Products

MOCOM Compounds ALCOM® PC 740/4 CC1120-05LD is a polycarbonate base polymer with a special filler/additive system that offers light scattering, high light transmission, and good flow. It has been approved by GS93016 and requires pre-drying conditions of 120°C in a dry air (dessiccant) dryer for 2-4 hours and 120°C in an air circulating dryer for 4-12 hours with a maximum moisture content of <0.02%. For processing injection molding, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C.

MOCOM Compounds ALTECH® PS-HI A 1000/901 WT1260-20 is a polystyrene base polymer with impact-easy release (demolding) properties, designed for injection molding grade applications. It is suitable for use in the Automotive, electrical and electronic, and building and construction market segments, to make injection molded parts such as bezels and housings. Pre-drying conditions should be done in a dry air (dessiccant) dryer at 60-80°C for 2-3 hours, or in an air circulating dryer at 60-80°C for 2-3 hours. Processing injection molding should be done with a melt temperature of 180-260°C and a mold temperature of 10-70°C.

MOCOM Compounds ALTECH® PP-H A 4925/500 MR25 is a polypropylene homopolymer with 25% talcum filler/additive system that is heat-stabilized, easy to release (demold), and processing-stabilized. This material is suitable for injection molding at a melt temperature of 200-250°C and a mold temperature of 20-70°C and is used in the market segments of furniture, building and construction, and automotive for injection molded parts and interior decoration/finishing. Typical applications include functional components, housings, and fixing elements.

MOCOM Compounds ALTECH® PBT A 1000/106 is a polybutylene terephthalate base polymer that is heat stabilized and has easy release (demolding) properties. It is used in various market segments for injection molded parts. For injection molding, melt temperature should be between 250-270°C and mold temperature should be between 40-70°C.

MOCOM Compounds ALCOM® PP 620/10 GY1464-04MCF is a polypropylene heterophasic copolymer with a gray, metallic color. It features flow line optimization, low tendency to produce flow lines, slip agent, and heat stabilization. This product is suitable for applications such as household items and housings, and can be processed using injection molding with a melt temperature of 200-270°C and mold temperature 20-70°C.

MOCOM Compounds ALFATER® XL A65I 2GP0050 is a black thermoplastic vulcanisate (PP+EPDM) with good recovery, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for use in injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components. It can be adhered to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general. It has excellent durability and performance.

WIC PP 15 BKD is a polypropylene-based polymer with 15% carbon fiber filler and a deep black color. It is suitable for injection molding with a melt temperature of 210-260°C and a mold temperature of 30-60°C. It has heat aging stabilization and is suitable for use in the automotive and sport market segments. Under certain conditions, the increased thermal conductivity should be considered.

MOCOM Compounds ALCOM® PC 740/4 UV CC1269-08LD is a polycarbonate-based material containing a special filler and light scattering, UV stabilized additives. It has GS93016 approval and is suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements. Injection molding should be done at a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALTECH® PP-H A 2020/159 GF20 CP is a polypropylene homopolymer reinforced with 20% glass fibers. It is chemically coupled and offers high stiffness and high toughness. This material is suitable for use in automotive, building and construction, and other markets. It can be used for engine and drive systems, transport systems, and various injection molded parts such as housings and operating elements. To ensure peak performance, store it in a dry place, away from light, and not above 30°C.

MOCOM Compounds ALCOM® PC 740/4 UV GY1144-13LDS is a polycarbonate polymer with a special filler/additive system which is UV stabilized and has translucent, light scattering, and high light diffusion properties. It is suitable for automotive, lighting, and light transparent components applications such as lamp covers, display elements, and operating elements.

