Products

DIACRON™ ER-502 is a polyester resin with excellent solvent solubility. It is a high acid value and high molecular weight (Mw)-grade and is optimal as a binder for paints and inks due to its excellent pigment dispersibility. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Low temperature fusion Excellent metal adhesion Excellent pigment dispersion Can be used with cross-linking agents   Benefits: Solvent solubility High solid differentiation Use of biomass raw materials   Applications: PCM coatings For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-3399 is a polyester resin under development can be used for powder coating. It works well to keep color for a long time and has excellent mechanical strength by using curing agents such as TGIC and Primid (HAA) and Epoxy resins.   Features: Excellent chemical and weather resistance Excellent pigment dispersion Good mechanical strength Can be used with cross-linking agents   Benefits: Good heat resistance Durability High solid differentiation   Applications: Powder Coating For various types of inks Solventborne adhesive   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UT-7792 is a bio-based urethane acrylate oligomer. (Development product) Its biomass degree is 71% while its mechanical properties are the same as a non-biomass grade UV-3300B, with higher elongation and very soft rubbery elasticity suitable for using UV-curable adhesives for electronics devices. Features Bio-based Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Semitron® ESd 500HR Polytetrafluoroethylene PTFE electro static dissipative shapes offer an excellent combination of low frictional properties, outstanding dimensional stability, and a high resistivity range of 10E9 to 10E11 ohms per square. Reinforced with a proprietary synthetic mica, Semitron® ESd 500HR PTFE is thermally stable up to temperatures of 500° F / 260° C without degradation, and possesses high thermal insulation and a low coefficient of friction. Due to these characteristics, this grade is ideal for applications where controlled bleed off of static charges is critical.Features:Reinforced with a proprietary synthetic mica for improved performanceLow frictional properties and outstanding dimensional stabilityHigh resistivity range of 10E9 to 10E11 ohms per squareThermally stable up to temperatures of 500° F / 260° C without degradationHigh thermal insulation and low coefficient of frictionBenefits:Ideal for applications where controlled bleed off of static charges is criticalCan withstand high temperatures without degradationLow coefficient of friction and high thermal insulation provide improved performance in various applicationsApplications:Inserts for sensitive devices to reduce damage from static dischargeOther applications where controlled bleed off of static charges is critical and PTFE is typically used.Suitable for use in various industries including semiconductor and electronics, aerospace, and industrial machinery.

DIACRON™ FC-3278 is a high Tg grade polyester resin with excellent environmental friendliness using 50wt% or more of recycled material. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent chemical and weather resistance Excellent pigment dispersion. Heat-resistant Contains 50% recycled material   Benefits: Good heat resistance Durability   Applications: Powder Coating  PCM coatings      For various types of inks    *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3300B is UV curable urethane acrylate oligomer with excellent soft-elasticity, and very high elongation. It also shows good mechanical properties even at low temperature. EB and Thermal cure systems are also applicable. Features Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Good mechanical properties at low temperature Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-3288 is a polyester resin with excellent pigment dispersibility. It is a low Tg grade and is optimal as a binder for paints and adhesives. By blending with a high Tg grade DIACRON, it exhibits excellent adhesion and bendability to plastic films, moldings and metals such as aluminum, copper and iron. It improves hardness, heat resistance and toughness by using additive such as isocyanates.   Features: Low Tg and excellent substrate adhesion Excellent chemical and weather resistance Excellent pigment dispersion   Benefits: Use of biomass raw materials Flexibility  Durability   Applications: PCM coatings Adhesives for films Binder for screen inks Heat seal   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-3352 is a polyester resin with excellent environmental friendliness using 5wt% of biomass material. It is a high Tg and a low molecular weight (Mw)-grade and is optimal as a binder for paints and inks. Especially, the use of organic solvents can be reduced because low viscosity high-solid solutions are possible. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent chemical resistance Heat-resistant Excellent pigment dispersion. Can be used with cross-linking agents   Benefits: Solvent solubility High solid differentiation Use of biomass raw materials   Applications: PCM coatings For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Semitron® ESd 520HR Polyamide-imide PAI electro static dissipative shapes are a unique and advanced solution for test equipment and device handling applications within the semiconductor and electronics industry. The product possesses the unique ability to resist dielectric breakdown at high voltages, and maintains its performance throughout the 100V to 1000V voltage range while offering the mechanical performance needed to excel in demanding applications.Features:Resists dielectric breakdown at high voltagesMaintains performance throughout the 100V to 1000V voltage rangeHigh strength and heat resistanceSurface resistivity of 10E10 to 10E12 ohms per squareBenefits:High mechanical strength results in longer useful life of the test heads and greater units (tested) per hour.Minimizes the risk of 'leakage' (cross-talk)Retains its surface resistivity at electrical forces greater than 100 volts.Applications:IC Device Testing Fixtures: A test fixture manufacturer recently began using Semitron ESd 520HR that combines electrostatic dissipation (ESD) and high mechanical strength, to make integrated circuit test heads.Test nests, sockets, and contactors for test equipment and other device handling components.Other applications where controlled bleed off of static charges is critical.

