Products results

JetFil® T390 is an off-white, extremely platy talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastic applications, including wood-plastic composites. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® 575P is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

JetFil® 625C is a very fine, high-purity, extremely platy, off-white talc with excellent top-size control that is recommended for excellent stiffness, HDT, and dimensional stability, as well as improved impact strength and esthetics in high-performance plastics. JetFil® 625C is also ideal for the nucleation of semi-crystalline plastics, for plastic films, for foamed plastics, and for flame retardant applications.

JetFil® 750C is a functional mineral that meets the demanding impact resistance and dimensional stability specifications required in automotive applications, such as bumpers and body panels. The product is compacted to increase bulk density and allow maximum compounding throughput. Its compaction level has been adjusted to provide an optimum handling/redispersion balance.

Crystic® Laminating Resin 4252.4 TEPA V01 is an orthophtalic, pre-accelerated, low styrene emission (LSE), thixotropic unsaturated polyester resin. This product can be used for spray application or for contact molding when fast mold turn-around or thick laminates are required. It is an incredibly versatile laminating resin, and its excellent mechanical properties make it ideal for bonding on acrylic sheets for sanitary use.

Crystic® Polyester Resin 990PA is a pre-accelerated, low-viscosity, modified orthophthalic polyester resin containing styrene and methyl methacrylate. It was developed for use as a filled system in reinforcing ABS acrylic-lined baths, sinks, and shower trays and is designed for spray laminating. This product has a 6-minute gel time.

Crystic® Resin PD10031PA – 01 is an acrylic-modified, UV-stabilized, high-quality, isophthalic neopentyl glycol unsaturated polyester resin. This product has been developed specifically for the casting of solid surfaces, where the applications can range from sanitary ware to vanity units to worktops. It is a low-color polyester resin designed to accept the maximum level of filler, such as aluminum trihydride (ATH) and colored chips or ground natural stone.

Crystic® Polyester Resin 123PA is a medium-thixotropic, tropicalized, pre-accelerated waxed unsaturated polyester resin. This resin is specially formulated to provide rapid wetting and impregnation of the reinforcement. It is ideally suited for the building of boats, water tanks, bathtubs, shower trays, and other products where water resistance is an important factor.

Crystic® Solid Surface Casting Resin 935PA is a pre-accelerated, high-performance, isophthalic neopentyl glycol unsaturated polyester resin. It is developed specifically for the casting of solid surface products. This high-clarity, low-color resin is supplied at a low to medium viscosity in order to accept the maximum level of fillers, including aluminum trihydrate (ATH) and colored chips or natural stone. For the production of flat sheets, where quicker gel times and cure times are required, Crystic® 935PAHR is available on request.

KAFRIT AT 0B790 LL offers a synergistic blend of fast and slow migrating products that yield a swift start-up and a long-lasting antistatic effect. Operating as an anti-static agent, it seamlessly accommodates blow molding and injection molding techniques. The formulation employs polyethylene (PE) as the carrier within a resin-based framework. This versatile formulation caters to consumer goods and the printing and packaging sectors.

MOCOM Compounds ALCOM® PBT 700/9 is a pre-drying conditions polybutylene terephthalate (PBT) with a matt (textured) surface, used in the building and construction, fixtures/fittings, and household goods. Typical applications include kitchenware, fixing elements, and more. Processing injection molding requires a melt temperature of 250-270°C and a mold temperature of 60-100°C. For proper use, keep in a dry, protected environment, not above 30°C, and pre-dry in a dry air (dessiccant) dryer at 100-120°C for 2-4 h, or in an air circulating dryer at 100-120°C for 4-8 h, depending on the moisture content.

MOCOM Compounds ALTECH® PP-H B 4910/500 MR10 is a polypropylene homopolymer that is processed using injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C, containing 10% talcum and being processing stabilized and easy release (demolding). It is used in the market segments of packaging, furniture, building and construction, and is suitable for injection molded parts, interior decoration/finishing. Typical applications include racking/shelving, household goods, housings, and functional components. To ensure a good quality of the product, it should be stored in a cool, dark place, not exceeding 30°C.

