Products

Corrosion protection additive for water-based coating systems. SCHWEGO corrit 6831 is primarily a rust converting additive for water-based coatings. Typical applications are: Anticorrosive primers, One-coat anticorrosive systems, Maintenance finishes.

Slip additive for solvent-borne coating systems. SCHWEGO mar 8304 is suitable for solvent-based systems as: air drying alkyds, alkyd/melamine combinations, self crosslinking and co-reacting polyacrylates, polyurethanes, nitrocellulose, acid curing melamine and urea systems, oil-free polyesters.

Defoamer for water-based coating systems, VOC- and silicone free. SCHWEGO foam 8325 can be used in emulsion paints, water-based coatings, silicate paints, adhesives and plasters.

Slip and leveling additive for water-based and UV-curing coating systems with wetting additive. SCHWEGO mar 6542 is mainly used in UV curing coating systems.

Highly effective wetting additive for solvent borne and water-based coating systems, free of PFOS & PFOA, based on environmental compliant C4, C6 technology. SCHWEGO fluor 6536 is suitable for solvent borne and water-based coating systems. Typical applications are:Reduction of surface tension; Prevention of floating and flooding effects; Prevention of cratering; Coating of edges; Co-wetting additive for pigment pastes.

Defoamer and deaerator for water-based coating systems, silicone free. BLISTER FREE 55 has an excellent defoaming effect in all types of water-based alkyd systems, for instance in alkyd emulsions with and without co-solvents. There are also very good defoaming effects in modified alkyds and alkyd/acrylic hybrids.

Wetting and dispersing additive for water-based coating systems, biodegradable, VOC-free. SCHWEGO wett 6295 shows excellent dispersing properties, preferred application during dispersion of organic and inorganic pigments in high solid content or systems of high PVC. SCHWEGO wett 6295 is intended for use in all water-based air drying, stoving and 2K-systems. It is compatible with the following binders:Alkyd resins, PE-systems, Epoxy esters, Acrylates, Styrene acrylates, PU-systems. SCHWEGO wett 6295 maintains the moisture level and can therefore also be used as humactant (advantageous when using e.g. PEG 400).

Corrosion protection additive for solvent borne coating systems. KORRODUR is primarily a rust converting additive for solvent borne alkyd resin paints. KORRODUR also has a good anticorrosive effect in solvent-based coating systems based on epoxy, chlorinated rubber or acrylic binders. Typical applications are: Anticorrosive primers, One-coat anticorrosive systems, Maintenance finishes. For aluminum-pigmented systems we recommend KORRODUR AL 2.

Corrosion protection additive for solvent borne coating systems. KORRODUR AL 2 is especially suitable for aluminum-pigmented systems, as its particular formulation prevents possible gassing in the drum. KORRODUR AL 2 is primarily a rust converting additive for solvent-based alkyd resin paints. KORRODUR AL 2 also has a good anticorrosive effect in solvent borne coating systems based on epoxy, chlorinated rubber or acrylic binders. Typical applications are:Anticorrosive primers, One-coat anticorrosive systems, Maintenance finishes.

Wetting and dispersing additive for solvent borne coating systems. SCHWEGO wett 6248 is especially suitable for enamels and industrial-, wood-, furniture coatings and pigment preparatios. The application in pigment preparations is recommended.

Highly effective wetting additive for solvent borne, water-based and high solid coating systems, free of PFOS & PFOA, based on environmental compliant C4, C6 technology. SCHWEGO fluor 6543 is suitable for solvent borne and water-based coating systems. Typical applications are:Reduction of surface tension; Prevention of floating and flooding effects; Prevention of cratering; Coating of edges; Co-wetting additive for pigment pastes.

Multifunctional additive with good wetting and dispersing properties for solvent-based and water borne coating systems, biodegradable. ANTIGEL is mainly used in solvent containing systems based on alkyds, alkyd/melamine, nitrocellulose combinations and polyesters. The above mentioned properties of ANTIGEL are also suitable for coating systems based on alkyds, alkyd/acrylic and other systems.

Defoamer for solvent borne and water-based coating systems, silicone free. BLISTER FREE 75 shows very good defoaming properties in solvent borne: NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic systems, BLISTER FREE 75 has very good defoaming effect in water-based coating systems based on the following binders: Long oil alkyds, Medium oil alkyds, Acrylate/medium oil alkyds, Acrylate/long oil alkyds, Epoxides.

Multifunctional additive for water-based and solvent borne coating systems, free of ketoxime and aromates, biodegradable. ANTIGEL KF-D can be used in almost all water-based and solvent borne coating systems.

Corrosion protection additive / passivasion for residual rust on steel. SCHWEGO inhibitor 6818 is used primarily undiluted as a pretreatment product against residual rust on iron and steel surfaces. SCHWEGO inhibitor 6818 is not a coating and therefore the treated surface must be protected by a suitable coating system. Types of paints and the number of coatings needed will be dertermined by the aggressiveness of the environment. SCHWEGO inhibitor 6818 is perfect for the restoration of all kinds of steel parts, for instance in the industrial sector, but also for machineries, vehicles and chemical-technical plant components. SCHWEGO inhibitor 6818 shows a very good solvent stability and is recoatable with must current coating systems. SCHWEGO inhibitor 6818 is also used as a rust converting additive for water-based coating systems. Typical applications are anticorrosive primers, one-coat anticorrosive systems and maintenance finishes.

Rheological additive for water-based coating systems, free of VOC, APEO and organotin. SCHWEGO pur 8025 is suitable for interior and exterior wall paints as well as for synthetic resin renderings and trowelling compounds or paste fillers based on polyacrylics, styrene copolymers, PU-dispersions or water thinnable alkyd systems. The high gloss retention is shown to particular advantage in glossy emulsion paints when compared with acrylic or cellulose based thickening additives.