DIACRON™ FC-1565 is a polyester resin with excellent solvent solubility. It is a low molecular weight (Mw)-grade of FC-1494 and is optimal as a binder for paints and inks due to its excellent pigment dispersibility. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent chemical resistance Excellent pigment dispersion Can be used with cross-linking agents   Benefits: Solvent solubility Durability High solid differentiation Use of biomass raw materials   Applications: Solventborne Coating For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-3294 is a polyester resin with excellent solvent solubility and is optimal as a binder for paints and inks. It exhibits excellent adhesion to plastic films, moldings and metals such as aluminum, copper, and iron. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent pigment dispersion. Can be used with cross-linking agents. Excellent chemical and weather resistance   Benefits: Solvent solubility High solid differentiation Durability   Applications: For various types of inks (Screen printing and inkjet, etc. )               PCM coatings      Solventless & High Solids Coating     *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Ketron® CM HPV Polyetheretherketone PEEK shapes, a compression molded, carbon fiber reinforced, graphite and PTFE lubricated material that offers the lowest coefficient of friction and the best machinability of all PEEK materials. Features: Compression molded and carbon fiber reinforced with graphite and PTFE lubricants Lowest coefficient of friction and best machinability of all PEEK materials Low wear and friction, and high LPV Benefits: Improves the performance of service bearings, bushings, insulators, valves, and seals with its combination of low wear and friction and high LPV Low coefficient of friction and best machinability of all PEEK materials Suitable for wear and friction applications Applications: Service bearings Bushings Insulators Valves Seals Wear and friction applications Ketron® CM HPV PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your service bearings, bushings, insulators, valves, and seals or need a material suitable for wear and friction applications, Ketron® CM HPV PEEK is the ideal solution.

Semitron® ESd 490HR Polyetheretherketone PEEK electro static dissipative shapes offer similar physical properties as Semitron® ESd 480 PEEK, but exhibit a higher resistivity value in the 10E8 to 10E10 ohms per square range. Semitron® ESd 490HR PEEK components are thermally stable to temperatures of 490° F / 270° C without degradation, and also possess high structural strength and stiffness combined with excellent dimensional stability. Furthermore, this particular grade is non-sloughing, which is why it is an ideal solution for socket, nest, and contactor manufacturing for test equipment, and other electronic device handling applications.Features:High resistivity value in the 10E8 to 10E10 ohms per square rangeThermally stable to temperatures of 490° F / 270° C without degradationHigh structural strength and stiffnessExcellent dimensional stabilityNon-sloughingBenefits:Ideal for socket, nest, and contactor manufacturing for test equipmentSuitable for electronic device handling applicationsNon-sloughing feature makes it a good option for applications where debris generation is a concernHigh thermal stability and dimensional stability make it suitable for high-temperature and critical applicationsApplications:Socket, nest, and contactor manufacturing for test equipmentElectronic device handling applicationsOther high-temperature and critical applications requiring high resistivity, thermal stability, and dimensional stability.