MOCOM Compounds CELLIDOR® CP 300-10 is a base polymer composed of cellulose acetate propionate, with a 10% phthalate-free plasticiser. It is suitable for use in the production of toothbrushes and other products. It should be pre-dried in an air circulating dryer at temperatures between 60-90°C for 2-4 hours, depending on the moisture content. For injection molding, the melt temperature should be between 180-230°C and the mold temperature should be between 40-80°C. No extra sentence required.

MOCOM Compounds ALCOM® ABS 530/29 SV1217-04MCO is a pre-drying Acrylonitrile/Butadiene/Styrene/Copolymer copolymer with a metallic effect, flow line optimized and easy flow features. It is mainly used in the electrical and electronic, building and construction, and household goods markets. For processing injection molding, the melt temperature should be 220-260°C and the mold temperature should be 50-80°C. Pre-drying conditions include 80°C in a dry air (dessiccant) dryer for 2-4 hours, and 80°C in an air circulating dryer for 3-6 hours depending on moisture content.

MOCOM Compounds ALTECH® ABS A 1000/180 is a base polymer composed of Acrylonitrile/Butadiene/Styrene/Copolymer with special features of injection molding grade and easy release (demolding). It has a maximum moisture content of <0.20%. For processing injection molding, the melt temperature should be between 200-240°C and the mold temperature should be between 50-80°C. This product is suitable for automotive, medical/personal care, and various other market segments and is recommended for applications such as domestic appliances, household goods, interior decoration/finishing, dashboard/instrument panels, impact protection/shock absorbers, and various other typical applications.

MOCOM Compounds ALFATER® XL A40I 4FC0010 is a thermoplastic vulcanizate (PP+EPDM) that is designed for injection molding applications. This material has a natural color with a bright inherent color and is compliant with EN 71-3 regulations for food contact. It is suitable for use in the packaging, household goods, food processing industry, toy markets, and other applications. The material has good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is easy to flow and can be used for injection molded parts such as seals, sealing lips, handles, soft-touch elements, protection caps, caps/closures, containers, kitchenware, and 2K components, making it a reliable choice for many applications.

MOCOM Compounds ALCOM® HM PA+ABS 1000 AG 14069 is a hygienic material composed of a Polyamide + Acrylonitrile Butadiene Styrene Blend, available in gray, similar to RAL 7015 and RAL 7042. It has antibacterial properties according to ISO 22196 and can be used for packaging, personal care, furniture, building and construction, and sport and leisure applications.

MOCOM Compounds ALCOM® HM PA+ABS 1000 AG 16077 is a hygienic material with antibacterial features according to ISO 22196. It is white in color, similar to RAL 9003, and is mainly used for injection molded parts such as sanitary articles, hygiene products, functional components, fittings, housings, clothing/fasteners. It is also suitable for applications such as packaging, personal care, furniture, building and construction, and sport and leisure.

MOCOM Compounds ALTECH® PP-H FC 1000/576 is a polypropylene homopolymer used in processing injection molding with a melt temperature of 200-240°C and a mold temperature of 20-70°C. It is nucleated and used in the food processing industry, building and construction, and electrical and electronic industries for the production of household goods, electrical components, domestic appliances, filter systems, injection molded parts, functional components, and housings. For optimal performance, it should be kept in the dark at temperatures not exceeding 30°C.

MOCOM Compounds ALTECH® PP-H FC 4940/100 TV40 is a Polypropylene Homopolymer with a filler/additive system of 40% talcum which offers high stiffness, high heat stabilization, processing stabilization, and easy release (demolding). It is suitable for applications in the electrical and electronic, building and construction, and personal care market segments, such as kitchenware, functional components, housings, and other household goods. To ensure its optimal performance, pre-drying conditions should be completed, and the processing injection molding should be carried out at specific melt and mold temperatures.

