Products

Hernon ReAct® 727 is a tough acrylic adhesive designed primarily for securing of ceramic permanent magnet segments in motor magnet bonding applications. This adhesive has also found wide acceptance in a variety of structural bonding applications due to its versatile performance capabilities. ReAct® 727 has demonstrated the ability to provide high tensile strength while maintaining excellent product flexibility. This results in tough, durable bonds with outstanding impact and peel resistance. This tough acrylic is a room temperature curing adhesive which is used in conjunction with Hernon® Activator 56.

Hernon HASA® 716 is a single component structural anaerobic adhesive formulated for bonding rigid assemblies at high temperatures. HASA® 716 cures when it is confined between mating surfaces. Hernon® Primer 50 accelerates the cure.

Hernon ReAct® 766 is a tough acrylic adhesive designed primarily for bonding permanent magnets. ReAct® 766 has also found wide acceptance in a variety of structural bonding applications due to its versatile performance capabilities. ReAct® 766 provides high tensile strength while maintaining excellent product flexibility. This results in tough durable bonds with outstanding impact and pee1 resistance. Temperature resistance from –40ºC (-40ºF) to 204ºC (400ºF). ReAct® 766 is a single component adhesive used in combination with Hernon® Activator 59 or Activator 63 for curing at room temperature. The adhesive may also be heat cured at 150ºC.

Hernon Tuffbond® 302 is a modified epoxy adhesive that provides a very fast room temperature cure. Tuffbond® 302 exhibits very good moisture chemical and heat resistance. This very fast cure epoxy adhesive is specially formulated for rapid in-line assembly of loud speakers. Tuffbond® 302 is also recommended for bonding metals, wood, ceramics, etc., and can be used for potting and encapsulation of electrical and electronic components.

Hernon Tuffbond® 305 is a modified epoxy adhesive that provides a very fast room temperature cure. Tuffbond® 305 exhibits very good moisture chemical and heat resistance. This very fast cure epoxy adhesive is specially formulated for rapid in-line assembly of loud speakers. Tuffbond® 305 is also recommended for bonding metals, wood, ceramics, etc., and can be used for potting and encapsulation of electrical and electronic components.

Hernon Tuffbond® 304 is a modified epoxy adhesive that provides a very fast room temperature cure. Tuffbond® 304 exhibits very good moisture chemical and heat resistance. This very fast cure epoxy adhesive is specially formulated for rapid in-line assembly of loud speakers. Tuffbond® 304 is also recommended for bonding metals, wood, ceramics, etc., and can be used for potting and encapsulation of electrical and electronic components.

Hernon ReAct® 761 is a tough acrylic adhesive designed primarily for bonding permanent magnets. ReAct® 761 has also found wide acceptance in a variety of structural bonding applications due to its versatile performance capabilities. ReAct® 761 provides high tensile strength while maintaining excellent product flexibility. This results in tough durable bonds with outstanding impact and peel resistance. ReAct® 761 is a single component adhesive used in combination with Hernon® Activator 59, Activator 56 or Activator 63 for curing at room temperature. The adhesive may also be heat cured at 150ºC.

Hernon ReAct® 730 is a high strength non-flammable structural adhesive. This adhesive provides a resilient and rapid cure at room temperature when used with Hernon® Activator 56 or Activator 59. ReAct® 730 will provide high strength bonds on a variety of metals, ceramics, glass, and some plastics.

Hernon HASA® 722 is a single-component, anaerobic, structural adhesive designed for bonding rigid assemblies. HASA® 722 cure is accomplished when mating surfaces including metal, glass and ceramics are joined together. Accelerated cures are possible with the application of primers or by a short, low temperature heat cycle. Upon cure, HASA® 722 is a highly crosslinked thermoset plastic with excellent properties over a wide range of conditions.

Hernon Fusionbond® 373 is a two component, room temperature curing, 10:1 ratio, methacrylate adhesive system. This adhesive is low halogen and phthalate-free. Fusionbond® 373 forms resilient bonds and maintains its strength over a wide range of temperatures. Fusionbond® 373 is suitable for bonding a variety of substrates with a minimum of surface preparation. Recommended substrates: PVC, acrylic, ABS, stainless steel, aluminum and some types of fiberglass. Fusionbond373 provides toughness at temperatures from -67 to 250°F.

Hernon Fusionbond® 372 is a two component, room temperature curing, 1:1 ratio, methacrylate adhesive system. Fusionbond® 372 is formulated to provide fixturing strength within 10 to 15 minutes. This adhesive is Halogen free. Fusionbond® 372 forms resilient bonds and maintains its strength over a wide range of temperatures. Fusionbond® 372 is suitable for bonding a variety of substrates with a minimum of surface preparation. Recommended substrates: PVC, acrylic, ABS, stainless steel, aluminum and some types of fiberglass.

Hernon Fusionbond® 370 is a two components methacrylate adhesive. It is specially formulated for structural bonding of thermoplastics, metal, wood and composite assemblies. Fusionbond® 370 is an excellent choice for composite bonding applications in the marine, automotive and construction industries because it requires virtually no surface preparation. Fusionbond® 370 provides superior toughness at temperatures from -67 to 250°F.

Hernon Fusionbond® 381 is a two components methacrylate adhesive. It is specially formulated for structural bonding of thermoplastics, metal, wood, and composite assemblies. Fusionbond® 381 is an excellent choice for composite bonding applications in the marine, automotive and construction industries because it requires virtually no surface preparation. Fusionbond® 381 provides toughness at temperatures from -67 to 250°F.

Hernon Fusionbond® 371 is a two components methacrylate adhesive. It is specially formulated for structural bonding of thermoplastics, metal, wood and composite assemblies. Fusionbond® 371 is an excellent choice for composite bonding applications in the marine, automotive and construction industries because it requires virtually no surface preparation. Fusionbond® 371 provides toughness at temperatures from -67 to 250°F.

Hernon Fusionbond® 378 is a non-sag two component methacrylate adhesive. Fusionbond® 378 is an excellent choice for composite bonding applications in the marine, automotive and construction industries because it requires virtually no surface preparation. Fusionbond® 378 provides superior toughness at temperatures from -40 to 250°F.