DIACRON™ FC-1588 is a polyester resin with excellent solvent solubility. It is a low molecular weight (Mw)-grade of ER-535 and is optimal as a binder for paints and inks. Especially, the use of organic solvents can be reduced because low viscosity high-solid solutions are possible. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Low temperature fusion Excellent metal adhesion Excellent pigment dispersion. Can be used with cross-linking agents   Benefits: Solvent solubility High solid differentiation Use of biomass raw materials   Applications: Solventborne Coating For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Ketron® CM 1030HT Polyetherketone PEEK, a carbon filled material that provides added stiffness at high temperatures. With excellent dimensional stability, chemical and corrosion resistance, this material is ideal for a variety of applications that require strength, stiffness and stability at high temperatures. Features: Carbon filled for added strength and stiffness Provides added stiffness at high temperatures Good dimensional stability Excellent chemical and corrosion resistance Benefits: Improved strength and stiffness at high temperatures Suitable for high temperature applications Good dimensional stability ensures consistent and accurate performance Excellent chemical and corrosion resistance ensures long-lasting performance in harsh environments. Applications: Aerospace industry Automotive industry Medical industry Industrial machinery High-temperature applications Ketron® CM 1030HT PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your aerospace, automotive, medical, industrial machinery or high-temperature applications, Ketron® CM 1030HT PEEK is the ideal solution.

SHIKOH™ UV-3700B is UV curable urethane acrylate oligomer with high elongation and soft rubbery elasticity. It is relatively low viscosity despite its high molecular weight. EB and Thermal cure systems are also applicable. Features Soft elastic type, High elongation High molecular weight but relatively low viscosity Non-solvent (100% hardening ingredient) For UV adhesion with monomers Non-yellowing Applications Adhesive: UV/ EB/ Thermal-curable adhesive for electronics device, optical use and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Semitron® ESd 410C PEI Polyetherimide electro static dissipative shapes are the perfect solution for semiconductor and electronics handling environments. These shapes offer exceptional dimensional stability and can withstand temperatures up to 410º F without degradation. The unique properties of Semitron® ESd 410C PEI make it ideal for a wide range of applications, including handling tray, circuit board, hard disk drive, and sensitive processing equipment applications.Features:Surface resistivity of 104 - 106 ohms/sq.Thermal performance to 210 °C (410 °F)Low stress for tight tolerance machiningHigh strength and stiffnessBenefits:Excellent dimensional stabilityResistant to high temperaturesLow stress for tighter tolerances during machiningReduced coefficient of linear thermal expansionMinimal water absorptionApplications:Handling Trays: Trays manufactured from Semitron® ESd 410C dissipate static charges reliably and are dimensionally stable. (Prior materials: PPS, PEEK, Vespel® PI)Circuit Boards: Semitron ESd 410C is ideal for use in circuit boards as it offers excellent dimensional stability and can withstand high temperatures without degradation.Hard Disk Drives: Semitron ESd 410C is an ideal material for use in hard disk drives due to its high strength, low stress properties and exceptional dimensional stability.Sensitive Processing Equipment: Semitron ESd 410C offers low stress properties, minimal water absorption and high strength making it an ideal choice for use in sensitive processing equipment.

Semitron® ESd 420V PEI Polyetherimide electro static dissipative shapes, a high-performance material designed for use in the semiconductor and electronics industries. With its unique combination of properties, this grade offers a range of benefits for device handling and test applications.Features:High strength and stiffness, making it suitable for extreme structural applicationsExcellent resistivity in the 10E5 to 10E8 ohms per square range, ensuring reliable electrostatic dissipationHeat deflection temperature of 419° F / 215° C, making it suitable for high temperature environmentsNot subject to dimensional change as a result of exposure to moistureBenefits:Suitable for use in a range of applications within the semiconductor and electronics industriesOffers reliable performance in extreme conditionsCost-effective alternative for applications that do not require the thermal performance of ultra-high performance materialsApplications:Device handling and test applications within the semiconductor and electronics industriesSuitable for use in high temperature environments, including extreme structural applications.

Ketron® CA30 Polyetheretherketone PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance that Ketron® GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications.

Semitron® CMP XL20 Polyamideimide PAI shapes were specifically developed for CMP ring applications in the semiconductor and electronics industry, due to their excellent long wear life in CMP slurries. In addition to these characteristics, Semitron® CMP XL20 PAI components display high strength and stiffness, and outstanding wear resistance over a broad range of temperatures, making this grade the ideal solution for dynamic applications in process environments.Features:Specifically developed for CMP ring applications in the semiconductor and electronics industryExcellent long wear life in CMP slurriesHigh strength and stiffnessOutstanding wear resistance over a broad range of temperaturesBenefits:Ideal solution for dynamic applications in process environmentsSignificantly lower cost per waferOutperforms PPS up to 20x in most processesPromotes fewer edge defects and better uniformityApplications:CMP ring applications in the semiconductor and electronics industryCan be used in clamp rings, trench rings, screws, pins, and shower headsSuitable for use in centering pins, focus rings, insulators, vacuum pads, and wafer guides.

