hours and cures to an exceptionally hard finish - similar to those used in bowling alleys. Its micro-formulation permits clog-free spray application. Recommended for use on all interior wood surfaces, including floors, cabinets, doors, furniture, and paneling. Available in GLOSS, SEMI-GLOSS, and SATIN sheens.

Klenk's Epoxy Enamel is an extremely hard and durable two-component epoxy for consumer and professional use. It is specially designed to restore the finish on tubs, sinks, toilets, ceramic wall tiles, and appliances. Klenk's Epoxy Enamel can be used on any hard, solvent-resistant surface, such as ceramic, metal, stone, marble, melamine, fiberglass, etc. Do not use on plastic or imitation marble, stove top ranges, or other surfaces subject to excessive heat. Always test surface with Klenk's Epoxy Thinner prior to use. Klenk's Epoxy Enamel is available in three standard colors (White, Bone, Almond) as well as special order colors.

Circa 1850® AQUA is a water-based wood stain made with the finest ingredients. It is formulated to highlight the natural grain of unfinished wood without the need for a pre-stain conditioner. Circa 1850® AQUA eliminates overlap marks and grain raising, providing uniform, beautiful color. Circa 1850® Aqua Wood Stain is available in 30 vibrant woodtone and designer colors.

Circa 1850® Woodturner's Jelly is a gelled modified polyurethane varnish. It creates a rich patina and provides a true hand-rubbed finish that protects against heat, water and alcohol. Circa 1850® Woodturner's Jelly dries quickly - free from dust specks and brush marks. It is ideal for any woodturning projects and all wood furniture.

Circa 1850® DEX Marine Grade Exterior Varnish is a clear, tough coating that protects and beautifies all exterior wood surfaces. Renewable plant oils combined with a unique polymerized tung oil formula to provide a breathable, water repellant surface. Rain and snow cannot penetrate the coating to damage the wood. However, because moisture can escape from the wood through the varnish, the wood resists rotting and the varnish is less likely to blister or crack. Circa 1850® DEX Exterior Varnish incorporates transparent absorbers to screen out UV rays and inhibit the graying and fading effects of the sun. A superior fungicide and a mildewcide increase product performance. Circa 1850® DEX Exterior Varnish is recommended for use on all exterior wood surfaces; including window frames, doors, siding, fences and patio furniture. Its long-lasting protective finish makes it ideal for use on boats, decks and marinas. For interior woodwork we recommend Circa 1850® Bowling Alley Polyurethane .

ClearClad HSRis the first product to meet rigorous BHMA perspiration testing. It is leading product in the door hardware and plumbing industries. It is excellent choice for any application that needs excellent chemical and corrosion resistance.

ClearClad UVICLAD is a mercury lamp and LED curable product. Designed for conductive plastic, plated plastic or substrates that are exposed to normal thermal cure cycles.

ClearClad ULTEC is an e-coats made for the jewelry industry. ClearClad ULTEC provides excellent clarity and chemical resistance with lower (248°F) curing temperature.

ClearClad HSR 415 is built on the HSR platform. When combined with nanoceramics, it becomes a product with a very hard chemical resistant coating.

Clearclad Lectraseal Tektor has same properties as the lectraseal system, but with additional dry film lubricants to increase wear and scratch resistance. PTFE, molybdenum sulfide and boron nitride incorporated into the coating increases the coatings scratch and wear resistance.

419D-P pen applies an acrylic coating that cures to a durable, flexible and smooth finish. It functions as both a solder resist and a conformal coating. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D-P is used to repair scratches and chips in permanent solder masks, to touch up areas missed during conformal coating applications, or to repair conformal coating after replacing isolated components. It can also be used to protect conductive pen traces.

843AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with a highly conductive silver-coated copper flake. It is smooth, hard, and abrasion resistant. It is a ready-to-spray system, with no let down necessary. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PBT, PVA and ABS/PC blend. It provides excellent shielding levels at high frequencies. 843AR is designed to provide a conductive coating for the interior of plastic electronic enclosures that suppresses EMI/RFI emissions. It excels when higher levels of shielding are required.

Total Ground Carbon Conductive Paint 838AR is an economical conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with highly conductive carbon powder. It is smooth, durable, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. 838AR adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It provides strong corrosion resistance and is suitable for use in marine environments. 838AR is excellent for creating grounded surfaces and in low frequency RFI shielding applications, such as pickup cavities on electric guitars. It is also perfect for shielding metal detectors and other devices where a metal-filled conductive paint would cause malfunction.

