Products

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications. FeaturesPolymer-type epoxy resin with epoxy functional groups at the both endsHigh molecular weightHigh softening points Good adhesionApplicationsPCM, CAN and other coatingsPaintThermoplastics Printed electronics Plastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jER™ YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SymaLITE is a special class of lightweight composites that offer low thermal expansion and exceptional mechanical and physical properties. Made from mixed glass and polymer fiber fleeces, SymaLITE is available in rolls and boards, which can be further molded into three-dimensional components using low-pressure molding.Features:Low thermal expansionExcellent mechanical and physical propertiesUltra-light and freely shapeableNoise-absorbentDirect facing with functional or decorative cover layers without adhesivesBenefits:Cost-efficient production of three-dimensional componentsDurable and noise-insulating material for car undershields and engine coversImpact-resistant and non-weathering for outdoor applications in the automotive and construction industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.Applications:Automotive and caravan industryConstruction sectorCar headlinersOutdoor applications in the automotive and caravan industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.

GMTex® is a high-performance thermoplastic composite material that has been developed for applications requiring exceptional impact resistance, strength, and durability. Made from a polypropylene or polyamide resin matrix reinforced with both woven and randomly laid fibers, these moldable panels are favored as lightweight, high-performance replacements for steel, aluminum, magnesium, and other industrial materials, or alternatively as additional reinforcement for GMT panels.Features:High impact resistanceExceptional strength and durabilityLightweightMulti-layer glass fiber weave technologyReinforced with both woven and randomly laid fibersBenefits:Can replace traditional industrial materials like steel, aluminum, and magnesiumCan be used as an additional reinforcement for GMT panelsIdeal for use in structural vehicle components, such as front ends and bumper bracketsCan withstand high pressure and velocity conditionsApplications:Structural vehicle components, such as front ends and bumper bracketsIndustrial and manufacturing applications that require high impact resistance, strength, and durabilityAdditional reinforcement for GMT panels in various applications

DIACARNA™ 30M is a copolymer of α-olefin and maleic anhydride. Applications include as a compounding additive for filler dispersant and adhesion promoter for PA/GF composites.

Mitsubishi Chemical Advanced Materials is considered the world market leader in the production of classic glass-mat-reinforced thermoplastics (GMT). This semi-finished product in panel form was developed primarily as a substitute for metals (steel, aluminum etc.) and its main purchasers can be found in the automotive industry. This is where it is frequently pressed on the industrial scale into complex 3D structural components, although it is also used as panels.