Ketron® GF30 Polyetheretherketone PEEK, a 30% glass fiber reinforced grade that offers excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. This material is designed for applications where high strength, stiffness, and stability are needed, especially at high temperatures. Features: 30% glass fiber reinforced for added strength and stiffness Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Low expansion rate and high flexural modulus Suitable for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 300°F / 150°C Benefits: Offers improved strength, stiffness, and stability in high temperature applications Low expansion rate and high flexural modulus make it suitable for structural applications Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Applications: Structural applications Aerospace industry Automotive industry Medical industry Industrial machinery Chemical processing Ketron® GF30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions, especially at high temperatures. Whether you are looking to improve the performance of your structural applications in the aerospace, automotive, medical, industrial machinery or chemical processing industries, Ketron® GF30 PEEK is the ideal solution.

Duratron® T4503 PAI Polyamide-imide is a compression molded material that offers exceptional electrical insulation properties and excellent dimensional stability. This grade is often selected for extreme applications where large geometries are required, such as dies or thermal insulators. It has a similar composition to Duratron® T4203 PAI and is known for its high compressive strength, elongation, and impact resistance.Features:Outstanding electrical insulation propertiesExcellent dimensional stabilityHigh compressive strength and elongationImpact resistanceBenefits:Suitable for extreme applications such as dies and thermal insulatorsCan be used for large geometriesCan be used for electrical connectors and insulatorsApplications:Electrical connectors and insulatorsStructural components such as linkages and seal ringsWear applications involving impact loading and abrasive wearHigh Temperature Electrical ConnectorsBearing CagesCan Mandrel

Duratron® U1000 PEI Polyetherimide shapes, a high-performance plastic that offers exceptional strength, dimensional stability, and flame and heat resistance. With the ability to perform continuously to 340°F / 170°C, Duratron® U1000 PEI is the ideal solution for applications that require consistent dielectric properties over a wide frequency range.Features:High strengthDimensional stabilitySuperior flame and heat resistancePerform continuously to 340°F / 170°CHydrolysis and chemical resistanceBenefits:Suitable for a variety of applications requiring high strength and rigidity at elevated temperaturesCan withstand repeated autoclaving cycles making it ideal for medical, pharmaceutical, and biotechnology marketsHydrolysis and chemical resistance make it suitable for electrical / electronic insulators and semiconductor process componentsApplications:Medical and pharmaceutical industryBiotechnology marketElectrical / electronic insulatorsSemiconductor process componentsStructural components requiring high strength and rigidity at elevated temperaturesDuratron® U1000 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions. Whether you are looking to improve the performance of your medical, pharmaceutical, or biotechnology applications or need a material suitable for electrical/electronic insulators and semiconductor process components, Duratron® U1000 PEI is the ideal solution.

Semitron® ESd 420 PEI Polyetherimide electro static dissipative shapes exhibit high strength and stiffness, and excellent resistivity in the 10E5 to 10E8 ohms per square range. This grade in particular excels in high temperature environments, making it ideal for extreme structural applications in semiconductor and electronics markets.Features:High strength and stiffnessExcellent resistivity in the 10E5 to 10E8 ohms per square rangeSuitable for high temperature environmentsSurface resistivity: 106 - 109 ohms/sqBenefits:Ideal for extreme structural applications in semiconductor and electronics marketsOnly truly dissipative plastic product for use in high temperature applicationsCan withstand harsh conditions while maintaining its electrostatic propertiesApplications:Semiconductor and electronics industryHigh temperature structural applications such as in electronic components and equipment, where electrostatic discharge (ESD) protection is necessary.Can be used in electronic packaging, automotive, aerospace, and other industries where static control is critical.