Premium Acrylic Conformal Coating 419E is a 1-part, UL 746E certified, acrylic conformal coating. It cures to a durable, flexible and smooth finish. It is easy to apply and can be handled in 15 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419E creates a robust moisture barrier that protects printed circuit boards in humid environments. It provides strong protection against moisture, corrosion, fungus, dirt, dust, thermal shock, short circuits, high-voltage arcing, and static discharge.

422C is a 1-part, acrylic-silicone blend conformal coating that cures to a durable, flexible and smooth finish. It is easy to apply and can be handled in only 10 minutes. It may be removed with appropriate strippers or soldered through for repair or rework. 422C is designed for applications where both high service temperature and flexibility are required. It puts minimum stress on components during thermal cycling, making it ideal for applications that involve a wide temperature range. It provides strong protection against moisture, corrosion, fungus, dirt, dust, thermal shock, short circuits, high-voltage arcing, and static discharge.

EMI Conductive Paint 842WB is a 1-part, water-based conductive paint, pigmented with highly conductive silver flake. It is easy to use, with no let-down and no heat cure necessary. It can be applied by spray, brush or roller. It adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It also bonds well to drywall and can be painted over with common architectural paints. 842WB is designed to reduce EMI/RFI interferences in architectural and electronic applications.

Super Shield™ Silver Coated Copper Epoxy Conductive Paint 843ER is a 2-part epoxy-based conductive paint, pigmented with highly conductive silvercoated copper flake. The cured paint is smooth and extremely hard. It is abrasion, scratch, and mar resistant. It adheres very strongly to plastics, including chemically resistant and low energy plastics, as well as metal, glass, ceramic and wood. 843ER is generally used to provide extremely durable EMI/RFI shielding for applications in harsh environments.

EMF Shielding Paint 841WB is a 1-part, water-based conductive paint, pigmented with highly conductive nickel flake. It is easy to use, with no let-down and no heat cure necessary. It can be applied by spray, brush or roller. It adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It also bonds well to drywall and can be painted over with common architectural paints. 841WB is designed to reduce EMI/RFI interferences in architectural, electric musical and electronics applications.

Circa 1850® NU-LUSTRE-CR is a thick, high gloss epoxy Clear Casting Resin. One coat of NU-LUSTRE-CR equals up to 70 coats of varnish. NU-LUSTRE-CR is HEAT-Stable, remaining clear when other epoxies will haze or deform when hot objects are placed upon the surface. It can be applied over newspaper or magazine clippings, photographs, leather, wood, ceramic, rocks, dried flowers, shells and many other items. NU-LUSTRE-CR is the ideal coating for molds, tables, decorated serving trays, coasters and bar tops, and more.

Highly Conductive Silver Coating for EMI Shielding Semiconductor Packages 842UR is a 1-part, heat-cured, silver polyurethane coating. It is a smooth, flexible coating that provides excellent electrical conductivity at a low film thickness. It maintains flexibility at low temperatures, provides exceptional adhesion to a wide variety of substrates, and provides excellent environmental stability. 842UR is designed for large volume board-level or package-level EMI shielding applications. It can replace traditional metal lid, which reduces cost, board thickness, and mass.

844WB is a one-part, clear, water-based ESD paint made from a high quality aliphatic polyester urethane latex. It adheres strongly to plastics, paints, metals, and many other surfaces. The cured coating is flexible, durable, and will not crack, chip or peel. This non flammable, low odor, low VOC coating is used in electronic assembly lines to protect against electrostatic charge build-up on tools, production conveyor and bumpers, assembly trays, workstation surfaces, and enclosures. 844WB can be applied by roller, brush, manual and selective spray equipment.

419D-P pen applies an acrylic coating that cures to a durable, flexible and smooth finish. It functions as both a solder resist and a conformal coating. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D-P is used to repair scratches and chips in permanent solder masks, to touch up areas missed during conformal coating applications, or to repair conformal coating after replacing isolated components. It can also be used to protect conductive pen traces.

838AR-P pen dispenses an acrylic lacquer pigmented with conductive carbon. The cured traces are durable and corrosion resistant. They adhere well to plastics and most electronic substrates. The traces are flexible, but the product works best on a smooth, flat, hard surface. The valve tip opens when pressed against the surface, and the flow is controlled by squeezing the barrel. This pen repairs traces on keyboards, game controllers or remote controls. It is also good for making small connections, such as jumpers, through-holes, bridges, and links. It is great for drawing resistors too, and it can be used to increase the surface area of contacts by painting the area around them. Use this pen when high conductivity is not required. For applications requiring lower resistance, use the 841AR-P Nickel Conductive Pen or the 842AR-P Silver Conductive Pen.

