Products

AEROSIL® R 812 S is hydrophobic fumed silica grade treated with HMDS (Hexamethyldisilazane). It is even more hydrophobic than AEROSIL® R 812 and convenient for stabilizing a defoamer and well suitable as a component of foam control agents.

SIPERNAT® 22 LS is a very finely milled, hydrophilic silica. It is primarily used as a free-flow agent in other applications.

AEROSIL® R 208 is a fumed silica aftertreated with polydimethylsiloxane with excellent thickening properties.

AEROSIL® 200 HV is a hydrophilic fumed silica with a specific surface area of 200 m²/g.

AEROSIL® R 974 is hydrophobic fumed silica grades treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recommended for improving the sedimentation stability of defoamer dispersions as well.

AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g.

AEROSIL® R 8200 is a structure modified hydrophobic silica grade treated with HMDS (Hexamethyldisilazane). It is characterized by an extremely low thickening effect and high compacted bulk density. Its high hydrophobicity makes it suitable as a defoamer silica.

AEROSIL® 130 is a fumed silica with a high specific surface area, making it an excellent thickening and reinforcing agent for a wide range of applications. This product is particularly well-suited for use in adhesives, coatings, and composites, as it can improve mechanical strength and increase the durability of the final product. AEROSIL® 130 is a hydrophilic fumed silica with a specific surface area of 130 m2/g.

AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g.

AEROSIL® R 972 is hydrophobic fumed silica grade treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recomended for improving the sedimentation stability of defoamer dispersions as well.

AEROSIL® R 202 is a hydrophobic fumed silica grade, treated with a polydimethylsiloxane. This product can be used in defoamer formulations for sedimentation stabilization and due to its high hydrophobicity as defoaming component.

SIPERNAT® 35 is a very finely milled, hydrophilic, slightly alkaline silica, used in dry roast hydrophobized defoamer formulations.

AEROXIDE® Alu C 805 is a fine-particulate, fumed aluminum oxide (Al₂O₃) that is highly hydrophobized with an organosilane.

AEROSIL® R 106 is a hydrophobic fumed silica after treated with D4 (Octamethylcyclotetrasiloxane).

AEROSIL® R 805 is a high thickening fumed silica surface treated with OCTMO.

AEROSIL® R 816 fumed silica powder offers an alternative technology to stabilize oil/water emulsions. Due to the special surface modification of the silica both hydrophilic and hydrophobic properties are introduced in just one material. This enables AEROSIL® R 816 to enrich at oil/water interfaces and thereby stabilize oil droplets in a continuous water phase by the Pickering effect.Furthermore, AEROSIL® R 816 brings structure to the continuous water phase and increases its viscosity which limits the mobility of the oil droplets, thereby providing for even more emulsion stability.

AEROSIL® R 812 is hydrophobic fumed silica grade treated with HMDS (Hexamethyldisilazane). It can be used for sedimentation stabilization and due to its high hydrophobicity as defoaming agent.

AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g.