Duratron® U2300 PEI, a flame resistant Polyetherimide that offers exceptional rigidity, strength, dimensional stability, and heat resistance. With 30% glass-reinforcement, Duratron® U2300 PEI is the most durable and high-performance plastic offered in the Duratron® PEI line.Features:30% glass-reinforced for highest rigidity, strength, dimensional stability, and heat resistanceFlame resistantLowest Coefficient of Linear Thermal ExpansionSuperior strength-to-weight ratio and tensile strengthBenefits:Ideal for reusable medical devices, analytical instruments, electrical insulators and semiconductor process components, and structural components that require high strength and rigidity at elevated temperaturesCan withstand harsh conditions and high temperaturesSuitable for a wide range of applicationsApplications:Reusable medical devicesAnalytical instrumentsElectrical insulatorsSemiconductor process componentsStructural components that require high strength and rigidity at elevated temperaturesDuratron® U2300 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions and high temperatures. Whether you are looking to improve the performance of your reusable medical devices, analytical instruments, electrical insulators and semiconductor process components, or need a material that can withstand high temperatures and harsh environments, Duratron® U2300 PEI is the ideal solution. Try it today and experience the difference for yourself!

Ketron® CM CA30 Polyetheretherketone PEEK, a compression-molded, 30% carbon fiber-reinforced grade that offers exceptional impact, corrosion, chemical, and wear resistance. This black-colored material is designed for applications where high strength, stiffness, and thermal conductivity are needed. Features: 30% carbon fiber reinforced for added strength and stiffness Outstanding impact, corrosion, chemical, and wear resistance Reduced thermal expansion for improved performance High thermal conductivity for rapid heat dissipation Suitable for large parts and bearing applications Benefits: Extends the life of components by resisting wear and corrosion Improves pressure-velocity capabilities and bearing life by dissipating heat faster Provides 3.5 times higher thermal conductivity compared to unreinforced PEEK Offers even higher stiffness, mechanical strength, and creep resistance than Ketron GF30 PEEK Applications: Bearing applications Large parts Automotive industry Aerospace industry Medical industry Industrial machinery Chemical processing Ketron® CM CA30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your bearing applications, need a strong and stiff material for large parts or are in the automotive, aerospace, medical, industrial machinery or chemical processing industries, Ketron® CM CA30 PEEK is the ideal solution.

Techtron® HPV PPS is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added wear resistance and strength of glass fiber reinforcement and internal lubrication. This compression-molded material is designed to excel in demanding environments and applications where wear resistance and dimensional stability are required.Key features:Superior wear resistance: internally lubricated and glass fiber-reinforced, allowing it to withstand high loads and minimize wear and tearOutstanding chemical and hydrolysis resistance: suitable for use in harsh environments and chemicalsExcellent dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerancesGreat electrical insulating and dielectric propertiesLow coefficient of friction and inherent low flammabilityGlass fiber reinforced: increased strength and stiffness, ideal for wear componentsFood grade availableBenefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion, and wearEnhanced precision and dimensional stabilityImproved electrical insulation and dielectric propertiesReduced friction and lower flammability riskMore cost-effective than advanced engineering plastics for certain applicationsApplications:Wear components such as bushings and bearings, CIP wash down parts, and pump, valve, and compressor applications in the aerospace, food processing, and oil and gas industries.Industrial equipment such as industrial drying and food processing ovens (bearings, rollers, etc.)Chemical process equipment (pump-, valve & compressor components)Electrical insulating systemsCost-effective alternative to advanced engineering plastics in certain applicationsTechtron® HPV is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, including food grade, making it easy to incorporate into your designs.

Duratron® U2200 PEI Polyetherimide shapes, a high-performance plastic that offers exceptional rigidity, dimensional stability, high temperature resistance, and a low Coefficient of Linear Thermal Expansion. With 20% glass-reinforcement, Duratron® U2200 PEI is a versatile and durable material that is suitable for a wide range of applications.Features:20% glass-reinforced for exceptional rigidity and dimensional stabilityHigh temperature resistanceLow Coefficient of Linear Thermal ExpansionExceptional strength-to-weight ratio and increased tensile strengthGreat electrical insulatorBenefits:Versatile and durable material that can withstand harsh conditionsIdeal for semiconductor and electronics applications where dimensional stability, low thermal expansion and electrical insulation is importantSuitable for a wide range of applicationsApplications:Semiconductor and electronics applicationsElectrical insulationApplications that require dimensional stability, high temperature resistance and low thermal expansionDuratron® U2200 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions. Whether you are looking to improve the performance of your semiconductor and electronics applications or need a material that can withstand high temperatures and harsh environments while providing electrical insulation, Duratron® U2200 PEI is the ideal solution.

