Products

Magris Talc EZ FLOW VT is a functional mineral used in the manufacture of paper, paints, ceramics, plastics, etc. It is mainly composed of talc (hydrous magnesium silicate), chlorite, dolomite, and magnesite. The product is odorless and has a white or off-white to light gray color.

Boratherm™ SA 0700 spherical alumina particles are made from a special fusion process using high-quality ground alumina material. Boratherm™ SA grades are used in various applications because of their high thermal conductivity, heat resistance, and low thermal expansion. Due to the sphericity of the particles and the possibility to combine grades, one can obtain very high packing densities, resulting in formulations with excellent thermal conduction while maintaining low viscosity and easy application.

Magris Talc HON-200R is a platy talc product that has undergone multi-stage separation treatment, including flotation, to remove carbonates and ensure a high degree of consistency. The particle size distribution, calcium, and iron levels are optimized for use in the manufacture of particulate filters for vehicle emission control systems. The HON-200R regular grade provides a lower-cost solution for vehicle emission control manufacturers with low levels of CaO and Fe2O3 impurities that enhance substrate performance.

Dar-Tech Portaryte® B50/10 is produced from carefully selected, very white, naturally occurring baryte. The standardized quality of Dar-Tech Portaryte® is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Fine grades of Dar-Tech Portaryte® fillers have been specially developed for powder coating applications. They are successfully used as an alternative for fine synthetic blanc fixe in high-gloss applications.

Magris Talc Galaxy 250 USP is a functional mineral that can be used in a range of applications such as industrial markets, food, and pharmaceuticals. Talc (hydrous magnesium silicate), chlorite, dolomite, and magnesite make up the majority of its composition. The product is odorless and has a white or off-white to light gray color.

Magris Talc HON-MT is a versatile functional mineral that finds its application in numerous industries such as paper, paints, ceramics, plastics, and others. Its composition is predominantly made up of talc (hydrous magnesium silicate), chlorite, dolomite, and magnesite. The product is characterized by its odorless nature and appears in a white or off-white to light gray color.

Magris Talc Grade TC-100 is an off-white, extremely platy talc product. It is used in joint compound formulas to improve resistance to cracking, smoothing, and sandability. Grade TC-100 is also used as a filler in modified asphalt roofing to improve weathering and UV resistance.

HIFILL® 3 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

Blachford Zinc Stearate SAK is a metallic stearate that can be used as a lubricant. It consists of fatty acids, unsaturated C8 and C18 and zinc salts. The product appears as a white to beige powder, granule, or flake with a slight odor.

Magris Talc HAR-002 is a versatile functional mineral that finds its application in numerous industries such as paper, paints, ceramics, plastics, and others. Its composition is predominantly made up of talc (hydrous magnesium silicate), chlorite, dolomite, and magnesite. The product is characterized by its odorless nature and appears in a white or off-white to light gray color.

Magris Talc Grade FG is a functional mineral used in the manufacture of paper, paints, ceramics, plastics, etc. It is mainly composed of talc (hydrous magnesium silicate), chlorite, dolomite, and magnesite. The product is odorless and has a white or off-white to light gray color.

Dar-Tech Portaryte® B4 is produced from carefully selected, very white, naturally occurring baryte. The standardized quality of Dar-Tech Portaryte® is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Fine grades of Dar-Tech Portaryte® fillers have been specially developed for powder coating applications. They are successfully used as an alternative for fine synthetic blanc fixe in high-gloss applications.

HIFILL® 5 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

Dar-Tech Portaryte® B45 is produced from carefully selected, very white, naturally occurring baryte. The standardized quality of Dar-Tech Portaryte® is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Fine grades of Dar-Tech Portaryte® fillers have been specially developed for powder coating applications. They are successfully used as an alternative for fine synthetic blanc fixe in high-gloss applications.

Dar-Tech Portaryte® B5 is produced from carefully selected, very white, naturally occurring baryte. The standardized quality of Dar-Tech Portaryte® is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Fine grades of Dar-Tech Portaryte® fillers have been specially developed for powder coating applications. They are successfully used as an alternative for fine synthetic blanc fixe in high-gloss applications.

HIFILL® Air Floated Clay Filler 17 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

Magris Talc Grade 25 Y is a functional mineral used in the manufacture of paper, paints, ceramics, plastics, etc. It is mainly composed of talc (hydrous magnesium silicate), chlorite, dolomite, and magnesite. The product is odorless and has a white or off-white to light gray color.

