Products

Level Sealer™ is a new generation of Post-Catalyzed amino alkyd finishing system that offers the ultimate in durability. It is a HAPS Free high solids, waterwhite formula specifically designed for interior wood surfaces that are exposed to moisture, heat and household chemicals. It was also designed so that you can build the dry mils past the normal 5 mils maximum recommendation. So, if you want to have a full fill or thick build look and you do not want to go to polyurethane, Level Sealer™ is for you. It gives good sag resistance and can be sprayed from 4-10 wet mils on a vertical surface. It can also be built with multiple thin coats to get 10 - 12 dry mils by allowing each coat to dry thoroughly.

ML Campbell AC (Acid Cure) Sealer is a high solids acid catalyzed sealer for use under clear acid cure post-catalyzed and pre-catalyzed finishes. AC Sealer will produce an easy sanding wood sealer with very good durability and high resistance to water, solvents and chemicals. Sandpaper (no-fill) must be used for sanding, 220 grit is recommended. AC Sealer must be catalyzed 10% with C1491 M.L. Campbell Care Catalyst added to unreduced product prior to use.

EnviroClaw® Formaldehyde Free Pre-Cat White Primer was developed using our breakthrough solvent borne Clean Cure Technology which provides a HAPs free, Formaldehyde Free, fast dry, easy sanding pre-catalyzed primer and helps create a safer work environment and improving indoor air quality once a project is installed. EnviroClaw Formaldehyde Free Pre-Cat White Primer was specially formulated for use as the first coat under EnviroMax Formaldehyde Free Pre-catalyzed White/Opaque Lacquer. It exhibits very good adhesion on wood, particleboard and hard boards, it has outstanding holdout over porous surfaces such as soft wood and untempered hard board, it sands very well to produce an excellent base coat and was specially developed for filling the open pores on MDF board.

Agualente® Plus Stain-blocking Water Borne White Primer is a fast drying, easy sanding water borne white primer made with a very unique all acrylic polymer that has built in functionality to help prevent tannin / stain migration. Special polymers lock in water-soluble tannins to help prevent them from bleed through while also creating an ideal smooth basecoat for water borne pigmented topcoats.

ML Campbell HP WB Production Lacquer Primer is a fast drying and easy sanding pigmented primer made with European acrylic copolymer resin technology. HP Water Borne Production Primer is specially formulated to be used as the first coat under HP Water Borne Production Lacquer Pigmented, but it can also provide an ideal smooth base coat for other water borne pigmented topcoats. HP Water Borne Production Primer is an ideal primer for wood and MDF on commercial and residential millwork, furniture and display fixtures.

AquaFi® WB UNIVERSAL PRIMER is a fast drying, easy-to-sand water borne primer made with a unique acrylic polymer, creating an ideal smooth basecoat to achieve adhesion under various MLC solvent borne and water borne topcoats. Unique properties include: High solids, quick build, good wet-out and hang, great hide, fast dry-to-sand, tannin blocking and is Low VOC.

EnviroSand® Formaldehyde Free Pre-Cat Sealer was developed using M.L. Campbell’s solvent borne breakthrough Clean Cure™ Technology which provides an acid cure formaldehyde free amino-alkyd pre-catalyzed sealer that is both low odor and HAPs free helping to create a safer work environment. This sealer applies and sands easily and provides a smooth surface for EnviroMax Formaldehyde Free Pre-Cat topcoats. EnviroSand Sealer and EnviroMax Pre-Cat topcoats were specifically formulated to eliminate formaldehyde off gassing concerns from acid cure coatings on commercial and residential projects.

ML Campbell High Performance WB Production Lacquer Sealer is a technically advanced single component clear sealer designed for interior wood millwork surfaces. It is based on European acrylic copolymer resin technology that offers fast dry, low VOC, HAPS Free formula designed for air dry and forced dry production application. HP WB Production Lacquer Sealer is ideal for quick application and features an easy sanding formula that provides a flat sealed surface for HP WB Production Lacquer topcoats.

CODA® Interior Hybrid Polyurethane Black Primer is two-component acrylic/alkyd resin blend that offers exceptional adhesion, coverage and quick dry times. This unique hybrid technology provides strong yellowing resistance and durability, and consists of primers, sealers, tintable pigment, and Interior Clear with a full range of sheens. This easy-to-use formulation utilizes just one catalyst and one mix ratio. This simple combination makes CODA the perfect choice for use on bar tops, conference room tables, cabinets, furniture, millwork or any other interior wood surface requiring a hard durable finish.