Industrial & Assembly Adhesives


Mitsubishi Chemical Group
jER™ YX8000D
Chemical Family: Bisphenol Epoxy Resins, Epoxy & Epoxy Derivatives, Bisphenol A Type Epoxy
End Uses: Semiconductor Applications, Radiation Curable Coating
Polymer Name: Epoxy Resins & Compounds
Compatible Substrates & Surfaces: Glass, Fibers & Fabrics, Metal, Plastics, Steel, Aluminum, Ceramic, Concrete & Masonry
jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs


Mitsubishi Chemical Group
jER™ YL980
Chemical Family: Bisphenol Epoxy Resins, Epoxy & Epoxy Derivatives, Bisphenol A Type Epoxy
End Uses: Semiconductor Applications
Polymer Name: Epoxy Resins & Compounds
Compatible Substrates & Surfaces: Glass, Fibers & Fabrics, Metal, Steel, Plastics, Aluminum, Ceramic, Concrete & Masonry
jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with significantly low chlorine content. It can be used for electrical and electronic applications. Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives


Mitsubishi Chemical Group
jER™ YX4000
Chemical Family: Epoxy & Epoxy Derivatives
End Uses: Powder Coating, Semiconductor Applications
Polymer Name: Epoxy Resins & Compounds
Compatible Substrates & Surfaces: Glass, Fibers & Fabrics, Metal, Steel, Plastics, Aluminum, Ceramic, Concrete & Masonry
jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. Features Abrasion, heat and water resistance Electrical insulation Wear resistance Product Highlights Significantly low melt viscosity (melting point: 108°C) Low chroline content Low water absorption Applications Electrical and electronic applications (EMC, solder resist, PCB) Potting and encapsulation materials Powder coatings for ship bottoms Adhesives Composites


Mitsubishi Chemical Group
jER™ YX8040
Chemical Family: Epoxy & Epoxy Derivatives
End Uses: Semiconductor Applications
Polymer Name: Epoxy Resins & Compounds
jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. IOt can be used for optical materials such as LED encapsulants and adhesives for displays. Features High purity Transparency LED-curable UV-curable


Kraton
Kraton™ FG1901 G
Polymer Name: Styrene Ethylene Butylene Styrene (SEBS)
Chemical Family: Styrene Copolymers, Styrenic Block Copolymers, Styrenics
Additives Included: Impact Modifier
Processing Methods: Compounding
Features: Linear Polymer Structure
Kraton FG1901 G is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. FG1901 GT - supplied as a dusted pellet Kraton FG1901 G is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.


DuPont
THIXON® P-11-EF
Ready to Use Product Type: Primer, 1K (1 component) Adhesive & Sealant
Compatible Substrates & Surfaces: Elastomers & Rubbers, Aluminum, Metal, Steel
Features: Excellent Water Resistance, Salt Water/Spray Resistant, Good Bonding Strength, Excellent Substrate Adhesion
THIXON® P-11-EF is a vulcanizing adhesive primer used with all MEGUM® or THIXON® cover coat adhesives for bondingmost elastomers to various substrates. It can also be used as a one coat for bonding polar elastomers and will bondmetal substrates including hot and cold rolled steel, stainless steel alloys, brass, aluminum and zinc plated metals. It is a very good general use primer coat for rubber to metal applications. Providing excellent boiling water and salt spray resistance.


Dynasol Elastomers
Solprene® 1205
Chemical Family: Styrene-Butadiene Copolymer
End Uses: Footwear, Hot-Melt Adhesive, Solventborne Adhesive & Sealant, Asphalt Modification, Pressure Sensitive Adhesive
Features: Anti-Oxidant, Linear Polymer Structure, High Clarity, Food Contact Acceptable, Low Temperature Resistant, Random Copolymer, Low Gel, Temperature Resistance
Function: Binder & Resin, Processing Aid
Polymer Name: Solution Styrene Butadiene Rubber (SSBR)
Processing Methods: Extrusion
Solprene 1205 is a linear random-block styrene-butadiene copolymer with a total content of 25% of styrene, 17.5% is present as a polystyrene block.It has a non-staining antioxidant system; FDA approved for use in food contact applications. Is essentially gel free with a clear color.Solprene 1205 is an excellent modifier for asphalt, formulations of caulks and sealants; it is also an excellent processing aid for most polymers, giving a good resistance to low temperature. Used in extruded goods, soles and heels. It can also be used as modifier for thermoplastic resins and in adhesive formulations.