Magris Talc HON-C is a versatile functional mineral that finds its application in a multitude of industries including paper, paints, ceramics, plastics, and others. The product comprises primarily of talc (hydrous magnesium silicate), chlorite, dolomite, and magnesite. It has an odorless nature and appears in a white or off-white to light gray color.

HIFILL® 1 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® Air Floated Clay Filler 18 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

Dar-Tech Portaryte® C30 is produced from carefully selected, very white, naturally occurring baryte. The standardized quality of Dar-Tech Portaryte® C is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

HIFILL® 15 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

Magris Talc FDC is a high-purity, platy talc with 98% talc content. This product is used as a general-purpose coarse filler where high purity and low surface area are required.

Dar-Tech Portaryte® C15 is a natural barium sulfate that comes without any residual salts when compared to precipitated grades. This product is closely monitored, and the particle size is kept within a narrow variation. In addition, this natural baryte is easier to disperse than precipitated grades.

HIFILL® 10 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

Boratherm™ SA 0080 spherical alumina particles are made from a special fusion process using high-quality ground alumina material. Boratherm™ SA grades are used in various applications because of their high thermal conductivity, heat resistance, and low thermal expansion. Due to the sphericity of the particles and the possibility to combine grades, one can obtain very high packing densities, resulting in formulations with excellent thermal conduction while maintaining low viscosity and easy application.

HIFILL® Air Floated Clay Filler 15 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

Dar-Tech Portaryte® B3 is produced from carefully selected, very white, naturally occurring baryte. The standardized quality of Dar-Tech Portaryte® is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Fine grades of Dar-Tech Portaryte® fillers have been specially developed for powder coating applications. They are successfully used as an alternative for fine synthetic blanc fixe in high-gloss applications.

Boratherm™ GA6 S21.5 is submicron ground alumina produced by the calcination of carefully selected synthetic aluminum hydroxide (ATH). Boratherm™ GA grades are often used in combination with Boratherm™ SA and Boratherm™ SG grades in order to enhance a formulation’s particle packing and flow properties, resulting in improved thermal conductivity and stability (filler settling). Boratherm™ GA6 S21.5 is the surface-modified (1.5 % w/w coated) version of Boratherm™ GA6, a submicron ground alumina tailored to improve the stability of thermally conductive uncured polymeric composites. Changes in type of treatment and loading level are possible to meet your specific requirements. To guarantee a consistent product quality for the Boratherm™ GA grades, the chemical composition of the raw materials, the product particle size of the final products, and the treatment process (in the case of the Boratherm™ GA6 S21.5) are closely monitored and kept within a narrow variation.

Dar-Tech Portaryte® D15 is produced from carefully selected, naturally occurring off-white baryte. Dar-Tech Portaryte® D is successfully used in applications where excellent chemical inertness is required but high brightness and consistent color are less important, e.g., primers, sealants, and adhesives. The exceptionally high density of baryte makes Dar-Tech Portaryte® D an economical filler of choice for sound deadening in automotive and domestic applications (e.g. sewer pipes). The quality of Dar-Tech Portaryte® D is guaranteed by an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Dar-Tech Portaryte® B25 is produced from carefully selected, very white, naturally occurring baryte. The standardized quality of Dar-Tech Portaryte® is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Fine grades of Dar-Tech Portaryte® fillers have been specially developed for powder coating applications. They are successfully used as an alternative for fine synthetic blanc fixe in high-gloss applications.

HIFILL® 18 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

Magris Talc Glacier 400 USP-FCC is a high-purity talc product designed for use in food, chewing gum, nutraceutical, and personal care applications. It is produced from a high-purity US talc ore source and is further beneficiated to keep the levels of non-talc minerals such as carbonates and chlorites to a minimum.

HIFILL® 2 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

Magris Talc HON-350 is a high-purity, platy talc. Magris Talc HON-350 has been mineralogically floated to remove carbonates, ensuring a high degree of consistency. The particle size distribution and calcium level are optimized for use in the manufacture of ceramic diesel particulate filters for vehicle emission control systems.

Dar-Tech Portaryte® D50 is produced from carefully selected, naturally occurring off-white baryte. Dar-Tech Portaryte® D is successfully used in applications where excellent chemical inertness is required but high brightness and consistent color are less important, e.g., primers, sealants, and adhesives. The exceptionally high density of baryte makes Dar-Tech Portaryte® D an economical filler of choice for sound deadening in automotive and domestic applications (e.g. sewer pipes). The quality of Dar-Tech Portaryte® D is guaranteed by an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.