Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- End Uses
Bronze powder is added to PTFE to increase the thermal and electrical conductivity and to improve the wear properties and deformation resistance without sacrificing the chemical and thermal resistance of the polymer.
Properties
- Typical Physical Properties
| Value | Units | Test Method / Conditions | |
| Deformation Under Load | 3.5 | % | AGC Chemicals |
| Elongation | 200 | % | ASTM D-4745 |
| Filler Content | 60 | % | ASTM D-4745 |
| Hardness Peak | 69 | Shore D | ASTM D-2240 |
| Hardness Sustained | 67 | Shore D | ASTM D-2240 |
| Specific Gravity | 3.91 | — | ASTM D-4745 |
| Tensile Strength | 3000 | PSI | ASTM D-4745 |
| Wear Performance (at 5,000 PV - Dynamic Coefficient of Friction) | 0.13 | in³-min/ftlb-hr | ASTM D-3702 |
| Wear Performance (at 5,000 PV - Wear Factor, K) | 5 | in³-min/ftlb-hr | ASTM D-3702 |
Technical Details & Test Data
- Processing
This product can be processed using compression molding equipment to mold thick-walled parts.
Safety & Health
- Safe Handling Information
A summary of the hazards, as defined by OSHA Hazard Communication Standard, 29 CFR 1910.1200 for this product are:
Physical hazards: None
Health hazards: None
Packaging & Availability
- Packaging Type
- Packaging
Fluon+ FC 146 is packaged in a lined cardboard fiber drum containing 130 pounds.
Storage & Handling
- Handling Precautions
Heating Fluon® and Fluon+™ products in excess of 750°F (399°C) can produce toxic fumes. It is, therefore, necessary to provide local exhaust ventilation in areas where Fluon® products are exposed to high temperatures. Avoid breathing fumes or contaminating smoking tobacco with fumes, powder, or dust.
Thermal decomposition of this product will generate hydrogen fluoride, which is corrosive. Corrosion resistance materials are required for prolonged contact with molten resin.