Products results

Norsodyne® 21032 - thixotropic, low peak exotherm and low shrinkage, promoted and non-waxed, good water resistance, lloyd's approved. Main applications areas are automotive, building and construction, industrial sector, marine etc.

G-501-MI-7 formulation is the same as the formulation for G-501 except G-501-MI-7 contains a lighter, static-eliminating ingredient. On a volume basis, G-501-MI-7 coating is half the weight of a G-501 coating.

Anchortech® Advanced Hybrid Sealant Crystal Clear is a fast dry, paintable, hybrid sealant provides excellent adhesion to fiberglass, plastic, wood, aluminum, steel, boat hardware and other substrates. Forms 100% waterproof seal. Stays flexible to withstand joint expansion and contraction caused by weather and temperature fluctuations. It won’t shrink, crack or break down. This product can be applied to wet surfaces and in low temperatures as low as 20°F. It dries fast so it’s rain proof and paint ready in 30 minutes. It is easy gunning, smooth tooling, low odor and VOC compliant. Once cured, the sealant is mold and mildew resistant.

DISTITRON® 429 BSX25Q - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce marine,boats through hand lay up and spray up method.

680SC Aliphatic Top Coat, vehicular deck coating system is an easy to install, liquid applied, abrasion resistant, low VOC, low odor Polyurethane waterproof system suitable for surfaces subject to vehicular traffic. The AVM System 680SC is a monolithic chemical resistant vehicular deck coating system that can withstand heavy thermal cycling. This elastomeric system is designed to expand and contract with normal structural movements and protect the surfaces against spalling, freeze/thaw damage, and chemicals commonly encountered on vehicular traffic decks. Installed and maintained properly, the AVM System 680SC vehicular deck system will provide years of service. ) Single-component, high adhesion, moisture cured, elastomeric polyurethane membrane.

Tambour Exterior Synthetic Wood Varnish No. 8 149-001 is synthetic glossy clear wood varnish for interior and exterior use.

NORSODYNE® S 83111 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating,hand lay up and spray up method.

DISTITRON® 100 SW - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through casting,mix with fillers and/or additives method.

DISTITRON® 412 RV2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce polymeric concrete through casting,mix with fillers and/or additives method.

SKAPS LTM 3715 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

Polynt Group SMC LS 3022 R30 is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. This SMC has been developed for structural parts. SMC LS 3022 R30 joint good mechanical properties and good surface. SMC LS 3022 R30 complies with BS 6920 water quality. SMC LS 3022 R30 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Tricolit® -Go is now also available in easy to apply spray cans! Tricolit GO coating features low friction and high abrasion resistance, and can be supplied in bulk for professional use and in easy-to-use spray cans for DIY enthusiasts. The Tricolit GO! coating comes in a convenient semi-gloss black color. Tricolit®-GO! has been developed within the strategic innovation program supporting the industrial graphene development in Sweden, SIO Grafen. The program is supported by the Swedish government agencies Vinnova, Energimyndigheten and Formas.

SKAPS DB 2400 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

CSM 600 is used in composite materials production as reinforcing filler with unsaturated polyester resins applied.

Return Polymers RP1110 is 100% recycled WHITE PVC pulverized into a 20 mesh powder and blended in large quantities to ensure consistency. Primarily used in fence, window, and siding applications with or without a capstock layer and processed by single and or twin screw extrusion. NEW - Pellets now available. Titanium dioxide level certification available.

PS102 is a chemically reactive deep penetrating siliconate sealer that is intended for unsealed and uncolored rough concrete and masonry. It creates a cross-linked insoluble methyl-silicone internal membrane that fuses within porous substrates of broom finished concrete and concrete block to combat freeze/thaw damage, reduce scaling and spalling, impart water repellence, and restrict moisture absorption. It also limits harmful effects of deicing chemicals and salts, acid rain deterioration, alkali attack, corrosion of reinforcing steel, and UV damage. PS102 decreases efflorescence and dusting, limits dirt build up, retards mold and mildew, and makes easier to clean and maintain. PS102 is breathable with minimal impact to traction coefficient. PS102 also contains film forming polymers for enhanced curing of broom finished concrete by allowing the slow release of moisture during the curing process while maintaining excellent breathability. The film forming polymers also provide superior freeze/ thaw protection in harsh climates. It is also UV resistant and nonyellowing. PS102 has a light milky appearance. Upon proper application, the substrate will have little, or no, noticeable change in appearance when dry.

Polynt Group SMC LPMC 7200 Low pressure is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. SMC LPMC 7200 is studied to be molded at low pressure and has been developed for co-molding with phenolic foam. SMC LPMC 7200 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

D2-200-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

Pennsealer EE-CT is a single component, waterbased, cationic, coal tar epoxy sealer / coating. Specially designed urethane modified epoxy polyelectrolyte emulsion offers unique interactive technology to this compound, which upon cure, produces a tough, durable and protective coating to the treated surface.

NORSODYNE® H 16439 AEP - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce isothermal sandwich panels through hand lay up and spray up method.

Polynt Group SMC LPMC 7300 RF is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. SMC LPMC 7300 RF is studied to be molded at low pressure. This SMC has been developed for electrical application. SMC LPMC 7300 RF joint good mechanical properties and good fire protection grade SMC LPMC 7300 RF is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

SEI Chemicals MD-1000 Water-Base is migrational and it cross-links within a coating system. This cross-linking forms a dehydration matrix that does not allow moisture to penetrate. This EPA registered antimicrobial additive prevents a wide variety of molds, fungi and bacterias. It can be used in any interior or exterior products including: paint, coating, wax, stain, preservative, wallpaper paste, water for spraying lumber or any coating used to protect any substrate where microbiological life can grow. The treated product and surface will continually eliminate and prevent all microbiological life forms including airborne spores.

