Products

RTV167 adhesive sealants from Momentive Performance Materials are one-component, ready-to-use electronic grade silicone sealants. They cure to a tough, resilient silicone rubber on exposure to atmospheric moisture at room temperature. These electronic-grade silicone adhesive sealants differ somewhat in physical properties including consistency.

8810 urethane resin is a black, tough, 2-part potting compound. It features a low mixed viscosity and excellent moisture resistance. In addition, this rigid urethane potting compound adheres strongly to a wide variety of substrates, including metals, composites, glass, ceramics, and many plastics. This 2-part polyurethane resin offers exceptional physical protection and is designed for potting and encapsulating intricate electronic components and cable jointing boxes.

High Temperature Rigid Urethane 8820 is a black, tough, high temperature, two-part polyurethane potting compound. It has a low mixed viscosity and properties similar to epoxy compounds, but with exceptional low temperature stability. As well, it adheres strongly to a wide variety of substrates, including metals, composites, glass, ceramics, and many plastics. 8820 offers exceptional physical protection, a high continuous operating temperature, and superior protection from acids, bases, and many organic solvents.

RTV5810 series sealants are neutral cure, one-component, ready-to-use silicone adhesive sealants that cure to tough resilient silicone rubber on exposure to atmospheric moisture at room temperature. These sealants are fast curing, paste consistency products that may be considered for use where quick initial adhesion build is desired. This may allow for movement of the sealed assemblies in a shorter period of time, increasing productivity.

8329TCS is a 2-part, heat-cure, thermally conductive epoxy adhesive with a 4-hour working time. It is a dark gray, smooth, thixotropic paste that cures to form a hard, durable polymer that is thermally conductive, yet electrically insulating. This thermal adhesive is used to glue heat sinks to LEDs, CPUs and other heat-generating components. 8329TCS has been designed for maximum thermal conductivity. It is highly viscous and must be mixed by hand prior to application. For a lower viscosity, use 8329TFS. For a shorter working time, use 8329TCM.

8329TCM is a 2-part thermally conductive epoxy adhesive. It is a dark gray, smooth, thixotropic paste that cures to form a hard, durable polymer that is thermally conductive, yet electrically insulating. This adhesive is most often used as heatsink glue, attaching heatsinks to CPUs, LEDs, or other heat generating electronics components. This compound has been formulated for high thermal conductivity. It is highly viscous and must be mixed by hand prior to application. For a lower viscosity use 8349TFM. For a shorter working time, use 8349TFM. For a longer working time, use 8329TCS.

9410 is a 1-part electrically conductive epoxy adhesive. It has unlimited working time at room temperature. It bonds well to a wide variety of substrates, and offers strong chemical resistance. 9410 is designed for semi-conductor flip chip packaging as well as die attach for small chips, LEDs and diodes. It provides excellent EMI/RFI shielding and is very effective at filling in seams between metal plates. It can be readily used in manual, pneumatic and robotic dispensing processes.

RTV108 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. RTV102, RTV103, RTV106, RTV108, RTV109, RTV112, RTV116 and RTV118 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. Since all these sealants utilize a moisture cure system, they must not be used in thicknesses of greater than 6mm (1/4 in.). Where section depths exceed 6mm (1/4 in.), Momentive Performance Materials one component, addition cure or two-component silicone rubber compounds are recommended.

SS4155 Ready to use, silicone primer for use with one and two part room temperature or heat cured RTV silicone compounds to bind to metals, ceramics, some rigid plastics and wood. Blue color makes easy visual determination of uniform coating.

The 4352 Thinner 2 is a moderately fast drying thinner for use with MG Chemical’s conformal products. It is compatible with film forming paint products with acrylic, alkyd, cellulose acetate butyrate, epoxy, nitrocellulose, or polyester resins. Together with these type of resin systems, the 4352 thinner promotes good flow properties and suppresses blushing.

8463 is a silver-filled electrically conductive grease. It greatly improves electrical and thermal connections under screw-type pressure. It lubricates, reduces contact resistance, repels moisture, inhibits corrosion, and prevents static build-up. Use 8463 when you want a lubricating grease that provides superior electrical contact and environmental protection. It is excellent for ground connections, rotating connections, rotary switches, variable capacitors, roller inductors, roller bearings, slip rings, slide connectors and potentiometers.

The 4351 Thinner 1 is a mild diluent designed for MG Chemical’s EMI/RFI shielding products.

The 4354 Thinner 4 is a slower drying thinner for use with the MG Chemical’s urethane and acrylic conformal products. The thinner as excellent solvent strength, making it a good oil and grease remover. It has very low water solubility, so it is unlikely to absorb water and create blush. Its drying speed is slow enough to promote excellent leveling, but it is fast enough to accommodate a reasonable assembly line speed.

The 434 Acetone is an ACS grade, super-fast drying, VOC-exempt, zero-residue solvent. The fast evaporation rate of the 434 makes it a good thinner choice for spray application that require quicker drying times.

8461 is a general-purpose lithium grease with a smooth, buttery texture. It is a corrosion-resistant lubricant for metal-to-metal, metal-to-plastic, and plastic-to-plastic applications. 8461 is useful for lubricating 3D printer mechanisms, gears, spindles, hinges, latches, tracks, pulleys, cables, machinery, tools, and equipment.

The 4353 Thinner 3 is a moderate speed drying thinner for use with the MG Chemical’s conformal coating products. The thinner promotes good flow properties and suppresses blushing.

The 433C d-Limonene is an industrial grade solvent. It is a biodegradable product with a pleasant odor.

The 415 Ferric Chloride is an etchant solution for printed circuit board and photoengraving processes.

SS4120 - Primer SS4120 is a primer that is formulated for use with Momentive Performance Materials RTV silicone rubber adhesive sealants. Momentive Performance Materials one-component products offer primerless adhesion to many substrates. Primers are used to help promote adhesion to difficult-to-bond substrates. For most Momentive Performance Materials two-component products, a primer is required when an adhesive bond is needed between the silicone rubber compound and a non-silicone surface. All primers are one-component products requiring no mixing and are supplied ready-to-use as easily pourable solvent solutions. SS4120 primer helps promote adhesion of Momentive Performance Materials addition cure RTVs and is used where clarity is needed.

The 410 Ammonium Persulphate is a copper etchant compound used as an alternative to the traditional ferric chloride to produce a cleaner copper etchant solution. One kilogram of ammonium persulfate will produce four liters of etching solution when mixed with water.

PLA is the most popular resin for 3D printing because it is easy to use and has almost no odor. It adheres well to masking tape without requiring a heated printing bed or noxious solvents. It is an optimal choice for homes, schools and laboratories, and has many commercial applications. MG Chemicals premium 3D printing filaments are manufactured under strict quality control to ensure consistency. Our spools have a large hub to ensure uniform winding, and cut-outs on the sides so the user can easily see how much filament is left.

The 402A Super Duster™ 134 is a pure, non-flammable duster that can be used on live electronic and electrical equipment. The duster contains pure 1,1,1,2-tetrafluoroethane (HFC 134a), which delivers a constant, high-pressure cleaning jet. The gas jet is dry, low-residue, and chemically inert, which makes it safe for cleaning electrical and electronic components. The 402A duster is ideal for removing lint, dust, and other debris from printed circuit boards, electronic devices, and computers. It helps prevent malfunctions and lengthens component life.