Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Key Characteristics
Low smoke, low toxicity, halogen free, flame retardant thermoplastic flexible compound mainly used in cable sheathing applications but also can be used as cable insulation. Perfect solution for when high mechanical and flexibility performance are required.
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers Processing Methods
Properties
- Color
- Appearance
- Pellets
- Mechanical Properties
- Physical Properties
- Fire & Smoke Properties
- Thermo-Mechanical Properties
Value | Units | Test Method / Conditions | |
Elongation at Break | 270 | % | IEC 60811-501 |
Elongation at Break (After Thermal Aging: 168 Hours at 100ºC) | -12 | % Variation | IEC 60811-401 |
Elongation at Break (After Thermal Aging: 168 Hours at 70ºC) | -12 | % Variation | IEC 60811-401 |
Tensile Strength (at Break) | 11.5 | N/mm² | IEC 60811-501 |
Tensile Strength (After Thermal Aging: 168 Hours at 100ºC) | -5 | % Variation | IEC 60811-401 |
Tensile Strength (After Thermal Aging: 168 Hours at 70ºC) | -25 | % Variation | IEC 60811-401 |
Value | Units | Test Method / Conditions | |
Density | 1.46 | g/cm³ | BS EN ISO 1183-3 |
Tear Strength | 10 | N/mm | BS 6469-99.1 |
Value | Units | Test Method / Conditions | |
Limiting Oxygen Index | 32 | % | BS ISO 4589-2 |
Temperature Index | 270 | °C | BS ISO 4589-3 |
Temperature Index | 518 | °F | BS ISO 4589-3 |
Value | Units | Test Method / Conditions | |
Cold Bend (at -30°C) | Pass | No Cracks | IEC 60811-504 |
Cold Impact (at -30°C) | Pass | — | IEC 60811-506 |
Elongation at Break: (at -30°C) | 60 (Pass) | % | IEC 60811-505 |
Hot Pressure Deformation (at 80°C) | 30 | % | IEC 60811-508 |
Technical Details & Test Data
- Processing
Extruder: An extruder with an L/D ratio (length/diameter) between 15 and 24 and a screw with a compression ratio 1.2:1 are recommended.
Extruder Temperature Conditions: It is important that the melt temperature is not allowed to increase above 160°C.
Zone #1 Zone #2 Zone #3 Zone #4 Head Die Celsius 130°C 140°C 145°C 150°C 160°C 160°C Fahrenheit 266°F 284°F 293°F 302°F 320°F 320°F This profile will vary slightly depending on extruder type, head design and output
Screw Water Temperature: Not mandatory, if present we recommend 40°-60°C
Recommended Screen Pack: Spacer ring or breaker plate only
Head & Tool Design: The head and tools should be so designed as to allow streamlined flow of material. To obtain the optimum in physical properties in the case of tubing tools, a maximum draw down ratio of 1.5:1 is recommended to avoid internal stresses.Color Masterbatches: EVA, preferable, and PE based color masterbatches including black, up to a maximum of 1%, have no detrimental effect on the properties. It is recommended that all masterbatches should be thoroughly dried before use for 8 hours at 60°C or 4 hours at 80°C in a de-humidifying drier.
Packaging & Availability
- Packaging
The following possibilities are available:
- Moisture resistant sacks containing 25kg
- Boxes with a moisture resistant heat sealed liner containing 600kg
Storage & Handling
- Storage & Shelf Life
This material has unlimited shelf life. The following storage conditions are recommended:
- Packaging should remain sealed
- Avoid storage outside and in direct sunlight.