MOCOM Compounds ALFATER® XL A90I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) suitable for processing injection molding. It has special features such as food contact compliance with EN 71-3, good colorability, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is used in a variety of market segments such as packaging, household goods, food processing industry, toys, and is suitable for injection molded parts such as seals, sealing lips, handles, soft touch elements, protection caps, caps/closures, containers, kitchen ware and 2K components with a maximum service temperature range ranging from -40-125°C.

MOCOM Compounds ALCOM® PP 620/6 UV GY1380-05MCO is a gray, metallic, flow line optimized, and UV stabilized polypropylene homopolymer. It is suitable for pre-drying conditions in an air circulating dryer at 80-100°C for 2-4 hours, or in a dry air (dessiccant) dryer at 80-100°C for 2-3 hours, depending on moisture content. For injection molding, a melt temperature of 200-270°C and a mold temperature of 20-70°C are recommended. Typical applications include housings for household goods. To ensure the best performance, it should be kept dry and protected from light, not exceeding 30°C.

MOCOM Compounds ALTECH® PP-H B 2012/500 GF12 is a Polypropylene Homopolymer pre-dried in an air circulating dryer or in a dry air (dessiccant) dryer. The melt temperature for processing injection molding is 200-250°C and the mold temperature is 20-70°C. The filler/additive system is 12% glass fibers, chemically coupled, heat stabilized, with an easy release (demolding) and slip agent. The market segment for this material is Furniture, building and construction, sport and leisure, and various. The application area is for household goods and domestic appliances and the typical applications are furniture profile and racking/shelving.

MOCOM Compounds ALFATER® XL D40I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) suitable for food contact and compliant with EN 71-3. It has good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance with an easy flow. It is suitable for usage in packaging, household goods, food processing industry, toys, and injection molded parts such as seals, sealing lips, handles, protection caps, caps/closures, containers, and kitchenware.

MOCOM Compounds ALFATER® XL A80I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) suitable for pre-drying conditions in a dry air (dessiccant) dryer at a temperature of 70-80°C for 2-4 hours. It has good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance, as well as easy flow. It is compliant with EN 71-3, making it suitable for food contact, and is suitable for the packaging, household goods, food processing industry, toys, and injection molded parts, such as seals, sealing lip, handles, soft touch elements, protection caps, caps / closures, containers, kitchen ware, and 2K components.

MOCOM Compounds ALFATER® XL A60I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) of natural color, bright inherent color, and blue. Its pre-drying conditions include a dry air (dessiccant) dryer at 70-80°C for 2-4 hours, with a maximum moisture content of less than 0.10%. Special features of the polymer include being food contact compliant with EN 71-3, good colorability, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is used in the packaging, household goods, food processing industry, toys, and other areas for injection molded parts, such as seals, sealing lips, handles, soft touch elements, protection caps, caps/closures, containers, and kitchenware. It adheres to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALCOM® ABS 530/29 SV1462-06MCO is a pre-drying condition Acrylonitrile/Butadiene/Styrene/Copolymer with a metallic effect and special features of flow line optimization and easy flow. It is used for electrical and electronic, building and construction applications, such as household goods and housings. Its processing injection molding requires a melt temperature of 220-260°C and a mold temperature of 50-80°C.

MOCOM Compounds ALTECH® PP-B A 4930/507 MR30 is a Polypropylene Heterophasic Copolymer containing 30% talcum and is specially designed for building and construction, machinery, and household goods applications. It is highly heat stabilized and has easy release (demolding) and slip agent properties. Pre-Drying Conditions should be carried out in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or in an air circulating dryer at 80-120°C for 2-4 hours. Processing Injection molding should be carried out at a melt temperature of 200-250°C and a mold temperature of 20-70°C. The product should be stored in a cool, dry place and should not be exposed to temperatures above 30°C.

