Products

EDAPLAN® 490 is a VOC-free wetting agent and dispersant for organic and inorganic pigments as well as carbon blacks in aqueous media. It is ideal for the manufacture of flood/float-free aqueous coatings systems (air dry and force dry, 2Ksystems) as well as for the manufacture of aqueous resin-free pigment concentrates. EDAPLAN® 490 stabilizes pigment dispersions and reduces the mill-base viscosity. Gloss, color strength and hiding power are improved and reflocculation is prevented.

MÜNZING’s METOLAT 700 series are APEO-free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The METOLAT 700 wetting agent product range has varying HLBs specifically designed to provide optimal performance based on the customer’s system chemistry and application requirements.

METOLAT 340 is a low foaming non-ionic wetting agent for water-based systems. It improves substrate wetting and leveling by reduction of surface tension. Dynamic surface tensions: 1 % at 1 Hz: 21 mN/m 1 % at 10 Hz: 34 mN/m

EDAPLAN® 918 is a solvent-free dispersing and wetting agent with an active content of 100 %. It is designed to disperse organic pigments, carbon blacks and inorganic pigments for universal use in both, water and solvent based systems, including High Solids. It is ideal for the manufacturing of coatings as well as for the manufacturing of resin free pigment concentrates. EDAPLAN® 918 stabilizes dispersed pigments and reduces mill-base viscosity. Gloss and color development are improved and reflocculation respectively Rub Out is prevented. The product is free of organic solvents.

METOLAT 514 is an anionic dispersing agent with low foam tendencies suitable for many aqueous systems. It is recommended for most common pigments and fillers. METOLAT 514 is compatible with many emulsion polymers. It can be used over a wide pH range. METOLAT 514 reduces the mill base viscosity and provides higher pigment volume concentrations. It prevents the formation of settlements and stabilizes the system.

EDAPLAN LA 413 is suitable for all non-aqueous and water reducible coating systems. It improves slip, scratch resistance and leveling. EDAPLAN LA 413 provides improved surface properties specifically in clear systems. It does not create foam and is resistant to hydrolysis.

METOLAT® 368 is a non-ionic, silicone free wetting agent for water-based systems. It improves substrate wetting and leveling. The product is VOC free according to 2004/42/EC.

EDAPLAN LA 452 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN LA 452 is free of silicone and has no adverse effects on recoatability. This additive is compatible with all common resin systems.

EDAPLAN® LA 414 is suitable for water-based and solvent-based systems. The product provides excellent slip properties and improves leveling and scratch resistance. It does not influence recoatibility. EDAPLAN® LA 414 does not stabilize foam.

MUNZING’s METOLAT 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The METOLAT 700 wetting agent product range has varying HLB’s specifically designed to provide optimal performance based on the customer’s system chemistry and application requirements.

Universal dispersing and wetting agent for organic pigments and inorganic pigments for water and solvent based coatings and pigment concentrates

Due to its specific composition METOLAT 285 can be either used as wetting agent or as defoamer. In aqueous, alkaline systems METOLAT 285 is used as wetting agent. It also improves substrate wetting and penetration of coatings into wood. METOLAT 285 is also an oil free and particle free defoamer for solving special foam problems.

EDAPLAN 494 is a VOC-free wetting agent and dispersant for inorganic and transparent pigments, e.g. iron oxides and titanium dioxides, as well as for laked red azo pigments in aqueous media. It is ideal for the manufacture of flood/float-free aqueous coatings systems (air dry and force dry, 2K systems) as well as for the manufacture of aqueous resin-free pigment concentrates. EDAPLAN 494 stabilizes pigment dispersions and reduces the mill-base viscosity.

EDAPLAN 397 is a non-ionic, liquid dispersing agent for pigments. It is especially designed for water-based systems, but it is also suitable for non water-based systems. EDAPLAN 397 is compatible with all common binders and shows only low foaming tendency.

EDAPLAN® 480 is a solvent free wetting agent and dispersant for organic and inorganic pigments and extenders in aqueous media. It is ideal for the manufacture of flood/float-free aqueous coatings systems (air dry and force dry, 2K-systems) as well as for the manufacture of aqueous and glycol containing resin-free pigment concentrates. EDAPLAN® 480 stabilizes dispersed pigments and extenders and reduces the mill-base viscosity. Gloss, color strength and hiding power are improved and reflocculation is prevented. Base paints made with EDAPLAN® 480 show very good compatibility on tinting with pigment concentrates.

EDAPLAN 711 is a high molecular weight dispersing agent for solvent borne and high solid systems. It is designed for dispersing and stabilization of organic as well as inorganic pigments and carbon blacks.

EDAPLAN 516 is an anionic dispersing agent with low foam tendencies suitable for many aqueous systems. It is recommended for most common pigments and fillers. EDAPLAN 516 is compatible with many emulsion polymers. It can be used over a wide pH range and prevents the formation of settlements and stabilizes the system. EDAPLAN 516 is particularly suitable for dispersion of titanium dioxide, sheet silicates and fillers to achieve a constantly low paste viscosity.

EDAPLAN® 492 is a VOC-free wetting agent and dispersant for carbon blacks in aqueous media. EDAPLAN® 492 is also recommended for the dispersion of organic pigments (e.g. phthalocyanine and azo pigments) and nanoscale transparent iron oxides and titanium dioxides. It is ideal for the manufacture of flood/float-free aqueous coatings systems (air dry and force dry, 2K-systems) as well as for the manufacture of aqueous resin-free pigment concentrates. EDAPLAN® 492 stabilizes pigment dispersions and reduces the mill-base viscosity. Gloss, color strength and hiding power are improved and reflocculation is prevented.