Defoamer for water-based coating systems, free of silicone. SCHWEGO foam 6325 can be used in emulsion paints, water-based coatings, silicate paints, adhesives and plasters.

Antiskinning additive for water-based and solvent-borne coating systems, free of ketoxime, biodegradable. SCHWEGO antimec is recommended in almost all water-based and solvent borne coating systems. Effectiveness of antiskinning may be reduced in long oil alkyd systems.

Defoamer for water-based coating systems, silicone free. SCHWEGO foam 8013 is a highly effective defoamer suitable for water- based systems and adhesives especially for those based on polyurethane and acrylate.

Multifunctional additive for water-based and solvent borne coating systems, free of ketoxime, biodegradable. ANTIGEL KF can be used in almost all water-based and solvent borne coating systems.

Deaerating additive for solvent borne, water-based and solvent free coating systems, silicone free. SCHWEGO foam 6351 is suitable for almost all solvent-based and solvent free coating systems. It is particularly effective in hammer tone finishes and structural coatings, reactive thick film systems, heavily pigmented coating systems and formulations, suitable for airless spraying. SCHWEGO foam 6351 is also effective in aqueous industrial finishes (alkyd/melamine systems).

Defoamer and deaerating additive for water-based coating systems, VOC- and silicone free. SCHWEGO foam 8333 is especially suitable to defoam systems based on polyurethane, polyester and their hybrids. It is effective as defoamer and as de-aerating additive.

Wetting and dispersing additive for solvent borne and water-based coating systems, anionic, biodegradable, VOC-free. SCHWEGO wett 6267 is especially suitable for enamels and industrial-, wood-, furniture coatings and pigment preparations. The application in pigment preparations is recommended.

Antiskinning additive for water-based and solvent borne coating systems, free of butanonoximes and aromates. SCHWEGO antimec 8019 is recommended in almost all water-based and solvent borne coating systems.

Slip additive for water-based coating systems. SCHWEGO mar 8305 is suitable for water borne systems such as: air drying alkyd resins, alkyd/melamine combinations, self and foreign crosslinking polyacrylic resins, polyurethanes, nitrocellulose systems, acid curing melamine and urea systems, oil-free polyesters.

Defoamer for water-based, solvent borne and solvent free coating systems, VOC- and silicone free. SCHWEGO foam 6377 is especially suitable in polyester systems and alkyd/polyester systems. SCHWEGO foam 6377 is suitable in epoxy, PUR- and acrylate systems.

Slip additive for water-based and solvent borne coating systems, VOC-free. SCHWEGO mar 8311 is mainly used in solvent borne air drying and stoving coating systems. SCHWEGO mar 8311 can be used in most binder systems except some with hydroxyl groups.

Polymeric wetting and dispersing additive for solvent borne coating systems, biodegradable. SCHWEGO wett 8083 is virtually suitable for all solvent-based industrial finishes. It is especially suitable for flexo graphic inks.

Levelling additive for water-based coating systems, VOC-free. SCHWEGO flow 8058 can be used in virtually all water thinnable coating systems. SCHWEGO flow 8058 contains water as the only volatile component, which makes it especially suitable for solvent free water thinnable systems.

Defoamer for solvent borne and water-based coating systems, VOC-free. SCHWEGO foam 6354 is effective in almost all water-based and solvent borne 1K- and 2K-coating systems composed of: Air drying and stoving alkyds, Epoxy systems, PU-systems, Acrylics, Special areas of application are thick film systems, printing inks and coil coating systems.

Rheological additive against settling for solvent borne coatings, biodegradable. NO SED is suitable for solvent borne coatings based on alkyde (oven and air drying), acrylic, epoxy, polyester, chlorinated rubber, automotive and industrial coatings as well as road marking paints and zinc dust primers.

Corrosion protection additive / passivasion for residual rust on steel. SCHWEGO inhibitor 6817 is used primarily undiluted as a pretreatment product against residual rust on iron and steel surfaces. SCHWEGO inhibitor 6817 is not a coating and therefore the treated surface must be protected by a suitable coating system. Painting should be carried out preferably within 48 hous after application of SCHWEGO inhibitor 6817. Types of paints and the number of coatings needed will be dertermined by the aggresiveness of the environment. SCHWEGO inhibitor 6817 is perfect for the restoration of all kinds of steel parts, for instance in the industrial sector, but also for machineries, vehicles and chemical-technical plant components. SCHWEGO inhibitor 6817 shows a very good solvent stability and is recoatable with must current coating systems.SCHWEGO inhibitor 6817 is also used as a rust converting additive for water-based coating systems. Typical applications are anticorrosive primers, one-coat anticorrosive systems and maintenance finishes.

Defoamer for water-based coating systems, VOC-free, biodegradable. SCHWEGO foam 8336 defoams very well in all kinds of clear coatings and slightly pigmented systems, printing inks and UV-curing systems, especially those based on acrylics. The defoaming effect is also very good in wood varnishes and adhesives.

Wetting and dispersing additive for water-based coating systems, VOC- and silicone free, biodegradable. SCHWEGO wett 8319 can be used in almost all water-based coating systems.

Levelling additive for water-based coating systems. SCHWEGO flow 6527 is recommended for aqueous coatings, printing inks and overprint varnishes.

Highly effective wetting additive for solvent borne, water-based, high solid and UV-curing coating systems, free of PFOS & PFOA, based on environmental compliant C4-technology. SCHWEGO fluor 6523 is suitable for solvent borne and water-based coating systems. Typical applications are:Wetting additive for pigment pastes; Decrease of surface tension; Prevention of floating and flooding effects; Prevention of cratering; Coating of edges.