DuPont
THIXON® OSN-2-EF
Ready to Use Product Type: 2K (2 component) Adhesive & Sealant, 1K (1 component) Adhesive & Sealant
Compatible Substrates & Surfaces: Brass, Elastomers & Rubbers, Aluminum, Metal, Steel, Plastics
Features: Good Bonding Strength, Excellent Substrate Adhesion
THIXON® OSN-2-EF is a general purpose one-coat adhesive used for bonding various elastomers to metals, such as hot and cold rolled steel, stainless steel alloys, brass, aluminum, and zinc plated metals._x005F THIXON® OSN-2-EF bonds Natural Rubber (NR), Polybutadiene (BR), Polyisoprene (IR), Styrene Butadiene Rubber (SBR), Chloroprene (CR) and Polyacrylate (ACM)._x005F THIXON® OSN-2-EF is also used for post-vulcanization bonding. In addition, THIXON® OSN-2-EF bonds rubber to synthetic fibers such as rayon and polyester. It is a good general purpose rubber to substrate bonding agent that can be used as single coat or two coat system. The use of a ROBOND, THIXON® or MEGUM® primer or a two coat system will provide the best environmental resistance, however THIXON® OSN-2-EF does quite well as a stand alone coating in many general rubber to metal bonding situations.


DuPont
BETASEAL® 1766 EU
Ready to Use Product Type: Structural Adhesive & Sealant, 1K (1 component) Adhesive & Sealant, Solvent free (100% Solids) Adhesive & Sealant
Compatible Substrates & Surfaces: Glass, Coated & Painted Surfaces
Application Method: Pneumatic Gun
Chemical Family: Polyurethanes (PU)
Cure Method: Moisture Cure
BETASEAL® 1766 EU is a high viscosity, high modulus, glass bonding adhesive that can be used primerless to paint and glass. Due to its chemistry, it delivers a high initial handling strength to hold the position of the bonded parts. It is a one component, ambient moisture curing, solvent free adhesive for direct glazing applications. It shows excellent sag and bead stability. Skin formation and curing are dependent on humidity, temperature and application dimension.


DuPont
THIXON® 715-EF&B
Ready to Use Product Type: 2K (2 component) Adhesive & Sealant, 1K (1 component) Adhesive & Sealant
Compatible Substrates & Surfaces: Elastomers & Rubbers, Metal, Plastics
Features: Excellent Water Resistance, Good Bonding Strength, Good Solvent Resistance, Excellent Substrate Adhesion, Oil Resistant, Heat Resistance
THIXON® 715-EF&B by DuPont is commonly used as Bonding Adhesive for a variety of applications in Industrial and Automotive.


DuPont
THIXON® 423 Clear
Ready to Use Product Type: 1K (1 component) Adhesive & Sealant
Compatible Substrates & Surfaces: Metal, Plastics
Features: Excellent Substrate Adhesion, Good Bonding Strength, Heat Resistance
THIXON® 423 Clear is a vulcanizing adhesive which can be used as a one-coat adhesive or as a covercoat adhesive over THIXON®403/404 adhesive primer for bonding castable polyurethane to various substrates.THIXON®423 can also be used as a one-coat adhesive for bonding thermoplastic polyurethanes to metal. THIXON®423 can also be used as a protective coating for metal, polyurethane, epoxy, polyester and fiberglass compounds. It is a good one-coat system for thermoplastic urethane to metal bonding with better heat resistance that THIXON® 405.


DuPont
THIXON® 2001-EF
Ready to Use Product Type: 1K (1 component) Adhesive & Sealant
Compatible Substrates & Surfaces: Elastomers & Rubbers, Metal, Plastics
Application Method: Brush, Roll Coater
Features: Good Bonding Strength, Excellent Dry Film Stability, High Reactivity, Excellent Substrate Adhesion
THIXON® 2001-EF is a vulcanizing adhesive that can be used as a one-coat adhesive or as a two-coat system applied cover THIXON® P-11-EF or THIXON® P-6-EF adhesive primers. It bonds with a wide variety of elastomers, including natural rubber, SBR, chloroprene, EPDM, butyl and nitrile.THIXON® 2001-EF is formulated at the proper viscosity and solids content to give the desired dry film thickness for maximum bonding in one coat brushing or roller coat applications. It is a vulcanizing adhesive that can be used as a one-coat adhesive or as a two-coat system applied over THIXON® P-11-EF or P-6-EF adhesive primers. THIXON® 2001-EF represents the highest reactivity of any of the cover coat adhesives in our product line and is used to pick up difficult to bond rubber compounds


DKSH
Luna-cure PACM-20
Chemical Name: 4,4'-Diaminodicyclohexyl methane
CAS Number: 1761-71-3
Chemical Family: Diamines
Function: Monomer, Curing & Hardening Agent
Luna-cure PACM is a cycloaliphatic diamine. Luna-cure PACM is mainly used as a hardener for epoxies. The curing of epoxy resins at high temperatures leads to excellent mechanical properties and good resistance against alkalis, acids, hydrocarbon solvents and water. This product is available in Europe, Asia and North America.