MOCOM Compounds ALTECH® ABS A 1000/506 is a high heat and processing stabilized acrylonitrile/butadiene/styrene/copolymer injection molding grade suitable for various market segments, such as domestic appliances and injection molded parts. The pre-drying conditions require 80°C in an air circulating dryer for 3-6 hours and 80°C in a dry air (dessiccant) dryer for 2-4 hours, depending on moisture content, with a maximum moisture content of <0.20%. The melt temperature during injection molding should be between 200-240°C and the mold temperature should be between 50-80°C. The product should also be protected from light in an environment not exceeding 30°C.

MOCOM Compounds ALCOM® ABS 530/29 HM-AG is a Pre-Drying Conditions Acrylonitrile/Butadiene/Styrene/Copolymer with a filler/additive system of hygienic material and light stabilizer, in white, similar to RAL 9003, gray, similar to RAL 7004, similar to RAL 7015, and similar to RAL 7043, with special features of antibacterial acc. to ISO 22196. It is marketed in segments such as packaging, personal care, household goods, furniture, building and construction, and sport and leisure, with application areas such as injection molded parts, and typical applications including sanitary articles, hygiene products, domestic appliances, functional components, handles, and fittings.

MOCOM Compounds ALCOM® LDDC PC 1000 UV 17187 BK1192-17 is a polycarbonate base polymer with a special filler/additive system, UV stabilized, that is translucent, light scattering and high light diffusion. It is used in automotive and lighting applications, primarily for light transparent components, Black Panel-Technology and typical applications such as display elements and operating elements.

MOCOM Compounds TEDUR® L 9113-2 is a Polyphenylene Sulfide injection molding grade with a filler/additive system of 60% glass fibers. It has a high stiffness and is suitable for use in the Automotive and Machinery markets. Pre-drying conditions should be in a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on moisture content. Processing Injection molding should be done with a melt temperature of 320-340°C and a mold temperature greater than 140°C. It is recommended to protect from light and store at a temperature not exceeding 30°C.

MOCOM Compounds ALCOM® LD PC 1000 16102 BL1129-16 is a polycarbonate base polymer with a special filler/additive system that provides features such as translucency, light scattering, and high light diffusion dependent on wall thickness. It is approved by GS93016, suitable for injection molding with a melt temperature of 270-310°C and mold temperature of 80-110°C, and is suitable for automotive, lighting, and other applications such as lamp covers, display elements, and operating elements.

MOCOM Compounds ALTECH® ECO PC 1000/121 UV IM is a polycarbonate-based impact-modified, UV-stabilized plastic containing recycled material. It is suitable for the electrical and electronic, lighting, and various market segments and is typically used to produce housings, lamps, sockets, and various exterior parts and fixtures/fittings.

MOCOM Compounds Alcom® TCD PA6 5060 FR 15090 is a polyamide 6 (PA6) material that contains a special filler system, making it thermally conductive, electrically insulating, and halogen-free flame retardant. It is also opaque and heat stabilized, making it suitable for use in radiator systems and cooling systems in the automotive, machinery, electrical and electronic, and lighting industries.

MOCOM Compounds TEDUR® L 9560 S is a Polyphenylene Sulfide injection molding grade with 50% mineral filler/additive system. It has improved surface appearance, high surface gloss, and is metallizable. Pre-drying conditions include drying in a dry air (dessiccant) dryer for 2-4 hours depending on moisture content at 130-140°C. Processing injection molding requires a melt temperature between 320-340°C and a mold temperature above 140°C. Typical applications include reflectors for automotive, lighting and consumer products.

MOCOM Compounds ALCOM® HM PA6 1000 SB1038-21 is a pre-dried polyamide 6 with a hygienic filler/additive system, colored black, with antibacterial properties according to ISO 22196. It is designed for automotive, personal care, electrical and electronic, furniture, building and construction, and sport and leisure applications, and is suitable for injection molding with a melt temperature of 250-270°C and a mold temperature of 40-80°C. Typical applications include sanitary articles, hygiene products, domestic appliances, functional components, housings, handles, fittings, and clothing/fasteners.

