Products

Tarnoform® 300 GB2 there is 10% glass beads filled injection-molding grade - increased stiffness and hardness with reduced shrinkage.

Poliamid 6 impact modified grade. ISO 1874-1: PA 6-HI, MR, 14-020

Grupa Azoty S.A Tarnoform® 300 GF3 is a 15% glass fibers reinforced injection-molding grade with increased strength and stiffness and reduced shrinkage and coefficient of linear thermal expansion.

Grupa Azoty S.A Tarnoform® 300 GF4 is a 20% glass fibers reinforced injection-molding grade with high strength and stiffness and reduced shrinkage and coefficient of linear thermal expansion.

Tarnamid® T- 27 MT 20 is a 20% mineral filled polyamide 6 compound, heat stabilized.

It is low-medium viscosity general purpose polyamide 6, containing release agent. ISO 1874-1: PA 6, MR, 14-030N

It is flame retarded polyamide 6 compound, halogen and phosphorous free, good electrical properties. ISO 1874-1: PA 6, MFR, 14-040

Tarnamid® T- 27 GF25 FRV0 is a polyamide 6 containing 30% glass reinforced, heat stabilized, flame retardant.

Grade with lowered wear and friction coefficient modified with PTFE ISO 9988-1: POM-K, M-GNS2, 03-002

Easy flowing grade, lowered viscosity ISO 9988-1: POM-K, M-GNR, 04-002

Grupa Azoty S.A Tarnoform® 300 SI is an Acetal (POM) Copolymer material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Tarnoform® 300 SI are: Flame Rated Chemical Resistant Bacteria Resistant Copolymer Fatigue Resistant Typical applications include: Engineering/Industrial Parts Automotive Plumbing/Piping/Potable Water

It is low-medium viscosity general purpose polyamide 6, containing release agent and colorant. ISO 1874-1: PA 6, MC2R, 14-030

Tarnamid® T-27 GF30TF15 is tribological modified grade, which cause decrease coefficient of friction and wear. ISO 1874-1: PA 6, MHR, 14-090, GF30Z15

Tarnamid® T- 27 MT 30 is a 30% mineral filled polyamide 6 compound, heat stabilized.

It is high viscosity general purpose polyamide 6, containing release agent. ISO 1874-1: PA 6, M2R, 22-030N

Tarnamid® T-27 G is tribological modified grade, which cause decrease coefficient of friction and wear. ISO 1874-1: PA 6, MHR, 14-090, Z

Tarnamid® T-27 GF 15 is a 15% glass fiber reinforced polyamide 6 compound.It can be processed using injection molding.

Tarnamid® T-27 GF25M is tribological modified grade, which cause decrease coefficient of friction and wear. ISO 1874-1: PA 6, MHR, 14-080, GF25Z

Tarnamid® T-27 GF25 MT15 is a 25% glass fibers and 15% mineral filled polyamide 6 compound, heat stabilized.

Grupa Azoty S.A Tarnoform® 300 GF2 is a 10% glass fibers reinforced injection-molding grade with increased strength and stiffness and reduced shrinkage and coefficient of linear thermal expansion.

Grupa Azoty S.A Tarnoform® 300 GF5 is a 25% glass fibers reinforced injection-molding grade with high strength and stiffness and reduced shrinkage and coefficient of linear thermal expansion.

Tarnamid® T-27 GF 35 is a 35% glass fiber reinforced polyamide 6 compound.It can be processed using injection molding.

Tarnamid® T-27 GF 30 is a 30% glass fiber reinforced polyamide 6 compound.It can be processed using injection molding.

Tarnamid® T-27 TF10 is tribological modified grade, for better sliding properties in plastic-plastic content. ISO 1874-1: PA 6, MHR, 14-090,Z

Tarnamid® T-27 MT40 natur NT 408 by Grupa Azoty S.A is commonly used as Molding Resin for a variety of applications in Automotive. It is available in Granules form.

Easy flowing grade, lowered viscosity, increased strength and heat resistance ISO 9988-1: POM-K, M-GNR, 04-002

Tarnamid® T-27 GF 40I is a 40% glass fiber reinforced and impact modified polyamide 6 compoundIt can be processed using injection molding.

Tarnoform® 300 GF4 TF3 is a polyacetal copolymer (pom) polymer lowered wear and friction coefficient modified with 20% glass fibers reinforced.

Poliamid 6 impact modified grade. ISO 1874-1: PA 6-HI, MR, 14-020

Tarnamid® T-27 GF 50 is a 50% glass fiber reinforced polyamide 6 compound.It can be processed using injection molding.

Tarnamid® T- 27 MW 30 is a 30% mineral filled polyamide 6 compound, heat stabilized.

Tarnamid® T-27 GF 10 is a 10% glass fiber reinforced polyamide 6 compound.It can be processed using injection molding.

Tarnoform® 300 GF6 TF3 is a polyacetal copolymer (pom) polymer lowered wear and friction coefficient modified with 30% glass fibers reinforced.

Tarnamid® T-27 GF 150 is a 50% glass fiber reinforced polyamide 6 compoundIt can be processed using injection molding.

Tarnamid® T-27 MTR there is translucent polyamide 6, with limited translucency up to maximum 2,5 mm of parts wall thickness. ISO 1874-1: PA 6, MT, 14-030

Impact modified.