419D-P pen applies an acrylic coating that cures to a durable, flexible and smooth finish. It functions as both a solder resist and a conformal coating. It is easy to apply and can be handled in 10 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419D-P is used to repair scratches and chips in permanent solder masks, to touch up areas missed during conformal coating applications, or to repair conformal coating after replacing isolated components. It can also be used to protect conductive pen traces.

Super Shield™ Silver Epoxy Conductive Paint 842ER is a 2-part silver epoxy conductive paint. It is a smooth, flexible coating that provides excellent electrical conductivity at a low film thickness. It maintains flexibility at low temperatures, provides exceptional adhesion to a wide variety of substrates, and provides excellent environmental stability. 842ER is designed for large volume board-level or package-level EMI shielding applications. It can replace traditional metal lid, which reduces cost, board thickness, and mass.

419E is a 1-part, UL 746E certified, acrylic conformal coating. It cures to a durable, flexible and smooth finish. It is easy to apply and can be handled in 15 minutes. It may be removed with appropriate strippers, or soldered through for repair or rework. 419E creates a robust moisture barrier that protects printed circuit boards in humid environments. It provides strong protection against moisture, corrosion, fungus, dirt, dust, thermal shock, short circuits, high-voltage arcing, and static discharge.

Nickel Conductive Pen 841AR-P pen dispenses an acrylic lacquer pigmented with conductive nickel flakes. The cured traces are durable and corrosion resistant. They adhere well to plastics and most electronic substrates. The traces are flexible, but the product works best on a smooth, flat, hard surface. The valve tip opens when pressed against the surface, and the flow is controlled by squeezing the barrel. This pen repairs damaged traces on keyboards, game controllers, remote controls, mixing boards, and PCBs. It also creates conductive traces for prototyping, hobbies, or maker projects. It is great for making small connections in or between circuits, such as jumpers, through-holes, bridges, and links. It can also be used to increase the surface area of contacts by painting the area around them. For applications requiring lower resistance, use the 842AR-P Silver Conductive Pen. For a more economical alternative, use the 838AR-P Carbon Conductive Pen.

Solvent Free Conformal Coating ECC3051S is a one-component, low viscosity silicone conformal coating material that cures on exposure to atmospheric moisture to form a flexible protective coating. ECC3051S conformal coating cures quickly in ambient conditions without the need for curing equipment, and can achieve faster tack-free time with exposure to mild heat. ECC3051S conformal coating can help reduce the potential for corrosion of electronic components, and under certain test conditions* has been found to surpass other polymers such as acrylics, polyurethane, polyolefin and other silicone polymers in corrosion prevention.

844AR is a one-part, solvent-based, permanent electrostatic dissipative (ESD) coating. It adheres strongly to plastics, paints, metals, and many other surfaces. The cured coating is flexible, durable, and will not crack, chip or peel. The coating can be cured at room temperature or higher. 844AR is commonly used in electronic assembly lines to protect against electrostatic charge build-up on tools, production conveyor and bumpers, assembly trays, workstation surfaces, and enclosures.

Super Shield™ Silver Coated Copper Conductive Paint 843AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with a highly conductive silver-coated copper flake. It is smooth, hard, and abrasion resistant. It is a ready-to-spray system, with no let down necessary. It has a quick dry time, with no heat cure necessary. 843AR adheres strongly to most injection- molded plastics, such as ABS, PBT, PVA and ABS/PC blend. It provides excellent shielding levels at high frequencies. 843AR is designed to provide a conductive coating for the interior of plastic electronic enclosures that suppresses EMI/RFI emissions. It excels when higher levels of shielding are required.

Silver Conductive Pen 842AR-P pen dispenses an acrylic lacquer pigmented with highly conductive silver flakes. The cured traces are durable and corrosion resistant. They adhere well to plastics and most electronic substrates. The traces are flexible, but the product works best on a smooth, flat, hard surface. The valve tip opens when pressed against the surface, and the flow is controlled by squeezing the barrel. This pen repairs damaged traces on keyboards, game controllers, remote controls, mixing boards, and PCBs. It also creates conductive traces for prototyping, hobbies, or maker projects. It is great for making small connections in or between circuits, such as jumpers, through-holes, bridges, and links. It can also be used to increase the surface area of contacts by painting the area around them. For applications where high conductivity is not required, the 838AR-P Carbon Conductive Pen and the 841AR-P Nickel Conductive Pen provide economical alternatives.