Brands results

724 IM-KOTE™ FLOOR is a profoundly crosslinked thermosetting polymer concrete system that forms a dense hard impermeable surface upon curing that is resistant to a very wide range of aggressive chemicals.

Endcor® Corrosion resistant coatings include silicone alkyd, thermo setting epoxy,inorganic zincs, acrylic urethane, water borne silicone, coal tar epoxy, elastomeric, cold galvanizing compound.

SW-244-40 VOC is a DOT grade clear, penetrating 40% alkylalkoxysilane water repellent designed for the protection of exterior above-grade concrete, brick masonry. It penetrates the surface and bonds chemically to the substrate, resulting in permanent attachment of the water repellent molecule. SW-244-40 VOC is not a coating and as a result will not discolor or change the surface appearance in any way.

Aqua-Gard™ is a clear, water protection product for new and existing above ground concrete and masonry substrates. Unlike regular water repellents, Sansin Aqua-Gard penetrates and bonds to the substrate allowing it to breathe while protecting the concrete and masonry from water and contaminants entering the substrate.

VARIPHOB® provides high performance silicone and wax based water repellents for various applications. Thanks to our many years of experience in the synthesis and emulsification of organically modified silicones and waxes, our products have unique combinations of properties. The VARIPHOB® product portfolio guarantees long-lasting and environmentally friendly protection of mineral surfaces, architectural paints and plasters.

Titanium dioxide pigment is a fine white powder. When used in paints, plastics or paper, it provides maximum whiteness and opacity. It gives paint high hiding power, meaning the ability to mask or hide a substrate. It does this more effectively than any other white pigment. Today, titanium dioxide pigment is the most important material used by the paints and plastics industry for whiteness and opacity. These unique properties are derived from the refractive index of titanium dioxide. The refractive index expresses the ability to bend and scatter light. Titanium dioxide has the highest refractive index of any material known greater even than diamond. To take advantage of this property, titanium dioxide must be mined, refined and ground to a fine, uniform particle size. Nature does not yield titanium dioxide in a form that is usable by our customers.

AV-290 Fast Set™ is a mid-range viscosity, dual component, hydrophobic MDI-based polyurethane resin designed to fill large voids on the exterior of below grade structures where high-water flow is present. Free rise expanding up to 2,600%, the fast-setting resin cures rigid, impermeable and closed-cell and can withstand wet/dry cycles.

Dry times comparable to conventional systems; excellent gloss and appearance; can achieve 150 g/L VOC for semigloss coatings with great brushability

This high solids surface tolerant epoxy mastic provides excellent chemical and water resistance. Intended for application to hand cleaned iron and steel, Tripoxy HB is recommended for submersion in fresh, salt, and waste water, when applied over blasted clean metal.

Lehigh offers MicroDyne™ MRPs in a range of particle sizes – from 830 microns (20 mesh) to 50 microns (300 mesh) – to fit a wide array of applications. Currently, Lehigh’s customers have deployed MicroDyne™ MRPs in plastics, asphalt, construction, coatings and other applications as well. MicroDyne™ can be made from tire rubber material, natural rubber, nitrile rubber, butyl rubber or EPDM rubber.

Alchemco’s Duratite presents you with professional quality waterproofing and surface protection products. Whether you need to plug an existing construction leak or need to lay new concrete, DuraTite will ensure you are covered with its unique formulation for efficient waterproofing. Protect your buildings from the harsh reality of Mother Nature with our complete line of Admixes, Plugs. Utilizing it as a part of our TechCrete, CretePro, or BridgeDECK waterproofing systems will enhance your structure and ensure its longevity against the elements.

AV-248 Flexseal is a moisture activated, MDI-based polyurethane resin whose chemical reaction is catalyzed by mixing AV-249 Flexseal AC with AV-248. Injected as a single component, AV-248 is designed to seal active and potential water leaks in various cracks and annular space where flexibility is needed, but is susceptible to wet/dry cycles. AV-248 cures resilient, impermeable, and flexible.

Uroseal™ 45V polyurethane joint sealant is a two-components, aliphatic, chemically curing, 100% solid urethane sealant formulated as a high build coating / joint sealing system for vertical and overhead use. Once cured, the material forms a high-quality elastomeric sealant. Uroseal™ 45V is ideally suited for indoors or outdoors with use on concrete, wood, and most construction materials. Uroseal™ 45V produces a flexible, long‐lasting sealant with extraordinary adhesion, cohesion, and elasticity that resists deterioration caused by weathering, stress, movement, water, oils, and many chemicals. Provides corrosion protection and chemical resistance; and because of its mixed gel‐state, it is specially designed for use on vertical and overhead applications.

https://neyra.com/products/sealers/sunshield/

Mortartec Silicate™ is an industrial-grade blend of Portland cement, graded silica sand, fibers and silica fume. The mortar may be hand or spray applied, typically from ½” to 2” in depth. Uses include repairing concrete walls, ceilings, lining brick or concrete infrastructure, etc. Mortartec Silicate provides an extremely dense matrix and will accept coatings at earlier ages than typical Portland cement repair products.

S-glass is a high performance glass fiber, distinguished from E-glass primarily by its higher silica content. S-glass typically contains the oxides of silicon, aluminum, and magnesium.