MOCOM Compounds ALTECH® ABS FC 1000/106 BK1280-05 is a pre-dried Acrylonitrile/Butadiene/Styrene/Copolymer with easy flow, processing stabilized and injection molding grade features. It has a maximum moisture content of less than 0.20%. The recommended pre-drying conditions are 80°C in an air circulating dryer for 3-6 hours and 80°C in a dry air (dessiccant) dryer for 2-4 hours, depending on moisture content. This material can be used in various markets, such as the food processing industry, and is suitable for applications such as domestic appliances and injection molded parts with food contact. It is ideal for food industry applications that require a low absorption rate.

MOCOM Compounds ALTECH® ECO PA66 2035/500 GF35 is a heat-stabilized polyamide 66 with a filler/additive system of 35% glass fibers containing recycled material. It is suitable for use in automotive and other various market segments, such as cooling systems, chassis, steering, and radiator systems. Typical applications include oil pump parts, housing, automotive trim unpainted, oil pans/sumps, and bearing cages.

MOCOM Compounds ALCOM® PC 740/4 RD1451-06LD is a polycarbonate base polymer with a special filler/additive system for light scattering, high light diffusion, and translucency. It is suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements, and is approved by GS93016.

MOCOM Compounds ALCOM® PP 620/6 UV GY1380-05MCO is a gray, metallic, flow line optimized, and UV stabilized polypropylene homopolymer. It is suitable for pre-drying conditions in an air circulating dryer at 80-100°C for 2-4 hours, or in a dry air (dessiccant) dryer at 80-100°C for 2-3 hours, depending on moisture content. For injection molding, a melt temperature of 200-270°C and a mold temperature of 20-70°C are recommended. Typical applications include housings for household goods. To ensure the best performance, it should be kept dry and protected from light, not exceeding 30°C.

MOCOM Compounds ALTECH® ECO PC+ASA 1000/506 is a polycarbonate + Acrylonitrile Styrene Acrylate Blend that has been processing stabilized and contains recycled material. It is suitable for electrical and electronic applications such as sockets, plugs/connectors, and various others. Pre-drying conditions should be followed as in an air circulating dryer at 100-110°C for 3-6 hours, or in a dry air (dessiccant) dryer at 100-110°C for 2-4 hours. For injection molding, the melt temperature should be 250-290°C, and the mold temperature should be 60-100°C. This product should be stored in a cool, dark place to protect it from light.

MOCOM Compounds ALCOM® PC 740/2566 PTFE20 is a polycarbonate-based polymer with a 20% PTFE filler/additive system that provides improved sliding/wear performance. It is mainly used for functional components in the automotive and machinery market segments. For pre-drying, the recommended conditions are 120°C in a dry air (dessiccant) dryer for 2-3 h, or in an air circulating dryer between 100-120°C for 4-12 h, depending on the moisture content. The injection molding melt temperature should range between 270-310°C, and the mold temperature should be between 80-110°C.

MOCOM Compounds ALCOM® PC 740/4 CC1122-05LD is a polycarbonate-based polymer with a special filler/additive system that provides high light transmission and light scattering as well as good flow. It is approved by GS93016 and is typically used in automotive and lighting applications such as lamp covers, display elements, and operating elements. For injection molding, the recommended melt temperature is between 270-310°C and the mold temperature should be between 80-110°C. This product should be stored in a dry place and protected from light.

MOCOM Compounds ALTECH® PC B 1000/576 is a polycarbonate base polymer that can be processed using injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C. It offers easy release (demolding) features and is used in lighting, building and construction, and various market segments. For pre-drying conditions, it should be dried in a dry air (dessiccant) dryer at 120°C for 2-3 hours, or in an air circulating dryer at 100-120°C for 4-12 hours depending on moisture content, with a maximum moisture content of <0.02%. It should be stored in a dry, light-protected environment not exceeding 30°C for optimal performance.

