Products

DeCAL 2042 is a low viscosity product used to disperse inorganic pigments and fillers in waterborne systems. It is especially suited for use in silk and gloss emulsion paints where its compatibility with glycols maintains the gloss of the system.

Syntran® PA-1465 is based on a patented acrylic-olefin graft technology. This unique incorporation of olefin onto the backbone of the acrylic increases the wear resistance and stability of the formulation without sacrificing the burnishability of the wax when used in a floor finish.

Syntran® PA-1475 is based on a patented acrylic-olefin graft technology. This unique incorporation of olefin onto the backbone of the acrylic increases the wear resistance and stability of the formulation without sacrificing the burnishability of the wax when used in a floor finish.

Dar-Tech Hauthane L-3529 is a solvent-free, flexible, aliphatic, polycarbonate-polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant, or impregnating agent. It may be blended with L-3528 to increase hardness. This grade can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. It may be thickened with associative thickeners for knife-over-rolling or similar methods.

Nicron® 302 is a high-purity, 3-Hegman microcrystalline talc product with low oil adsorption and minimal viscosity build. Nicron® 302 is part of the Engineered Series of Magris Talc products that have unique particle size distributions for improved paint performance properties. Nicron® 302 is an excellent choice for protective coating applications due to its hydrophobic nature, very low mineral solubility, and proven anti-corrosion performance. Nicron® 302 disperses easily in high-solids and solventborne coatings and gives very good paint stability, rheology, and anti-settling properties.

Syntran® 6211 is based on high-solids technology. This technology creates a film with very high flexibility, excellent water resistance, and excellent coverage. This technology also allows for excellent adhesion over multiple substrate types. This white emulsion is used in interior and exterior paints and concrete primers.

DeCAL 4040 is a self-crosslinking resin for direct-to-metal coatings, a universal thermoplastic Styrene/Acrylic copolymer in emulsion form offering enhanced flexibility, high water resistance, and excellent pigment binding power, adhesion, and gloss. DeCAL 4040 offers good block resistance, good compatibility with associative thickeners, and fast drying.

Syntran® PA-1445 is based on a patented acrylic-olefin graft technology. This unique incorporation of olefin onto the backbone of the acrylic increases the wear resistance and stability of the formulation without sacrificing the burnishability of the wax when used in a floor finish.

Nicron® 503 is a high purity, 5-Hegman microcrystalline talc product with minimal viscosity build. Nicron® 503 is part of the Engineered Series of Magris Talc products that offer unique particle size distributions for improved paint performance properties. Nicron® 503 is an excellent choice for modern protective coating applications due to its hydrophobic nature, very low mineral solubility, and proven anti-corrosion performance. Nicron® 503 disperses easily in high-solids and solventborne coatings and gives very good paint stability, rheology, and anti-settling properties.

PerformaSil™ 100 SWBE provides superior application, clean-up, functionality, and a sustainability factor that the entire formulation and manufacturing pipeline benefits from, including additive manufacturers, coating manufacturers, coating application contractors, end-users, and ultimately the environment. This product can be used in the formulation of ambient cure or bake coatings for a wide range of substrates such as masonry, glass, leather, fabric, textiles, and metals. It exhibits outstanding weather, water, and solvent resistance making it an excellent candidate for exterior coatings in harsh weather conditions.

Dar-Tech Hauthane HD-2107 DMM is a hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. This product is a balance of toughness, abrasion resistance, and mar resistance, designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic, and wood.

DeCAL PS 14 rheology modifier allows the paint formulator to adjust medium and high shear viscosities to improve tool load, film build and brush drag. In order to obtain the best balance of flow and sag resistance it can be used in combination with other thickeners, of natural or synthetic origins.

Dar-Tech Hauthane HD-4675 is a hard, co-solvent-free, aliphatic polyester polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic, and wood. This grade can be used as supplied or blended with acrylic emulsions for spray, dip, or rotogravure applications. It can be thickened with associative thickeners for knife-over-rolling or similar methods.

Mistron® Monomix is a high-purity, high-brightness, 6-Hegman micronized microcrystalline talc product. Mistron® Monomix is part of the micronized series of Magris Talc products that have a high surface area and tight top-size control for improved paint performance properties. This product has very good coating stability and anti-settling properties.

Syntran® 6209 is based on high-solids technology. This technology creates a film with very high flexibility, excellent water resistance, and excellent coverage. This technology also allows for excellent adhesion over multiple substrate types. This white emulsion is used in adhesives, textile and leather coatings, pigmented coatings and sealants, label, board, and packaging coatings (OPV).

DeCAL 2045 is a hydrophobic dispersant used to disperse inorganic pigments and fillers in water borne systems. It is especially recommended for reactive pigment grades and is also ideally suited for systems whereby improvements in water resistance are required, such as aqueous paints, coatings and adhesives.

DeCAL 9160 is an efficient zirconium-based crosslinker for water-based coatings. Due to its crosslinking capacity, DeCAL 9160 can improve the bonding power and strength of dried coatings. It is mainly used in combination with CMC, oxidized starch, proteins, SBR latexes, and acrylic binders.

Dar-Tech Hauthane HD-4669 is a hard, co-solvent-free, aliphatic, aqueous polyurethane dispersion. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic, and wood. This grade can be used as a sole vehicle or blended with acrylic emulsions for spray, dip, or rotogravure applications. It may be thickened with associative thickeners for alternative application methods.

Dar-Tech Hauthane HD-2101 is a soft, aliphatic, polyester-based, aqueous polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant, or impregnate. HD-2101 can be used as a sole vehicle or blended with harder polyurethane dispersions or acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods.