METOLAT 1299 is a silicone-free wetting and leveling agent for water based systems. It improves surface wetting and enhances leveling of low viscous systems. It provides the following properties: Effective in hard or soft water up to 100°C; Effective over a wide pH range

METOLAT 288 provides excellent surface wetting without generating foam. The product is free of mineral oil and silicones. METOLAT 288 improves good wetting and increases leveling, especially in low viscosity systems.

METOLAT 362 is a non-ionic, silicone free wetting agent with low foam tendency for water based printing inks, adhesives, emulsion paints and water borne clear as well as pigmented coatings. METOLAT 362 improves substrate and pigment wetting. It shows a very broad pH stability.

METOLAT SC-43 is an APEO-free wetting agent with low foam tendencies suitable for agricultural applications. It is recommended for most common pigments and fillers and is compatible with many emulsion polymers.

EDAPLAN® 482 is a solvent free wetting agent and dispersant for organic and inorganic pigments and extenders in aqueous media. It is ideal for the manufacture of flood/float-free aqueous coatings systems (air dry and force dry, 2K-systems) as well as for the manufacture of aqueous and glycol containing resin-free pigment concentrates. EDAPLAN® 482 stabilizes dispersed pigments and extenders and reduces the mill-base viscosity. Gloss, color strength and hiding power are improved and reflocculation is prevented. Base paints made with EDAPLAN® 482 show very good compatibility on tinting with pigment concentrates.

EDAPLAN 930 is a high molecular weight dispersing agent for solvent-based and high-solid systems. It is also suitable for water-based systems. EDAPLAN 930 is designed for dispersing organic and inorganic pigments, as well as fillers. EDAPLAN 930 reduces the viscosity at low shear ranges and stabilizes the pigments against flocculation. Furthermore it increases gloss and color strength of the coating.

EDAPLAN® 395 is a Dispersing agent for pigments and fillers in aqueous systems. EDAPLAN 395 is an anionic dispersing agent with low foam tendencies suitable for many aqueous systems. It is recommended for most common pigments and fillers.

METOLAT® 342 is a low foaming non-ionic wetting agent for water-based systems. It improves substrate wetting and leveling by reduction of surface tension. Dynamic surface tensions: 1 % at 1 Hz: 29 mN/m 1 % at 10 Hz: 42 mN/m

EDAPLAN LA 451 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN LA 451 is free of silicone and has no adverse effects on recoatability. This additive is compatible with all common resin systems.

MUNZING’s METOLAT 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The METOLAT 700 wetting agent product range has varying HLB’s specifically designed to provide optimal performance based on the customer’s system chemistry and application requirements.

EDAPLAN® 916 is a solvent-free dispersing and wetting agent with an active content of 100 %. It is designed to disperse inorganic pigments for universal use in both, water and solvent based systems, including High Solids. It is ideal for the manufacturing of coatings as well as for the manufacturing of resin free pigment concentrates. EDAPLAN® 916 stabilizes dispersed pigments and reduces mill-base viscosity. Gloss and color development are improved and reflocculation respectively Rub Out is prevented. When EDAPLAN® 916 is used, there is no need to adjust the pH value of the grind/pigment concentrate. The product is free of organic solvents.

EDAPLAN® 917 is a solvent containing dispersing and wetting agent with an active content of 35 %. It is designed to disperse inorganic pigments for universal use in both, water and solvent based systems, including High Solids. It is ideal for the manufacturing of coatings as well as for the manufacturing of resin free pigment concentrates. EDAPLAN® 917 stabilizes dispersed pigments and reduces mill-base viscosity. Gloss and color development are improved and reflocculation respectively Rub Out is prevented. When EDAPLAN® 917 is used, there is no need to adjust the pH value of the grind/pigment concentrate. The product is VOC-free.

METOLAT® 392 is a solvent-free dispersing and wetting agent for carbon blacks in aqueous media. METOLAT® 392 is a solvent-free dispersing and wetting agent for carbon blacks in aqueous media. It is ideal for the manufacturing of aqueous coatings systems based on polymer solutions and / or polymer emulsions (air dry and force dry, 2K-systems) as well as for the manufacturing of aqueous resin-free pigment concentrates. METOLAT® 392 stabilizes dispersed carbon blacks and reduces the mill-base viscosity. Gloss and color development are improved and reflocculation is prevented.

METOLAT 394 is a solvent-free dispersing and wetting agent especially designed for transparent iron oxide pigments in aqueous media. It is ideal for the manufacturing of aqueous coating systems based on polymer solutions and / or polymer emulsions (air dry and forced dry, 2K-systems) as well as for the manufacturing of aqueous resin-free pigment concentrates.

METOLAT® 355 is a wetting agent with low foam tendencies, suitable for many aqueous systems. Due to its nonionic character METOLAT® 355 is compatible with many different raw materials with broad pH stability. It provides excellent pigment and substrate wetting. METOLAT® 355 improves pigment compatibility and leveling in emulsion paints and water reducible systems.

METOLAT 364 is a APEO-free wetting agent with excellent equilibrium and dynamic surface tension reduction.Main applications as Drawing, Stamping, Corrosion protection, Grinding, Forging and Forming

METOLAT 365 is a non-ionic, silicone free wetting agent with low foam tendency for water based printing inks, adhesives, emulsion paints and water borne clear as well as pigmented coatings. METOLAT 365 improves substrate and pigment wetting. It shows a very broad pH stability.

LEUKONÖL LBA-2 is a wetting agent, suitable for many aqueous systems. It provides excellent emulsifying and stabilizing properties, specifically in the manufacturing process of emulsion polymers. LEUKONÖL LBA-2 is clearly soluble at pH 13. It is the ideal wetting agent for alkaline systems.