DISTITRON® 120 V2,5 - Unsaturated polyester resin in styrene,DCPD. It is used to produce profiles through pultrusion method.

Northern Industries Hydro Seal 75 is a high strength, hydrophobic, breathing type, two-component, modified epoxy coating manufactured from a balanced ratio of fillers, and water extended resins and hardeners. Our exclusive formula combines flexibility with the hardness of epoxy resins.

Alabama Pigments Company Sun Buff Class Ii is a color hardener which are a pigmented cementitious powder that can be broadcast or dusted onto the surface of freshly placed concrete, to create a dense, abrasion-resistant surface that is permanently colored. Color hardeners can be troweled, broom finished or textured and stamped to create authentic looking stone or patterned textures. The use of color hardeners make it possible to achieve any number of bright or light colors, or any combination of them on gray concrete.

Devinyl 950 TG 2 is a high-quality filled fire retardant, pre-accelerated, brominated epoxy vinyl ester resin. It is designed for hand lay up molding as well as for spray application, RTM-technologies, pultrusion.

Madewell® 525™ provides excellent performance for structures exposed to ultraviolet light. It is used for both new construction and rehabilitation of concrete surfaces on decks and floors and in freshwater and saltwater aquariums and pools. Madewell® 525 is typically used as a topcoat over Madewell® 1312S epoxy coating (including broadcast quartz and vinyl flake) to provide ultraviolet light resistance and additional durability and corrosion protection. M Madewell® 525 is a polycarbamide based, high solids coating that can be cured at room temperature for a variety of plant, shop, and field applications. In addition to superior UV stability, Madewell® 525 offers dramatically improved weather, corrosion, and chemical resistance. Because of its low permeability to oxygen, water, and chlorides, Madewell® 525 remains unchanged after years of exposure to the elements allowing it to outperform such common coatings as alkyds, chlorinated rubber, acrylics, and siloxanes on a wide variety of substrates and service environments. Normally applied at 8 to 15 mils dry film thickness (DFT) in a single coat, its free spreading characteristics, fast set time, and easy cleanup help to minimize labor costs and down time.

Norsodyne® PT-207 - terephthalic resin for pultrusion. Main applications areas are building and construction, industrial sector etc.

Stypol® ACPW4000 is crystalline polystyrene shrinkage control additive. For use in SMC and BMC appliations. Excellent pigmentation for a wide range of colors. Main applications areas are building and construction, electronic and electrical, home and domestic applications, industrial sector etc.

PanTINT® 73 are pigment dispersions for industrial solvent based epoxy coatings. They consist of industrial quality organic and inorganic pigments finely milled in Bisphenol A carrier resin. The pigments chosen for the PanTINT 73 exhibit color strength, durability, chemical resistance and light fastness. Most are suitable for interior and exterior applications. The epoxy carrier resin along with a proprietary additive package allow for high pigment solids and superior compatibility with a number of epoxy based systems. The 73 series’ will be compatible with a wide range of epoxy resin formulations for industrial, maintenance and architectural coating applications.

L&L 300 RCM Mastic is a high-solids, waterborne, elastomeric coating. Its high permeability coupled with optimum brightness greatly reduces the occurrence of polyurethane foam blisters (delamination) which frequently develop when existing polyurethane foam has been compromised by water intrusion, then re-coated. L&L 300 RCM Mastic is engineered to allow entrapped moisture vapor to escape through its membrane. Its bright white reflective surface reduces surface temperature, and in turn, minimizes vapor drive. While L&L 300 RCM Mastic has many other uses, it was designed specifically for re-coating existing polyurethane roof decks.

UC Coatings Stay Clean Moss & Algae Prevention Solution - Ready to Use contains a mold and algae inhibitor that protects the film it forms on substrates from microbes. Stay Clean’s water-based acrylic binder chemistry will adhere to most porous surfaces. It is delivered in concentrated form and is easy to dilute, mix, and apply. Stay Clean combines high performance, ease of use and consumer safety with the environmentally-friendly benefits common to water-based technologies.

Armor AR500 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AR500 is a fantastic sealer if you are looking to bring out dull and faded surfaces, and enhance surfaces with a high gloss wet look finish. Color packs are available and can be mixed in to provide an opaque-colored high gloss finish. Non-slip additives are also available.

A1 Primecoat™ is a surface tolerant, two-component, multi-purpose primer (barrier coat). Formulated for high film build and long-term protection from salt/fresh water, as well as a wide variety of chemical exposures. Exceptional corrosion protection with advanced rust inhibitors. Excellent adhesion to tight rust. Fine adhesion to damp surfaces. Ideal for maintenance painting and fabrication shop applications. The high solids content ensures adequate protection of sharp edges, corners, and welds.

Fence Guard™ Stain Concentrate Expresso is the leader in wood protection and the makers of seal-once and anchorseal wood protection products. Fence Guard stain concentrate is available in four popular semi-transparent colors: Espresso, Coco Brown, Western Redwood, and Sierra Cedar. This is a water-based alkyd formula which provides penetrating oil finish but with easy water clean-up and ultra-low VOC. Fence Guard dilutes with 2 parts water to 1 part concentrate to produce a cost effective, high-quality penetrating stain for wood fences of all types. Fence Guard offers superior protection against the elements, with fade resistant high quality pigments and long-lasting water repellency.

Alabama Pigments Company Terra Cotta Class I is a color hardener which are a pigmented cementitious powder that can be broadcast or dusted onto the surface of freshly placed concrete, to create a dense, abrasion-resistant surface that is permanently colored. Color hardeners can be troweled, broom finished or textured and stamped to create authentic looking stone or patterned textures. The use of color hardeners make it possible to achieve any number of bright or light colors, or any combination of them on gray concrete.