Products

Corrosion protection additive for water-based coating systems. SCHWEGO corrit 6831 is primarily a rust converting additive for water-based coatings. Typical applications are: Anticorrosive primers, One-coat anticorrosive systems, Maintenance finishes.

Slip additive for solvent-borne coating systems. SCHWEGO mar 8304 is suitable for solvent-based systems as: air drying alkyds, alkyd/melamine combinations, self crosslinking and co-reacting polyacrylates, polyurethanes, nitrocellulose, acid curing melamine and urea systems, oil-free polyesters.

Highly effective wetting additive for solvent borne and water-based coating systems, free of PFOS & PFOA, based on environmental compliant C4, C6 technology. SCHWEGO fluor 6536 is suitable for solvent borne and water-based coating systems. Typical applications are:Reduction of surface tension; Prevention of floating and flooding effects; Prevention of cratering; Coating of edges; Co-wetting additive for pigment pastes.

Slip and leveling additive for water-based and UV-curing coating systems with wetting additive. SCHWEGO mar 6542 is mainly used in UV curing coating systems.

Defoamer and deaerator for water-based coating systems, silicone free. BLISTER FREE 55 has an excellent defoaming effect in all types of water-based alkyd systems, for instance in alkyd emulsions with and without co-solvents. There are also very good defoaming effects in modified alkyds and alkyd/acrylic hybrids.

Multifunctional additive for water-based and solvent borne coating systems, free of ketoxime and aromates, biodegradable. ANTIGEL KF-D can be used in almost all water-based and solvent borne coating systems.

Corrosion protection additive for solvent borne coating systems. KORRODUR AL 2 is especially suitable for aluminum-pigmented systems, as its particular formulation prevents possible gassing in the drum. KORRODUR AL 2 is primarily a rust converting additive for solvent-based alkyd resin paints. KORRODUR AL 2 also has a good anticorrosive effect in solvent borne coating systems based on epoxy, chlorinated rubber or acrylic binders. Typical applications are:Anticorrosive primers, One-coat anticorrosive systems, Maintenance finishes.

Corrosion protection additive for solvent borne coating systems. KORRODUR is primarily a rust converting additive for solvent borne alkyd resin paints. KORRODUR also has a good anticorrosive effect in solvent-based coating systems based on epoxy, chlorinated rubber or acrylic binders. Typical applications are: Anticorrosive primers, One-coat anticorrosive systems, Maintenance finishes. For aluminum-pigmented systems we recommend KORRODUR AL 2.

Defoamer for solvent borne and water-based coating systems, silicone free. BLISTER FREE 75 shows very good defoaming properties in solvent borne: NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic systems, BLISTER FREE 75 has very good defoaming effect in water-based coating systems based on the following binders: Long oil alkyds, Medium oil alkyds, Acrylate/medium oil alkyds, Acrylate/long oil alkyds, Epoxides.

Corrosion protection additive / passivasion for residual rust on steel. SCHWEGO inhibitor 6818 is used primarily undiluted as a pretreatment product against residual rust on iron and steel surfaces. SCHWEGO inhibitor 6818 is not a coating and therefore the treated surface must be protected by a suitable coating system. Types of paints and the number of coatings needed will be dertermined by the aggressiveness of the environment. SCHWEGO inhibitor 6818 is perfect for the restoration of all kinds of steel parts, for instance in the industrial sector, but also for machineries, vehicles and chemical-technical plant components. SCHWEGO inhibitor 6818 shows a very good solvent stability and is recoatable with must current coating systems. SCHWEGO inhibitor 6818 is also used as a rust converting additive for water-based coating systems. Typical applications are anticorrosive primers, one-coat anticorrosive systems and maintenance finishes.

Multifunctional additive with good wetting and dispersing properties for solvent-based and water borne coating systems, biodegradable. ANTIGEL is mainly used in solvent containing systems based on alkyds, alkyd/melamine, nitrocellulose combinations and polyesters. The above mentioned properties of ANTIGEL are also suitable for coating systems based on alkyds, alkyd/acrylic and other systems.

Levelling additive for water-based coating systems, VOC-free. SCHWEGO flow 8058 can be used in virtually all water thinnable coating systems. SCHWEGO flow 8058 contains water as the only volatile component, which makes it especially suitable for solvent free water thinnable systems.

Deaerating additive for solvent borne, water-based and solvent free coating systems, silicone free. SCHWEGO foam 6351 is suitable for almost all solvent-based and solvent free coating systems. It is particularly effective in hammer tone finishes and structural coatings, reactive thick film systems, heavily pigmented coating systems and formulations, suitable for airless spraying. SCHWEGO foam 6351 is also effective in aqueous industrial finishes (alkyd/melamine systems).

Wetting and dispersing additive for solvent borne and water-based coating systems, anionic, biodegradable, VOC-free. SCHWEGO wett 6267 is especially suitable for enamels and industrial-, wood-, furniture coatings and pigment preparations. The application in pigment preparations is recommended.

Defoamer for solvent borne and water-based coating systems, VOC-free. SCHWEGO foam 6354 is effective in almost all water-based and solvent borne 1K- and 2K-coating systems composed of: Air drying and stoving alkyds, Epoxy systems, PU-systems, Acrylics, Special areas of application are thick film systems, printing inks and coil coating systems.

