LNP THERMOCOMP™ Compound - DX14354X - SABIC's Specialty

Identification & Functionality

Additives Included: Flame Retardant,
Heat Stabilizer,
Metal Deactivator
Chemical Family: Polycarbonate (PC)
Fillers Included: Silicone Oil,
Talc
Polymer Name: Polycarbonate (PC)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
High Performance Thermoplastics,
Polycarbonates

Features & Benefits

Labeling Claims: Bromine-free,
Chlorine-free,
No Added PFAS
Materials Features: Cost Effective,
Excellent Aesthetics,
Excellent Dielectric Properties,
Flame Retardant,
Good Aesthetics,
Good Colorability,
Good Surface Appearance,
Heat Stabilized,
High Ductility,
High Flow,
High Flowability,
High Impact Resistance,
No Added PFAS,
Non-brominated,
Non-chlorinated,
Pigmentable,
Unreinforced

Applications & Uses

Markets: Automotive & Transportation,
Consumer Goods,
Electrical & Electronics,
Personal Care,
Printing & Packaging
Applications: Consumer Goods — Appliances & Electronics
Automotive & Transportation — Automotive
Interior
Electrical & Electronics — Devices & Assemblies
Consumer Electronics,
Displays
Printing & Packaging — Packaging
Non-Food Consumer Packaging
Personal Care — Packaging & Accessories
Applicators & Accessories
Electrical & Electronics — Parts & Components
Connectors,
Switches & Relays
Plastics & Elastomers End Uses: Automotive Interior Parts,
Cell Phones,
Computer Components,
Consumer Applications,
Containers,
Displays,
Electrical Components,
Electrical/Electronic Applications,
Personal Accessories,
Tablets
Plastics & Elastomers Processing Methods: Injection Molding,
Laser Sintering (SLS)

Properties

Color: White
Flame Rating: UL 94 V1
Mechanical Properties
Physical Properties
Thermal Properties
Typical Properties
Electrical Properties
Impact Properties
Injection Molding
Flame Characteristics
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.

⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

²⁰ After 40 cycles, Similar to USCAR-2, Class III

²¹ After 40 cycles, Similar to USCAR-2, Class IV

	Value	Units	Test Method / Conditions
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹	54	MPa	ASTM D638
Tensile Stress (Break, Type I, 50 mm/min) ¹¹	49	MPa	ASTM D638
Tensile Strain (Yield, Type I, 50 mm/min) ¹¹	5	%	ASTM D638
Tensile Strain (Break, Type I, 50 mm/min) ¹¹	70	%	ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹	2500	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	85	MPa	ASTM D790
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	83	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	2500	MPa	ASTM D790
Tensile Stress (Yield, 50 mm/min) ¹¹	54	MPa	ISO 527
Tensile Stress (Break, 50 mm/min) ¹¹	47	MPa	ISO 527
Tensile Strain (Yield, 50 mm/min) ¹¹	5	%	ISO 527
Tensile Strain (Break, 50 mm/min) ¹¹	80	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	2460	MPa	ISO 527
Flexural Stress (Yield, at 2 mm/min) ¹¹	86	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	2560	MPa	ISO 178
Tensile Stress (Break, Type I, 50 mm/min) ¹¹, ²¹	44	MPa	ASTM D638

	Value	Units	Test Method / Conditions
Vicat Softening Temperature (Rate A/50) ¹¹	128	°C	ASTM D1525
Vicat Softening Temperature (Rate B/50) ¹¹	128	°C	ASTM D1525
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	111	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000057	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.00006	1/°C	ASTM E831
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80104, sp=64mm) ¹¹	113	°C	ISO 75/Af
Relative Temperature Index (Electrical) ᵖ ¹¹	80	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	80	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	80	°C	UL 746B

	Value	Units	Test Method / Conditions
Tensile Strain (Break, Type I, 50 mm/min) ¹¹, ²⁰	70	%	ASTM D638

	Value	Units	Test Method / Conditions
Izod Impact (Notched, at 23°C) ¹¹	750	J/m	ASTM D256
Izod Impact (Notched, 80103, at 23°C) ¹¹	60	kJ/m²	ISO 180/1A

	Value	Units	Test Method / Conditions
UL Recognized (94V-1 Flame Class Rating) ᵖ	min. 1	mm	UL 94

Regulatory & Compliance

Packaging & Availability

LNP™ THERMOCOMP™ Compound DX14354X