Products

Accepta® BT-4 is a mildly alkaline blended liquid treatment based on organic tannins. It should be used in conjunction with other supplemental treatments to give a balanced treatment program. Accepta® BT-4 does not add substantially to the boiler water TDS or alkalinity. Accepta® BT-4 controls corrosion by the dual mechanism of oxygen scavenging and the formation of a corrosion-resistant iron-tannate film.Please speak to us about designing a complete boiler water treatment plan.

Accepta® CG821 is a chlorine stable, non-volatile liquid corrosion inhibitor and scale dispersant for naturally soft and artificially softened waters. It is an alkaline molybdate based inhibitor containing threshold agents, dispersant and organic inhibitors to offer protection to multi-metal systems without the requirement of additional specific corrosion inhibitors.CG products are best combined with an oxidizing and non oxidizing biocide, please see our storefront for biocides.

Accepta® Corrosperse 84 antifoulant is a non-acid blend of sequestering and dispersing agents for the removal of iron oxide, other metallic oxides and scale deposits from open and closed systems. It may also be used continuously at low levels to prevent deposits forming. Accepta® Corrosperse 84 is a safe, non-toxic alternative to ammoniated citric acid for precommission cleaning and poses minimal effluent disposal problems.

Activ-Ox® Foam Cleaning system offers the ability to effectively clean light to moderately fouled packs in-situ by combining the disinfecting power of chlorine dioxide with the cleaning and descaling power of a weakly acidic surfactant mixture. The system produces a high-cling foam which is applied to the surfaces to be cleaned under low pressure. The potential hazard of aerosols is avoided and the cleaning effect can be observed visually. Accepta® Activ-Ox® Foam Clean is based on phosphoric acid and incorporates a foaming agent tolerant to acid and chlorine dioxide.

Accepta® CB55 is a corrosion inhibitor based on a blend of organic and inorganic corrosion inhibitors including Nitrite and Molybdate to protect steel, copper, and other non-ferrous metals. As such Accepta® CB55 is an ideal treatment for closed chilled water and low-pressure heating systems. Accepta® CB55 is not intended for use in systems containing Aluminum for this we recommend a Molybdate only treatment such as Accepta® CB50.

Accepta® CB28 is a blended liquid treatment based on sulphite which combines the functions of oxygen scavenger (catalyzed), alkalinity builder, and sludge conditioner. It is an ideal single treatment for low-pressure steam boilers using softened make-up water, particularly where phosphate addition is not desired or required.

Accepta® BG520 or BROMGARD 520 is a heavy metal free, silicate based blend of inorganic and organic scale and corrosion inhibitors combined with a bromine pre-cursor. The product provides scale and corrosion control over a wide range of water qualities and operational conditions. When used in conjunction with ACTIVATOR 120 or 150 the correct level of “bromine” is released to control microbiological growth in the system.

Accepta® BS100 is a solution of a powerful non-ionic surface-active agent and antifoam. The product improves the performance of systems, where fouling by slimes is reducing efficiency, by removing and dispersing the deposits. It is particularly effective in conjunction with chlorine/bromine based biocides and is ideally suited to be dosed in conjunction with hypochlorite for cooling tower disinfections. Accepta® BS100 is effective in both recirculating and once-through cooling systems.

Accepta® CB24 is a blended liquid treatment based on sulphite which combines the functions of oxygen scavenger, alkalinity builder, phosphate treatment, and sludge conditioner for an all in one Boiler Water Treatment.

Accepta® Activator 120 is a stable liquid activating solution specifically formulated for use with selected Accepta® BG cooling water inhibitors to release the biocidal power of bromine. Your BG product will be chosen based upon your make-up water chemistry taking into consideration water hardness. For more information on the inhibitors please see our store.

Accepta® BC-BQ is a highly efficient polymeric cationic microbiocide. It is a non-foaming product ideally suited for use in cooling waters to control algae and aerobic and anaerobic bacteria over a wide pH range.

Accepta® 2827/BC-ITA is a broad spectrum, non-foaming, readily biodegradable micro-biocide for use in industrial cooling water systems. It is based on a formulation of Isothiazoline derivatives and is completely soluble in water. At relatively low concentrations it is effective against a range of microorganisms including many gram-positive and gram-negative bacteria, fungi, and algae.

Accepta® CG501 is a heavy metal free, silicate based blend of inorganic and organic scale and corrosion inhibitors. The product is stable over a wide range of temperature and pH variations and provides scale and corrosion control over a wide range of water qualities and operational conditions. It is non-volatile.

Accepta® Bromgard 110 is a liquid corrosion inhibitor and scale dispersant for naturally soft and artificially softened waters. It is a molybdate-based alkaline product, containing threshold agents, dispersants and organic inhibitors offering excellent protection to multi-metal systems. BROMGARD products include a bromine precursor, enabling in-situ generation of bromine in treated systems when dosed in conjunction with ACTIVATOR 120/150. Bromine is a highly effective oxidizing biocide, offering greater efficacy than chlorine when it is used in moderately alkaline evaporative cooling systems.

Accepta® CB41 is a corrosion inhibitor based on a blend of organic and inorganic corrosion inhibitors intended to protect steel, copper, and other non-ferrous metals. As such Accepta® CB41 is an ideal treatment for closed chilled water and low-pressure heating systems. Accepta® CB41 is NOT intended for use in systems containing Aluminum. When compared with more traditional nitrite-borate based corrosion inhibitors, Accepta® CB41 offers the benefit of a lower dosage rate and will raise the system TDS to a much lesser degree.

Accepta® BG320 is a stable, non-volatile liquid corrosion inhibitor and scale dispersant. It is an alkaline blend of anodic and cathodic inhibitors based on phosphate, a threshold deposit control agent, a sludge conditioner combined with a bromine pre-cursor and offers protection to multimetal systems. When used with AC120 or 150 the correct level of “bromine” is released to control microbiological growth in the system.

Accepta® BC-RO is a broad spectrum non-oxidizing biocide solution based on DBNPA for use in a range of applications such as cooling water, pulp and paper processing, metal working fluids and the treatment of RO membranes. It is particularly rapid in its action and has an excellent environmental profile because it degrades quickly and naturally.

Accepta® CG 364 is a chlorine stable, non-volatile liquid corrosion inhibitor and scale dispersant. It is an alkaline blend of anodic and cathodic inhibitors based on phosphate, a threshold deposit control agent, a sludge conditioner and offers protection to multi-metal systems.

Accepta® CG815 is a chlorine stable, non volatile liquid corrosion inhibitor and scale dispersant, for use in open evaporative cooling systems. It is an alkaline blend of corrosion inhibitor, a threshold deposit controller and sludge conditioner offering protection to multi-metal systems without the requirement of additional specific corrosion inhibitors.

Accepta® PT4F is a blended liquid treatment based on organic tannin, polymer sludge conditioners and alkali. It can be used either by itself or in conjunction with other supplemental treatments to give a balanced treatment program for steam boilers.

Accepta® BG810 is an alkaline blend of corrosion inhibitor, a threshold deposit control agent, sludge conditioner and bromine pre-cursor. The product provides protection to multi-metal systems without the requirement of additional specific corrosion inhibitors. When used in conjunction with ACTIVATOR 120 the correct level of ‘bromine’ is released to control microbiological growth in the system.

Accepta® 2309/CB50 is a corrosion inhibitor based on a novel blend of organic and inorganic corrosion inhibitors, including molybdate, intended to protect steel, copper and other nonferrous metals.Recommended for use with a non oxidizing biocide such as Accepta 2827/BC-ITA