DeCAL 9521 is a specially designed dust suppressant for use on all mineral stockpiles, preventing the creation of windborne dust and protecting the environment while saving valuable minerals. It is water-resistant, preventing channeling and slumping of the stockpile due to rainfall. DeCAL 9521 can also be sprayed onto haulage roads to prevent the creation of dust.

Mistron® Vapor R is a high-purity microcrystalline talc. Mistron® Vapor R is designed for use in thermoset rubber, coatings, and adhesive and sealant formulations. Mistron® Vapor R balances reinforcement with processability, providing lower compound viscosity, improving extrusion quality and rate, and reducing die swell and nerve. Mistron® Vapor R improves impermeability, swell resistance, and the aging properties of thermoset rubber compounds. In coatings, Mistron® Vapor R also enhances final film performance by increasing tensile strength and flexibility. Mistron® Vapor R has a platy, hydrophobic characteristic which improves barrier properties, corrosion resistance and stain blocking ability.

Syntran® 1658 is based on a proprietary film-forming polymer technology. This technology provides excellent adhesion to multiple substrates, enhances pigment dispersion, and improves the properties of cohesion, gloss, flexibility, and water resistance. This white to light tan emulsion is used in flexible and adhesive coatings.

ACCESS® B-TF is a silicone-based release agent designed to prevent sticking between surfaces during processing, particularly useful for mold release in the production of rubber and plastic parts. ACCESS B-TF serves as a co-binder in silicone resin coatings. Formulated silicone resin coatings are highly water-repellent and they exhibit high water vapor permeability. Due to its resistance to alkalis, ACCESS B-TF can be used in sodium-silicate-containing coatings and sealers.

AFCONA 4597 is a high molecular weight polymeric dispersant that is ideal for use in water-based decorative and industrial paints. It prevents negative flocculation effects, such as flooding and floating, while also improving storage stability. It is particularly effective for producing water-based, resin-free pigment concentrates.

Syntran® AC 9073 is based on Interpolymer Corporation's proprietary self-crosslinking technology. This technology combines two distinct crosslinking mechanisms on the same polymer backbone, significantly increasing chemical, stain, and water resistance. This technology was designed for the self-crosslinking mechanism to fully cure at room temperature while maintaining long-term shelf stability.

Dar-Tech Hauthane HD-2501 is a soft, aliphatic, polycarbonate-based, polyurethane dispersion. It was designed primarily for use on flexible substrates as a coating, saturant, or impregnate. This grade can be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. It may be thickened with associative thickeners for knife-over-rolling or similar methods.

Mistron® RCS is a very high-purity, high-brightness 5½-Hegman talc product with low oil adsorption and minimal viscosity build. Mistron® RCS is part of the Engineered Series of Magris Talc products that have unique particle size distributions for improved paint performance properties. Mistron® RCS is an excellent choice for modern protective coating applications due to its hydrophobic nature, very low mineral solubility, and proven anti-corrosion performance.

DeCAL DeCAL 1105+ is a new acrylic copolymer emulsion in water. This medium molecular weight hydrophobic polymer provides a rheological control effect through extensive swelling and association in alkaline conditions, providing film building and leveling. For interior and exterior matte and semi-gloss paints, this product improves flow and leveling performance, sag resistance, and anti-settling. It also results in much less spattering in paints applied by roller.

Nicron® 402 is a high-purity, 4-Hegman microcrystalline talc product with low oil adsorption and minimal viscosity build. Nicron® 402 is part of the Engineered Series of Imerys Talc products that have unique particle size distributions for improved paint performance properties. Nicron® 402 is an excellent choice for modern protective coating applications due to its hydrophobic nature, very low mineral solubility, and proven anti-corrosion performance. Nicron® 402 disperses easily in high-solids and solventborne coatings and gives very good paint stability, rheology, and anti-settling properties.

Decal 2045+ is a concentrated, hydrophobic dispersion used to disperse inorganic fillers and pigments in waterborne systems. DeCAL 2045+ is the sodium salt of a carboxylic acid polymer in water, developed with a higher concentration and improved efficiency. Compared to DeCAL 2045, dosages can be reduced by up to 40% while still maintaining performance. It is recommended for reactive pigment grades and is ideally suited for systems where improvements in water resistance, wet scrub resistance, and blocking resistance are required.

Dar-Tech Hauthane HD-2107 is an aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties such as extreme toughness, abrasion resistance, and mar resistance. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic, and wood.

DeCAL 2040A is a derivative of a family of highly effective, low viscosity dispersing agents for waterborne systems. The product is especially suited for the dispersion of inorganic fillers and pigments. DeCAL 2040A is a solution of the sodium salt of an acrylic polymer in water.

Syntran® 3104 is based on a proprietary film-forming polymer technology. This technology provides excellent adhesion to multiple substrates, enhances pigment dispersion, and improves the properties of cohesion, gloss, flexibility, and water resistance. This white emulsion is used in flexible and adhesive coatings.

AFCONA 3522 is an additive to improve the surface characteristics of waterbased coatings. It is a waterbased emulsion of an organically modified polysiloxane, with the active ingredient being a hydrophobic polymer that gives water resistance and slip performance to the coating after drying. This product also offers low foam stabilization. AFCONA 3522 is recommended for use in all types of waterbased coatings.

DCL 1816 Dianisidine Orange, PO.16 is a blue-shade Dianisidine Orange pigment designed for non-exterior film, blow molding, injection molding, and wire and cable applications. It offers very good heat stability up to 240°C and has a high tint strength compared to other orange color indices. DCC 1816 is considered to be the most cost-effective lead-free alternative to molybdate orange.

DCL 1624 Molybdate Orange, PR.104 is a standard yellow shade molybdate orange pigment. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a highly reliable and versatile choice for a wide range of coating and plastic applications.