MOCOM Compounds ALPERFORM® PE SL FC 0205-14 EA is a base polymer consisting of polyethylene low density with a filler/additive system of 2% lubricant. It has a minimum shelf life of 6 months and is dosage dependent on application and operational area, with 5% extrusion and 5% injection molding. It has special features including a slip agent, migration towards surface, food contact, high additive content, free from cadmium, lead and diarylide pigments, high dispersibility, and dust-free. It is suitable for use in polyethylene low density, polyethylene linear low density, polyethylene high density, ethylene acrylic acid copolymer, polypropylene, and polypropylene copolymer.

MOCOM Compounds ALTECH® ECO PC 2030/200 GF30 is a polycarbonate base polymer containing 30% glass fibers and recycled material, suitable for applications such as plugs/connectors, housings, and other household goods and energy management. To ensure optimal performance, pre-drying conditions require a dry air (dessiccant) dryer at 100-120°C for 2-3 h, or an air circulating dryer at 100-120°C for 4-12 h depending on moisture content, with a maximum moisture content of <0.02%.

MOCOM Compounds ALCOM® HM PP 3030 19024 is a white polypropylene homopolymer with a 30% glass bead filler/additive system that has antibacterial properties according to ISO 22196. It is widely used in markets such as packaging, personal care, household goods, building and construction, and sport and leisure. Typical applications include sanitary articles, hygiene products, domestic appliances, kitchen ware, functional components, housings, handles, fittings, containers, and caps/closures.

MOCOM Compounds ALCOM® HM PP 1000 18038 is a pre-drying condition polypropylene copolymer with a hygienic material filler/additive system and a silver, metallic color similar to RAL 9022 and RAL 9023. It has antibacterial properties according to ISO 22196, and is used in packaging, personal care, household goods, furniture, building, and construction applications such as sanitary articles, hygiene products, kitchen ware, functional components, housings, handles, containers, and caps/closures. Processing injection molding requires a melt temperature of 200-270°C and a mold temperature of 20-70°C.

MOCOM Compounds CELLIDOR® CP FC 400.01-08 is a base polymer composed of cellulose acetate propionate containing 8% phthalate-free plasticiser. It is suitable for injection molding parts, food contact and typical applications such as toothbrushes. Pre-drying conditions should be in an air circulating dryer at 60-90°C for 2-4 h, depending on moisture content, with a maximum moisture content of 0.15%. Processing should be injection molding with a melt temperature of 180-230°C and a mold temperature of 40-80°C. To ensure quality, keep it dry and protected from light.

MOCOM Compounds ALTECH® PP-H A 3030/100 GB30 is a Polypropylene Homopolymer with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It is composed of 30% glass beads and a special filler/additive system that includes easy release (demolding), slip agent, and heat stabilization. It is commonly used in building and construction, sport and leisure, and is suitable for injection molded parts and interior applications such as household goods, hygiene products, and housings. To ensure optimal performance, it should be stored in a dry and light-protected environment at a maximum temperature of 30°C.

MOCOM Compounds ALTECH® PP-B B 2020/550 GF20 Pre-Drying Conditions is suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. The base polymer is a polypropylene copolymer with a filler/additive system of 20% glass fibers that is chemically coupled, processing stabilized, and has easy release (demolding) and heat stabilizing features. The market segment for this material is building and construction, packaging, and its application areas are household goods, power tools, exterior parts, and filter systems. Typical applications include racking/shelving, handles, housings, and functional components. For storage, this material should be kept dry, protected from light, and not above 30°C.

MOCOM Compounds ALFATER® XL A70I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) with natural and bright inherent colors. It has excellent features for food contact, compliant with EN 71-3, good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It has an easy flow and is ideal for use in the packaging, household goods, food processing industry, toys, and injection molded parts such as seals, sealing lips, handles, soft touch elements, protection caps, caps/closures, containers, kitchenware, and 2K components.