LNP THERMOCOMP™ Compound - DX11355 - SABIC's Specialty

Identification & Functionality

Additives Included: Flame Retardant,
Heat Stabilizer,
Metal Deactivator,
Mold Release Agent,
UV Stabilizer
Chemical Family: Polycarbonate (PC)
Fillers Included: Talc
Polymer Name: Polycarbonate (PC)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
High Performance Thermoplastics,
Polycarbonates

Features & Benefits

Labeling Claims: Bromine-free,
Chlorine-free
Materials Features: Cost Effective,
Excellent Dielectric Properties,
Flame Retardant,
Good Colorability,
Good Mold Release,
Heat Stabilized,
High Ductility,
High Impact Resistance,
Non-brominated,
Non-chlorinated,
Pigmentable,
UV Stabilized,
Unreinforced

Applications & Uses

Markets: Automotive & Transportation,
Consumer Goods,
Electrical & Electronics,
Personal Care,
Printing & Packaging
Applications: Consumer Goods — Appliances & Electronics
Automotive & Transportation — Automotive
Interior
Electrical & Electronics — Devices & Assemblies
Consumer Electronics,
Displays,
Lighting
Printing & Packaging — Packaging
Non-Food Consumer Packaging
Personal Care — Packaging & Accessories
Applicators & Accessories
Electrical & Electronics — Parts & Components
Connectors,
Housings & Enclosures,
Switches & Relays
Plastics & Elastomers End Uses: Antenna,
Automotive Applications,
Automotive Interior Parts,
Cell Phones,
Computer Components,
Consumer Applications,
Containers,
Displays,
Electric Vehicles,
Electrical Components,
Electrical/Electronic Applications,
Enclosure,
LED Lighting,
Laptop Antenna,
Mobile Phone Antenna,
Outdoor Device Antenna,
Personal Accessories,
Tablets,
Wearable Device,
Wearable Device Antenna,
Wireless Communication
Plastics & Elastomers Processing Methods: Injection Molding,
Laser Sintering (SLS)

Properties

Flame Rating: UL 94 V0
Mechanical Properties
Physical Properties
Thermal Properties
Electrical Properties
Impact Properties
Injection Molding
Flame Characteristics
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.

⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

	Value	Units	Test Method / Conditions
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹	58	MPa	ASTM D638
Tensile Stress (Break, Type I, 50 mm/min) ¹¹	52	MPa	ASTM D638
Tensile Strain (Yield, Type I, 50 mm/min) ¹¹	5.4	%	ASTM D638
Tensile Strain (Break, Type I, 50 mm/min) ¹¹	70	%	ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹	2600	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	90	MPa	ASTM D790
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	89	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	2400	MPa	ASTM D790

	Value	Units	Test Method / Conditions
Density ¹¹	1.27	g/cm³	ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹	0.01	%	ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹	0.5	%	ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹	0.5	%	ASTM D955
Melt Flow Rate (at 300°C, 1.2 kgf) ¹¹	12	g/10 min	ASTM D1238

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	114	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000062	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000067	1/°C	ASTM E831
Relative Temperature Index (Electrical) ᵖ ¹¹	80	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	80	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	80	°C	UL 746B

	Value	Units	Test Method / Conditions
Relative Permittivity (1 GHz) ¹¹	2.92	—	IEC 60250
Dissipation Factor (at at 1 GHz) ¹¹	0.007	—	IEC 60250

	Value	Units	Test Method / Conditions
UL Recognized (94V-0 Flame Class Rating) ᵖ	min. 0.6	mm	UL 94

Regulatory & Compliance

Packaging & Availability

LNP™ THERMOCOMP™ Compound DX11355