Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Key Characteristics
Low smoke, low toxicity, halogen free, flame retardant thermoplastic compound for use in all types of cables sheathing. This compound presents a high hot pressure performance, high stress crack resistance and a high tear strength, which allows it to be used as sheathing of any type of armored, large size cables.
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers Processing Methods
Properties
- Appearance
- Pellets
- Mechanical Properties
- Physical Properties
- Fire & Smoke Properties
- Thermo-Mechanical Properties
Value | Units | Test Method / Conditions | |
Elongation at Break | 165 | % | IEC 60811-501 |
Elongation at Break (After Thermal Aging: 7 days at 100ºC) | 15 | % Variation | IEC 60811-401 |
Elongation at Break: (at -30°C) | 60 (Pass) | % | IEC 60811-505 |
Tensile Strength (After Thermal Aging: 7 days at 100ºC) | -10 | % Variation | IEC 60811-401 |
Tensile Strength (at Break) | 12.5 | N/mm² | IEC 60811-501 |
Value | Units | Test Method / Conditions | |
Density | 1.5 | g/cm³ | BS EN ISO 1183-3 |
Tear Strength | 8 | N/mm | BS 6469-99.1 |
Value | Units | Test Method / Conditions | |
Conductivity of Gases | 2.1 | μS/cm | IEC 60754-2 |
Smoke Emission 3m³ | 75 | % | BS EN 61034-2 |
Corrosivity of Gases | 5.8 | pH | IEC 60754-2 |
Temperature Index | 270 | °C | BS ISO 4589-3 |
Temperature Index | 518 | °F | BS ISO 4589-3 |
Halogen Acid Gas Evaluation | max. 0.5 | % | IEC 60754-1 |
Limiting Oxygen Index | 35 | % | BS ISO 4589-2 |
Value | Units | Test Method / Conditions | |
Cold Bend (at -30°C) | Pass | No Cracks | IEC 60811-504 |
Cold Impact (at -30°C) | Pass | — | IEC 60811-506 |
Hot Pressure Deformation (at 100°C) | 30 | % | IEC 60811-508 |
Hot Pressure Deformation (at 90°C) | 25 | % | IEC 60811-508 |
Thermal Crack Resistance (at 80°C) | Pass | — | Internal Test |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Processing
Extruder - An extruder with an L/D ratio (length/diameter) between 15 and 24 and a screw with a compression ratio 1.2:1 are recommended.
Extruder Temperature Conditions - It is important that the melt temperature is not allowed to increase above 160oC. As a guide the following temperature profile is recommended:Zone #1 Zone #2 Zone #3 Zone #4 Head Die Celsius 130°C 140°C 145°C 150°C 160°C 160°C Fahrenheit 266°F 284°F 293°F 302°F 320°F 320°F This profile will vary slightly depending on extruder type, head design and output.
Screw Water Temperature - Not mandatory, if present we recommend 40°-60°C Recommended Screen Pack - Spacer ring or breaker plate only
Head & Tool Design: The head and tools should be so designed as to allow streamlined flow of material. To obtain the optimum in physical properties in the case of tubing tools, a maximum draw down ratio of 1.5:1 is recommended to avoid internal stresses.Color Masterbatches: EVA, preferable, and PE based color masterbatches including black, up to a maximum of 1%, have no detrimental effect on the properties. It is recommended that all masterbatches should be thoroughly dried before use for 8 hours at 60°C or 4 hours at 80°C in a de-humidifying drier.
Packaging & Availability
- Packaging
The following possibilities are available:
- Moisture resistant sacks containing 25kg
- Boxes with a moisture resistant heat sealed liner containing approximately 600kg
Storage & Handling
- Storage & Shelf Life
This material has unlimited shelf life. The following storage conditions are recommended:
- Packaging should remain sealed
- Avoid storage outside and in direct sunlight.