Products

Ply-Guard AS (Ultra Flex) is a new-generation, high-gloss, fast curing, two-component aliphatic polyaspartic polyurea topcoat that provides superior flexibility in addition to superior color and gloss retention.

Ply-Guard AS is a fast-curing, two-component polyaspartic (aliphatic polyurea) coating system. Ply-Guard AS exhibits superior color and gloss retention, excellent abrasion resistance, good flexibility, and can be applied directly to properly prepared concrete or metal surfaces. In addition, Ply-Guard AS has very good corrosion, chemical, and UV resistance, and can achieve a uniform coating thickness of 2-8 mils DFT per coat that is free of bubbles and pinholes.

Ply-Guard CM is a 1:1 mix ratio, ultra-low viscosity polyurethane compound ideal for industrial and commercial use. Its extended gel time and viscosity allows it to readily penetrate concrete more deeply, as well as providing a quick hardness build. This versatile material is designed to be used as a stand-alone material or mixed with dry silica sand to make a thicker build formula. Ply-Guard CM is perfect for rebuilding cracks, expansions, and skim coatings floors to fill in air holes and missing sections of concrete.

Ply-Guard NS is a two-component, chemical resistant, non-skid epoxy coating system designed to perform exceptionally well in a broad range of severe environments, including in the presence of strong acids/alkalis and organic solvents. It should be used wherever non-skid properties, chemical and abrasion resistance, corrosive environment resistance & outstanding adhesion are essential. Ply-Guard NS is designed for use on properly prepared concrete and metal surfaces in refineries, offshore platforms, chemical plants, food & beverage plants, and pulp and paper mills.

Ply-Guard AS (0 VOC) is a fast-curing, two-component polyaspartic (aliphatic polyurea) coating system. Ply-Guard AS (0 VOC) exhibits superior color and gloss retention, excellent abrasion resistance, good flexibility, and can be applied directly to properly prepared concrete or metal surfaces. In addition, Ply-Guard AS (0 VOC) has very good corrosion, chemical, and UV resistance, and can achieve a uniform coating thickness of 2-8 mils DFT per coat that is free of bubbles and pinholes.

Ply-Guard UR (Fast Set) is a fast set, fast gel time spray-applied, two-component Polyurea coating that is 100% solids and contains 0 VOCs.

Ply-Guard MEA is a high solids, high build Mastic Epoxy Aluminum formulation that cures to a tough, flexible, abrasion resistant film. Ply-Guard MEA is self-priming and has excellent adhesion to rusted steel that has had proper power tool cleaning. It is easy to apply by spray, roller or brush. Ply-Guard MEA has high build characteristics allowing 18 mil WFT or more while providing high sag and run resistance. Ply-Guard MEA is an ideal product for improving and upgrading old and deteriorating coating systems.

Ply-Guard PSC8 is a newly engineered two-component Polysiloxane coating technology offering the combination of technologically advanced siloxane resins and special ultraviolet inhibitors resulting in an industrial finish coat providing exceptional long term durability. Ply-Guard PSC8 provides extremely long-term performance and a wide range of uses such as exterior coatings for bridges, marine vessels, offshore structures, railcars, tanks, pulp and paper mills, chemical plants, refineries, and other steel structures exposed to the most corrosive environments.

Ply-Guard UR is a two-component, rapid curing, spray-applied Polyurea Coating/Lining System that is 100% solids and 0 VOC. Ply-Guard UR can either be applied directly to the substrate or with the aid of a primer.