DuPont
THIXON® P-11
Ready to Use Product Type: 1K (1 component) Adhesive & Sealant
Compatible Substrates & Surfaces: Elastomers & Rubbers, Metal, Plastics
Features: Excellent Substrate Adhesion, Good Bonding Strength
THIXON® P-11 is a solvent-based primer, used in combination with MEGUM® or THIXON® cover coats. THIXON® P-11 can also be used as a one-coat adhesive for the bonding of polar elastomers (NBR, AEM, ACM). COMPOSITION: THIXON® P-11 consists of reactive polymers and pigments in methyl isobutyl ketone (MIBK). It is formulated without reportable levels of lead or other toxic heavy metals. ENVIRONMENTAL RESISTANCE: Rubber-to-metal bonding systems using THIXON® P-11 display resistance to severe environmental exposures such as humidity and corrosion. Properly prepared bonds will also resist heat, salt fog, oil and water exposures.


Mitsubishi Chemical Group
jER™ 1256
Chemical Family: Epoxy & Epoxy Derivatives, Bisphenol A Type Epoxy
Polymer Name: Epoxy Resins & Compounds
Function: Binder & Resin, Plasticizer, Adhesion Promoter, Resin, Impact Modifier, Coupling Agent
jER™ 1256 is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. Features High molecular weight High softening points Good film former Hydrolysis resistance Flexibility Strong adhesion Applications PCM, CAN, and other coatings Paints Fiber-reinforced materials Thermoplastics Printed eectronics Plastic processing


Clariant
Hostavin® 3212 LIQ
Function: UV Absorber, Light Stabilizer
End Uses: Top Coat, Radiation Curable Coating, Other Coating Type, Clearcoat
Compatible Polymers & Resins: Polyurethanes (PU), Acrylics, Polyesters
Hostavin® 3212 LIQ is a 2:1 synergistic mixture of an oxalanilide based UV absorber with a low molecular weight HALS.


Kraton
Kraton™ D4150 K
Polymer Name: Styrene Butadiene Styrene (SBS)
Chemical Family: Styrenic Block Copolymers, Styrenics
Processing Methods: Coating, Compounding
Kraton D4150 K is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from North America in the physical form identified below. Kraton D4150 KT - supplied as a dusted porous pellet Kraton D4150 KU - supplied as an undusted porous pellet Kraton D4150 K is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications, molded and extruded goods applications and may be used in formulating adhesives, sealants, and coatings.


Mitsubishi Chemical Group
jER™ YL983U
Chemical Family: Bisphenol Epoxy Resins, Epoxy & Epoxy Derivatives, Bisphenol F Type Epoxy
End Uses: Semiconductor Applications
Polymer Name: Epoxy Resins & Compounds
Compatible Substrates & Surfaces: Glass, Fibers & Fabrics, Metal, Steel, Plastics, Aluminum, Ceramic, Concrete & Masonry
jER™ YL983U is is a Bisphenol A-type liquid epoxy resin with significantly low chlorine content and low viscosity. It can be used for electrical and electronic and semiconductor applications. Benefits Excellent adhesiveness Good elastic recovery Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Low viscosity Applications Electrical and electronic applications Potting & encapsulation materials Adhesives


Kraton
Kraton™ MD1653 M
Polymer Name: Styrene Ethylene Butylene Styrene (SEBS)
Chemical Family: Styrenic Block Copolymers, Styrenics
Features: Food Contact Acceptable
Kraton MD1653 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton MD1653 MO supplied as an organic dusted dense pellet Kraton MD1653 M is used as a modifier of polymers. It is also suitable as an ingredient in formulating adhesives, sealants and coatings. Note: This Kraton polymer product is a development product. Thus, its properties and chemical composition may change based on market feedback. Kraton Polymers reserves the right to change specifications and/or discontinue production of the product.


