Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Application Area
- Procedure for Applying
1. As with all adhesive bonds, surface preparation is a vital part of the process. Carefully clean both surfaces to be bonded with MEK if possible. If MEK is not compatible with the surfaces to be bonded, another suitable solvent may be used.
2. Allow cleaned surfaces to dry completely.
3. Die cut 124-33-F to the of the size of interface area, remove one of the protective liners, position onto one of the surfaces to be bonded, and warm the substrate/adhesive to 125°C or more.
4. By applying pressure, laminate the film/adhesive to the substrate smoothing out any trapped air. Allow to cool to room temperature and peel off the other release liner.
5. Position the other substrate and apply a clamp to provide constant pressure.
6. Cure for 10 minutes at 170°C.
7. Remove pressure. Part is ready for use.
Properties
- Typical Cured Properties
- Properties
- Solderable - No
Value | Units | Test Method / Conditions | |
Useful Temperature Range | -55 to 200 | ºC | — |
Volume Resistivity | 0.0005 | Ω cm | — |
Glass Transition Temperature | 100 | °C | — |
Lap Shear Strength | min. 250 | Psi | — |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- General Film Description
Substrate Type: PET Release Liner
Conductive Coating Type: Silver/PolymerProduct Code Adhesive Thickness (mils)
124-33-F1 1 124-33-FF2 2 124-33-FF3 3 124-33-F4 4 124-33-F5 5
Storage & Handling
- Shelf Life
- 12 Months
- Shelf Life
12 months at room temperature.