Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Application Method
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Pot Life | 4 days | — | — |
| Conductivity | 5.5 | W/mK | — |
| Viscosity | 120000 | cps | — |
| Filler | Aluminum Nitride | — | — |
| Percent Filler (cured) | min. 75 | — | — |
| Volume Resistivity | max. 1X 10^16 | Q-cm | — |
| Dielectric Constant (1KHz) | 4.1 | — | — |
| Dielectric Constant (1MHz) | 3.9 | — | — |
| Dissipation Factor (1KHz) | 0.027 | — | — |
| Dissipation Factor (1MHz) | 0.038 | — | — |
| Useful Temperature Range | -55 to 230 | ºC | — |
| Thermal Stability | Good to 325 | °C | — |
| Lap Shear Strength | min. 800 | psi | — |
| Glass Transition Temperature (Tg) | 120 | °C | — |
| Coefficient of Thermal Expansion above Tg | 44 x 10^-6 | in./in./°C | — |
| Thermal Conductivity | min. 5.5 | W/m-K | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety & Handling
- Use with adequate ventilation.
- Keep away from sparks and open flames.
- Avoid prolonged contact with skin and breathing of vapors.
- Wash with soap and water to remove from skin.
Storage & Handling
- Shelf Life
- 6 months at -40°C, max. 4 days at 25°C
- Suggested Handling & Curing
Material is ready to use as received. Remove product from freezer and allow material to warm to room temperature before opening container. Best results are obtained when product is cured at one of the following schedules:
90 mins 80°C 15 mins 120°C 5 mins 150°C 45 sec 175°C