Momentive Performance Materials
CoatOSil™ MP 200 Silane
Function: Adhesion Promoter, Binder & Resin, Coupling Agent, Crosslinking Agent
Chemical Family: Silanes, Silicon-based Compounds, Epoxy & Epoxy Derivatives
Compatible Polymers & Resins: Polyurethanes (PU), Acrylics, Epoxies (EP)
End Uses: Solventborne Coating, Waterborne Adhesive & Sealant, Waterborne Coating, Solventborne Adhesive & Sealant
CoatOSil™ MP 200 silane promotes adhesion in a broad range of applications via multiple epoxy and silane groups on each oligomer chain. Its gamma-gylcidoxy propyl epoxide ring reacts with many organic groups while its alkoxy silane groups promote adhesion to inorganic substrates. Condensation of its silanol groups can also provide crosslinks between polymer chains.


Kraton
Kraton™ D1193 P
Polymer Name: Styrene Isoprene Styrene (SIS)
Chemical Family: Styrenic Block Copolymers, Styrenics
Processing Methods: Compounding
Kraton D1193 P is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied from North America in the physical form identified below. Kraton D1193 PT - supplied as a dusted dense pellet Kraton D1193 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.


DuPont
THIXON® 6110F
Ready to Use Product Type: 1K (1 component) Adhesive & Sealant
Compatible Substrates & Surfaces: Wood, Glass, Metal
Features: Excellent Substrate Adhesion, Good Bonding Strength
THIXON® 6110F is a vulcanizing adhesive used to thermally laminate polypropylene copolymers to substrates such as metal, glass and wood. This product is a one-part dispersion and must be mixed well before and during use. Cohesive failure bonds are typical for most polypropylene copolymer materials.


DuPont
THIXON® 511-EF
Ready to Use Product Type: 1K (1 component) Adhesive & Sealant
Compatible Substrates & Surfaces: Elastomers & Rubbers, Metal, Plastics
Features: Good Bonding Strength
THIXON® 511-EF is a vulcanizing cover coat adhesive used with THIXON® or MEGUM® adhesive primers for bondingnatural rubber, SBR, EPDM, chloroprene, chlorosulfonated-polyethylene, butyl, and nitrile rubbers. It is formulated without reportable levels of lead (or other heavy metals), chlorinated solvents and ozone depleting chemicals.THIXON® 511-EF can also be used as a splice adhesive for bonding uncured rubber compounds to previously cured rubbers, and as an intermediate adhesive with a tie coat adhesive for open steam or autoclave curing tank linings. It is agood long-standing cover coat adhesive that has been used in very demanding application in building, automotive andi ndustrial applications. Along with the appropriate THIXON® OR MEGUM® Primers, this system will provide robust performance on an economical basis.


Clariant
Antimussol® Z 70
Function: Anti-Foaming Agent, Defoamer
Antimussol® Z 70 is a liquid foam control agent with very low silicone content for adhesives, coatings and inks based on synthetic latex emulsions. Antimussol® Z-70 is very effective during the mixing, dispersing and milling processes. Due to its components, it is easily dispersed and acts immediately to release entrapped air in foam bubbles and to prevent undesired foam built-up. It maintains its efficiency during long periods of agitation. The recommended dosage is 2.4-3.2 kg of Antimussol® Z-70 for 1000 liters of paint. This amount is sufficient to control the foam efficiently.In adhesives we recommend dosages between 1-2 % of Antimussol® Z-70 based on the total latex solids. This defoamer can be used as it is or as a water dispersion.


Momentive Performance Materials
Silquest™ A-1100
Function: Coupling Agent, Adhesion Promoter
Chemical Family: Silanes
Compatible Polymers & Resins: Phenolic Resins, Silicones, Polyurethanes (PU), Polysulfide Rubber, Epoxies (EP), Acrylics
Features: Good Pigment Dispersion
Silquest™ A-1100 silane coupling agent, gamma- Aminopropyltriethoxysilane, a versatile amino-functional coupling agent may be an excellent candidate for use in a range of broad applications to provide superior bonding between inorganic substrates and organic polymers.


DuPont
MEGUM® 3290-1
Ready to Use Product Type: 1K (1 component) Adhesive & Sealant
Compatible Substrates & Surfaces: Elastomers & Rubbers, Metal, Plastics
Features: Good Weather Stability, Outdoor Durability, Good Bonding Strength, Excellent Substrate Adhesion
MEGUM® 3290-1 is a one-coat bonding agent for bonding fluorocarbon rubbers to metals and other rigid substrates during volcanization. Also suitable for other common curing systems including bisphenolic and peroxide curing. MEGUM® 3290-1 is a rubber to substrate bonding system with more aggressive crosslinking chemistry to give good environmental resistance in the finished good.


