Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Processing Information (Injection Molding)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Flexural Modulus | 2100.0 | MPa | ISO 178 |
Flexural Stress (3.5% Strain) | 40.0 | MPa | ISO 178 |
Tensile Modulus | 1800.0 | MPa | ISO 527 |
Tensile Stress at Yield | 33.0 | MPa | ISO 527 |
Tensile Elongation at Yield | 5.9 | % | ISO 527 |
Tensile Elongation at Break | 25.0 | % | ISO 527 |
Impact Strength (Charpy, at 23°C) | 45.0 | kJ/m² | ISO 179/1eU |
Impact Strength (Charpy, at -40°C) | 14.0 | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Charpy, 23°C) | 4.0 | kJ/m² | ISO 179/1eA |
Notched Impact (Charpy, at -40°C) | 1.5 | kJ/m² | ISO 179/1eA |
Value | Units | Test Method / Conditions | |
Density | 1060.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
Vicat 850 | 95.0 | °C | ISO 306 |
HOT / A (1,8 MPa) | 65.0 | °C | ISO 75-1/-2 |
DSC (Melt Point) | 166.0 | °C | ISO 11357 |
Value | Units | Test Method / Conditions | |
Mould Temperature | 20 - 70 | °C | — |
Melt Temperature | 200 - 250 | °C | — |
Value | Units | Test Method / Conditions | |
Melt Index (MVR) | 18.0 | cm³/10min | ISO 1133 |
MVR temperature | 230.0 | °C | — |
MVR load | 2.16 | kg | — |
Shrinkage (lengthwise, 24h) | 1.2 - 1.6 | % | ISO 294-4 |
Shrinkage (lateral, 24h) | 1.3 - 1.7 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In a dry air (dessiccant) dryer 80-120 °C for 2-3 h
- In an air circulatIng dryer 80-120 °C for 2-4 h
Storage & Handling
- Storage Conditions
Store in dry, protected from light not above 30°C.