Multifunctional additive for water-based and solvent borne coating systems, free of ketoxime, biodegradable. ANTIGEL KF can be used in almost all water-based and solvent borne coating systems.

Levelling additive for water-based coating systems. SCHWEGO flow 6533 is recommended for aqueous coatings, printing inks and overprint varnishes.

Corrosion protection additive / passivasion for residual rust on steel. SCHWEGO inhibitor 6817 is used primarily undiluted as a pretreatment product against residual rust on iron and steel surfaces. SCHWEGO inhibitor 6817 is not a coating and therefore the treated surface must be protected by a suitable coating system. Painting should be carried out preferably within 48 hous after application of SCHWEGO inhibitor 6817. Types of paints and the number of coatings needed will be dertermined by the aggresiveness of the environment. SCHWEGO inhibitor 6817 is perfect for the restoration of all kinds of steel parts, for instance in the industrial sector, but also for machineries, vehicles and chemical-technical plant components. SCHWEGO inhibitor 6817 shows a very good solvent stability and is recoatable with must current coating systems.SCHWEGO inhibitor 6817 is also used as a rust converting additive for water-based coating systems. Typical applications are anticorrosive primers, one-coat anticorrosive systems and maintenance finishes.

Highliy effective defoamer solvent borne coating systems, silicone free, biodegradable. BLISTER FREE 77 is especially suitable in polyester systems with and without paraffins and alkyd/polyester systems. BLISTER FREE 77 is suitable in epoxy, PUR- and acrylate systems but not siutable for water-based polyester coatings.

Multifunctional additive with good wetting and dispersing properties for solvent borne and water-based coating systems. ANTIGEL 6217 is mainly used in solvent containing systems based on alkyds, alkyd/melamine, nitrocellulose combinations and polyesters. The above mentioned properties of ANTIGEL 6217 are also suitable for coating systems based on alkyds, alkyd/acrylic and other systems.

Bernd Schwegmann BLISTER FREE 3 is a defoamer and deaerator for solvent borne and water-based coating systems, silicone-free. BLISTER FREE 3 can be used in solvent borne and water-based systems. In solvent borne systems BLISTER FREE 3 is particularly effective as deaerating and partially also as leveling additive. BLISTER FREE 3 is especially suitable for systems based on:Alkyd, Alkyd/polyester, Unsaturated polyester, PU, Acrylates. BLISTER FREE 3 is also very effective in water-based coating systems, particulary if they are based on:Alkyd/acrylics, Saturated polyesters, Epoxy systems.

Slip additive for solvent-borne coating systems. SCHWEGO mar 8300 is mainly used in solvent-based air drying and stoving coating systems. SCHWEGO mar 8300 can be used in most binder systems except some with hydroxyl groups.

Defoamer for solvent borne coating systems. BLISTER FREE 66 is especially suitable in polyesters, polyurethanes and acrylic systems. BLISTER FREE 66 can be used as a defoaming additive in nearly all solvent borne coating systems.

Deaerating additive for solvent borne, water-based and solvent free coating systems, free of silicone. SCHWEGO foam 6331 is suitable for almost all solvent borne and water-based coating systems. It is particularly effective in printing inks.

Slip- and leveling additive for water-based and UV-curing coating systems, VOC-free. SCHWEGO mar 6562 is mainly used in UV curing coating systems.

Defoamer for solvent borne coating systems, biodegradable. BLISTER FREE 88 is especially suitable in polyester systems free from paraffins. BLISTER FREE 88 shows also good defoaming in epoxy, PUR and acrylate based systems.

Defoamer for water-based and UV-curing coatings, free of silicone. SCHWEGO foam 6360 shows excellent defoaming action in UV coatings and is also suitable for coatings based on alkyd, polyester, epoxy, PU and acrylate.

Levelling additive for solvent-borne coating systems, silicone-free. SCHWEGO flow 8060 is used in solvent borne or solvent free coating systems. SCHWEGO flow 8060 is effective in nearly all binder systems and it is not suitable for water-based coating materials.

Defoamer for solvent borne coating systems, silicone free. BLISTER FREE 54 is effective in almost all solvent borne 1- and 2-K as well as solvent free coating systems as follows: Air drying and stoving alkyds, Epoxy systems, PU systems, Acrylics, Thick coating systems. Special applications are printing inks and coil coating systems.

Rheological additive for water-based coating systems, VOC-, APEO- and organotin-free. SCHWEGO pur 8051 is free of organotin and is therefore especially recommended for the use in textile printing inks according to Oeko-Tex® Standard 100. SCHWEGO pur 8051 is suitable for interior and exterior wall paints, water-based coatings and anticorrosive coatings, modified resin plasters and fillers based on polyacrylates, styrene copolymers or PU-dispersions. SCHWEGO pur 8051 shows a high gloss retention in glossy emulsion paints compared to acrylic and cellulosic thickening additives.

Levelling additive for water-based coating systems. SCHWEGO flow 6527 is recommended for aqueous coatings, printing inks and overprint varnishes.

Defoamer for water-based and solvent borne coating systems, silicone free. SCHWEGO foam 6375 shows good defoaming action in solvent borne coating systems: NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic systems, SCHWEGO foam 6375 has very good defoaming effect in water-based coating systems based on the following binders: Long oil alkyds, Medium oil alkyds, Acrylate/medium oil alkyds, Acrylate/long oil alkyds, Epoxides.