DuPont
BETASEAL® 1001 EM
Ready to Use Product Type: Structural Adhesive & Sealant, 1K (1 component) Adhesive & Sealant
Compatible Substrates & Surfaces: Glass
Application Method: Pneumatic Gun
Chemical Family: Polyurethanes (PU)
Cure Method: Moisture Cure
BETASEAL® 1001 EM is a medium viscosity, high modulus, non conductive, fast curing glass bonding adhesive which requires a primer during the process. It is a one component, ambient moisture curing adhesive for direct glazing applications. It shows excellent sag and bead stability. Skin formation and curing are dependent on humidity, temperature and application dimension. BETASEAL® 1001 EM has a 3 hour Safe-Drive-Away-Time, crash tested to FMVSS 212 specification with twin airbags.


DuPont
MEGUM® 3290-1LD
Ready to Use Product Type: 1K (1 component) Adhesive & Sealant
Compatible Substrates & Surfaces: Elastomers & Rubbers, Metal, Plastics
Application Method: Spray, Brush
Features: Outdoor Durability, Excellent Dry Film Stability, Excellent Substrate Adhesion
MEGUM® 3290-1LD is a vulcanizing adhesive that can be used as a one-coat adhesive for the bonding of fluorocarbon rubbers to metals and other solid materials under vulcanization conditions. It is suitable for all common curing systems including bisphenolic and peroxide curing. MEGUM® 3290-1LD gives an outstanding resistance to external influences and high temperatures, and may be used with all conventional vulcanization methods. It is a rubber to substrate bonding system with more aggressive crosslinking chemistry to give good environmental resistance in the finished good.


DuPont
THIXON® OSN-2-EF-VV
Ready to Use Product Type: 1K (1 component) Adhesive & Sealant
Compatible Substrates & Surfaces: Elastomers & Rubbers, Aluminum, Metal, Steel, Plastics, Coated & Painted Surfaces
Features: Good Bonding Strength, Excellent Substrate Adhesion
THIXON® OSN-2-EF-VV is a general purpose one-coat adhesive for bonding various elastomers to metals, such as hot and cold rolled steel, stainless steel alloys, brass, aluminum, and zinc plated metals. Formulated without reportable levels of lead (or other heavy metals), chlorinated solvents and ozone-depleting chemicals._x005F THIXON® OSN-2-EF-VV can bond Natural Rubber (NR), Polybutadiene (BR), Polyisoprene (IR), Chlorosulfonated polyethylene (CSM), Styrene Butadiene Rubber (SBR), Chloroprene (CR) and Polyacrylate (ACM)._x005F THIXON® OSN-2-EF-VV is also used for post-vulcanization bonding. In addition, product bonds rubber to synthetic fibers such as rayon and polyester. It is a good general purpose rubber to substrate bonding agent that can be used as single coat or two coat system. The use of a ROBOND, THIXON® or MEGUM® primer or a two coat system will provide the best environmental resistance however THIXON® OSN-2-EF-VV does quite well as a stand alone coating in many general rubber to metal bonding situations._x005F THIXON® OSN-2-EF-VV is designed for faster curing cycles and possibly lower curing temperatures.


Kolon Industries
SUKOREZ® SU-640
Function: Tackifier
Chemical Family: Hydrocarbons, Aliphatics
End Uses: Other Adhesive & Sealant, Pressure Sensitive Adhesive, Hot-Melt Adhesive
Compatible Polymers & Resins: Polyolefins, Ethylene Co-terpolymers, Styrene Copolymers
Features: Heat Resistance
SUKOREZ® SU-640 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA), as well as polypropylene (PP) modifier. SUKOREZ® SU-640 is water white cycloaliphatic hydrocarbon resin. The major usage are a modifier in blends with polymers for filmic application and tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.


Kraton
UNI-REZ™ 2930
Chemical Family: Polyamides
End Uses: Flexography Ink
Features: Broad Range of Viscosity, Chemical Resistance, Excellent Adhesion, Water Resistance
UNI-REZ 2930 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 2930 polyamide resin provides fast solvent release and good grease resistance in flexographic / gravure inks for plastic substrates and is especially effective as an overprint lacquer.


Kraton
UNI-REZ™ 110
Chemical Family: Polyamides
End Uses: Solventborne Adhesive & Sealant, Flexography Ink, Other Ink Types, Gravure Ink
Compatible Substrates & Surfaces: Nitrocellulose
Features: High Gloss, Good Compatibility, Blocking Resistance, Excellent Adhesion
UNI-REZ 110 polyamide resin is an alcohol soluble / co-solvent type resin with excellent solvent release and blocking properties. UNI-REZ 110 polyamide resin was developed for release lacquers but can also be used as a modifying resin to improve hardness.