Knowde Enhanced TDS
Identification & Functionality
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Benefits
- The masterbatch will mix well into existing resin and color concentrate formulations
- Can be used with any melt processable resin system
- Allows for wire and cable constructions to be marked permanently
- High contrast ratios are achievable
- Can also be produced as a ready-to-use (RTU) compound
Applications & Uses
- Markets
- Plastics & Elastomers Processing Methods
- End Uses
Fluoropolymer jacket or insulation where a laser-markable surface is required. Custom compounds may be available upon request.
Properties
- Physical Form
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Base Resin | FEP | — | — |
| Melt Flow Rate | 30 | g/10 min | — |
Regulatory & Compliance
- Hazardous Substances
This product does not contain lead, hexavalent chromium, or cadmium, and are used in applications where RoHS (Restrictions on the use of Certain Hazardous Substances) compliance is required.
Technical Details & Test Data
- Processing
These products are added (approximately 3%), along with a standard color concentrate, to natural fluoropolymer resin and processed using conventional thermoplastic such as melt extrusion.
Safety & Health
- Safe Handling Information
A summary of the hazards, as defined by OSHA Hazard Communication Standard, 29 CFR 1910.1200 for this product are:
Physical hazards: None
Health hazards: NoneFOR ADDITIONAL INFORMATION AND HANDLING INSTRUCTIONS READ AGC CHEMICALS AMERICAS, INC. MATERIAL SAFETY
DATA SHEET.
Storage & Handling
- Handling Precautions
Heating Fluon® and Fluon+™ products in excess of 750°F (399°C) can produce toxic fumes. It is, therefore, necessary to provide local exhaust ventilation in areas where Fluon® products are exposed to high temperatures. Avoid breathing fumes or contaminating smoking tobacco with fumes, powder, or dust.
Thermal decomposition of this product will generate hydrogen fluoride, which is corrosive. Corrosion resistance materials are required for prolonged contact with molten resin.