Ketron® CM GF30 Polyetheretherketone PEEK, a compression-molded, 30% glass fiber reinforced grade that offers excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. This brownish-grey colored material is designed for applications where high strength, stiffness, and stability are needed in extreme environments. Features: 30% glass fiber reinforced for added strength and stiffness Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Low expansion rate and high flexural modulus Suitable for large structural applications that require superior strength, stiffness, and stability Benefits: Offers a higher stiffness and creep resistance than Ketron 1000 PEEK Has a much better dimensional stability Ideal for structural applications carrying high static loads for long periods of time at elevated temperatures Applications: Structural applications Aerospace industry Automotive industry Medical industry Industrial machinery Chemical processing Ketron® CM GF30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your structural applications in the aerospace, automotive, medical, industrial machinery or chemical processing industries, Ketron® CM GF30 PEEK is the ideal solution. However, it is important to note that the glass fibers tend to abrade the mating surface so the suitability for sliding parts should be carefully examined.

Ketron® HPV Polyetheretherketone PEEK shapes, a carbon fiber reinforced, graphite and PTFE lubricated material that offers the lowest coefficient of friction and the best machinability of all PEEK materials. This black-colored material is designed for applications where low wear and friction, and high pressure-velocity capabilities are needed. Features: Carbon fiber reinforced with graphite and PTFE lubricants Lowest coefficient of friction and best machinability of all PEEK materials Excellent tribological properties (low friction, long wear and high pressure-velocity capabilities) Benefits: Improves the performance of service bearings, bushings, insulators, valves, and seals with its combination of low wear and friction and high LPV Long wear and high pressure-velocity capabilities make it suitable for wear and friction applications The carbon fibers, PTFE and graphite lubrication results in a Ketron PEEK "Bearing Grade" Applications: Service bearings Bushings Insulators Valves Seals Wear and friction applications Ketron® HPV PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your service bearings, bushings, insulators, valves, and seals or need a material suitable for wear and friction applications, Ketron® HPV PEEK is the ideal solution.

Fluorosint® 500 is an advanced polymer material that combines the excellent chemical resistance, low friction, and high temperature properties of PTFE (polytetrafluoroethylene) with added stability and wear resistance. This material is designed to excel in demanding applications where high performance, reliability, and tight dimensional control are required.Key features:Nine times greater resistance to deformation under load than unfilled PTFE: provides excellent wear and deformation resistanceLow coefficient of linear thermal expansion: approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, eliminating fit and clearance problems for designersPTFE base: provides excellent chemical resistance, low friction, and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionBenefits:High resistance to deformation under load, making it ideal for sealing applications where tight dimensional control is requiredLow coefficient of linear thermal expansion, eliminating fit and clearance problems in high temperature and dynamic environmentsEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:Sealing applications where tight dimensional control is requiredHigh temperature and dynamic environments where fit and clearance are a concernChemical processing industries where high chemical and hydrolysis resistance is neededAny application that requires stability and wear resistance in harsh environments.Fluorosint® 500 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. With its added stability and wear resistance, Fluorosint® 500 is an excellent choice for applications in chemical processing, aerospace, automotive and other industries where tight dimensional control and high-performance sealing are required.

Duratron® CU60 PBI, the ultimate engineering plastic for high-performance applications. This advanced material is made from Polybenzimidazole (PBI) and is the highest performing engineering plastic offered by Mitsubishi Chemical Advanced Materials. With superior mechanical properties, heat resistance, and mechanical property retention over 400°F / 205°C, Duratron® CU60 PBI is the ideal choice for applications where extreme temperatures and high loads are present.Features:Superior mechanical properties, heat resistance, and mechanical property retention over 400°F / 205°CBetter wear resistance and load carrying capabilities at extreme temperatures than any other reinforced or unreinforced advanced engineering plastic"Clean" in terms of ionic impurity and does not outgas (except water)Excellent ultrasonic transparency, making it an ideal choice for probe tip lenses in ultrasonic measuring equipmentExcellent thermal insulation, other plastics in melt do not stick to Duratron CU60 PBIBenefits:Duratron® CU60 PBI offers unmatched performance in high-heat applications, making it ideal for high heat bushings, connectors, valve seats, and probe tip lenses in semiconductor manufacturingIts superior wear resistance and load carrying capabilities make it a great choice for aerospace and other high-performance industriesIts "clean" characteristics make it ideal for use in vacuum chamber applications in semiconductor manufacturingIts excellent thermal insulation and non-stick properties make it ideal for contact seals and insulator bushings in plastic production and molding equipmentDuratron CU60 PBI is an ideal replacement for metals and ceramics in pump components, valve seats, bearings, rollers, and high-temperature insulatorsApplications:High-performance vacuum chamber applications in semiconductor manufacturingAerospace and other high-performance industriesHigh heat bushings, connectors, valve seats, and probe tip lensesContact seals and insulator bushings in plastic production and molding equipmentPump components, valve seats, bearings, rollers, and high-temperature insulatorsCritical components to decrease maintenance costs and to gain valuable production "uptime".