WIC PP 30 N is a natural (carbon-optic) material with heat-age stabilization properties intended for use in automotive and sports applications. The base polymer is polypropylene, and it contains 30% carbon fiber as a filler. Prior to processing via injection molding, the material must be pre-dried at 80°C for 2-4 hours, depending on its moisture content, which should not exceed 0.10%. During injection molding, the material should be melted at temperatures ranging from 210 to 260°C, and the mold temperature should range from 30 to 60°C.

MOCOM Compounds ALTECH® ECO PA66 2030/116.01 GF30 is an impact-modified and processing-stabilized polyamide 66 resin with 30% glass fibers and recycled material. It is suitable for applications such as oil pump parts, housings, and automotive trim unpainted, cooling systems, chassis, steering, and impact protection/shock absorbers. For injection molding, the melt temperature should be between 280-300°C and the mold temperature should be between 80-120°C. It is suitable for the automotive market segment and provides excellent mechanical properties.

MOCOM Compounds ALCOM® PC 740/4 UV WT1102-04LD is a special filler base polymer polycarbonate that is UV stabilized, has light scattering, high light transmission, and easy flow properties. It is GS93016 approved and is used in the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements.

MOCOM Compounds ALCOM® LB PC 1000 16061 GY1068-16 is a polycarbonate base polymer with a special filler/additive system that is highly reflective and opaque. It is used in the automotive and lighting market segments for lighting and light blocking components, such as light guides and reflectors. It is processed with injection molding using a melt temperature of 280-320°C and a mold temperature of 80-110°C.

MOCOM Compounds ALTECH® ABS A 1000/568.03 is a Base Polymer Acrylonitrile/Butadiene/Styrene/Copolymer with a slip agent and is suitable for various building and construction and interior decoration/finishing applications. It requires pre-drying conditions before processing. Processing Injection molding is done at a melt temperature of 200-240°C, and a mold temperature of 50-80°C. It is recommended to store the material in a dry, light-protected environment not exceeding 30°C.

MOCOM Compounds ALTECH® PP-H A 2040/652 GF 40 UV CP is a Polypropylene Homopolymer pre-dried in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours, or an air circulating dryer at 80-120°C for 2-4 hours. It is processed using Injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It contains 40% glass fibers and is chemically coupled, UV stabilized, easy release (demolding), slip agent and heat stabilized. These features make it suitable for machinery, building and construction, and it is typically used for injection molded parts, clothing/fasteners and gardening tools.

MOCOM Compounds ALTECH® PS FC 1000/507 is a white polystyrene impact copolymer used for various packaging applications, suitable for food contact. Pre-drying conditions should be done in a dry air (dessiccant) dryer at 60-75°C for 2-3 hours, or an air circulating dryer at 60-75°C for 2-3 hours. Processing should be done through injection molding, with a melt temperature of 180-260°C and a mold temperature of 10-70°C.

MOCOM Compounds TEDUR® L 9421-1 S is a blend of Polyphenylene Sulfide and 40% glass fibers, 10% PTFE, which has improved sliding/wear, high stiffness, and high toughness properties. It is used in Automotive and Machinery markets for bearings and sliding elements, functional components. The pre-drying conditions involve drying in a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on moisture content. The processing injection molding involves a melt temperature of 320-340°C and a mold temperature greater than 140°C.

MOCOM Compounds ALTECH® PP-H B 4920/500 MR20 is a Polypropylene Homopolymer with a filler/additive system of 20% talcum, designed for Pre-Drying Conditions of either a dry air (dessiccant) dryer at 80-120°C for 2-3 h, or an air circulating dryer at 80-120°C for 2-4 h. Processing Injection molding requires melt temperatures of 200-250°C and mold temperatures of 20-70°C. This material has special features of good flow, low warpage, easy release (demolding), and is suitable for electrical and electronic, building and construction, and sport and leisure applications. Typical applications include housings, functional components, and fixing elements.