Semitron® ESd 480 Polyetheretherketone PEEK electro static dissipative shapes are a top choice for critical test fixture and wafer handling applications in wet process tools, where static dissipation is critical. These shapes are specifically designed to provide excellent chemical resistance properties and high dimensional stability under varying environmental conditions.Features:Excellent chemical resistance propertiesHigh dimensional stability under varying environmental conditionsSurface resistivity: 106 - 109 ohms/sqBenefits:Ideal for critical test fixture and wafer handling applications in wet process toolsProvides a dissipative range of 106 - 109 ohms/sq, ensuring static dissipation is criticalDimensionally stable, making it ideal for critical test fixture applicationsApplications:Test fixture and wafer handling applications in wet process toolsStructural applications in wet process tools where static dissipation is importantWell-suited for use in wafer handling and other structural applications in wet process tools where static dissipation is important.

Ertalyte® is a high-performance polyethylene terephthalate polyester (PET) produced by Mitsubishi Chemical Advanced Materials. With its exceptional wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, Ertalyte® is the ideal material for applications that require sustained high loads and high-temperature performance.Features:Excellent wear resistanceLow coefficient of frictionHigh strength and toughnessResistant to moderately acidic solutionsRetains more of its original strength up to 180° F / 85° C than nylons or acetalsBenefits:Capable of sustaining high loadsIdeal for applications requiring high-temperature performanceExtends the service life of componentsLow maintenance and repair costsSuitable for use in harsh environmentsApplications:PharmaceuticalFood processing and packagingOil and gasBearings and structural applicationsAny application requiring high load and high-temperature performance.

Fluorosint® MT-01 is an advanced polymer material that combines the excellent chemical resistance, low friction and high temperature properties of PTFE (polytetrafluoroethylene) with the added strength, stiffness and stability. This material is designed to excel in demanding applications where high performance and reliability are required.Key features:High strength and stiffness: provides superior mechanical performance at elevated temperaturesPTFE base: provides excellent chemical resistance, low friction and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear, impact and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:High-performance seat, seal and wear applications where extreme conditions are present such as high temperature, pressure and chemical exposureComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesComponents that need high chemical resistance, low friction, and high temperature properties such as valves, pumps, and heat exchangers.Fluorosint® MT-01 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. It's also important to mention that the temperature and chemical resistance can vary depending on the grade of PTFE used as well as other additives, always consult with the manufacturer for the exact properties of the final material.

Semitron® MDS 100 modified Polyetheretherketone PEEK shapes offer a remarkable combination of strength, stiffness, and stability. This grade in particular was developed for use in uncontrolled application environments where a high level of precision is required. Due to this, Semitron® MDS 100 components are often used as test sockets, nests, and fixtures in test and package equipment throughout the semiconductor and electronics industry.Features:Remarkable combination of strength, stiffness, and stabilityDeveloped for use in uncontrolled application environments where a high level of precision is requiredMoisture absorption of 0.10% at 24 hrs. (per ASTM D570)Thermal performance to 210 °C (410 °F)Flexural modulus > 1,400,000 psiBenefits:Ideal for test sockets, nests and fixtures in test and package equipmentSuitable for use in semiconductor and electronics industryCan withstand harsh, uncontrolled environmentsLow moisture absorption ensures dimensional stabilityHigh thermal performance and flexural modulus ensures durability and precisionApplications:Test sockets, nests and fixtures in test and package equipmentOther applications in the semiconductor and electronics industry that require a high level of precision and stability in uncontrolled environments.