Products

Crystic® Gelcoat LS 97PA Isopthalic Spray is our best weathering isophthalic spray gelcoat. It exhibits low color change and superior gloss retention when compared to all other isophthalic competitive gel coats tested. This product can be used across all markets, and it has excellent water resistance and Lloyd's approval for the marine market.

Crystic® Polyester Resin 272E is an isophthalic polyester resin designed for use in hot climates. It is used in high-performance applications such as pipes, tanks, and ducting. This versatile resin is suitable for use in filament winding, pultrusion, centrifugal molding, or contact molding processes. It has a 25-minute gel time.

Crystic® Isophthalic Brush Gelcoat GT-600 is our gelcoat range providing a fast, precise service producing high quality gelcoats for you. Recommended for use in all markets including marine, land transport and building applications. It is also suitable for general molding requirements.

Crystic® Isophthalic Brush Topcoat 65PAX is a general purpose, brush isophthalic topcoat which cures tack free when applied to the reverse side of a laminate. It can be used in applications where the back surface of a polyester laminate needs to be given a gelcoat finish to improve aesthetics.

Crystic® Spray Gelcoat 92PA is a chemical resistant spray gelcoat. It is suitable for the manufacture of bathroom products such as sinks, baths, shower trays and water slides and has been used successfully in the industry for many years. It is easy to use and repair.

Crystic® Pipe Relining Resin 4044TV01 is a thixotropic, non-accelerated ISO/NPG unsaturated polyester resin with a low exotherm. It is specially designed for the pipe-relining market, with good chemical resistance and mechanical properties. This resin is suitable for polyester felt or glass fiber reinforcement.

Crystic® Low Styrene Spray Gelcoat LS 96PA is an isophthalic gelcoat. It is filled, pre-accelerated and formulated for spray application. The viscosity profile ensures even coverage with minimal drainage and low film porosity. It is recommended for use in building and transport industries and is also suitable for general molding requirements.

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

Crystic® Polyester Resin 199 is an isophthalic polyester resin recommended for use in high-performance applications where superior thermal and electrical properties are required. It has excellent chemical and heat resistance. This product can withstand long periods (1 year) at temperatures up to 150ºC, and shorter periods at temperatures up to 200ºC, with no serious loss of properties. It has a 30-minute gel time.

Crystic® Polyester Resin 701PAX is a pre-accelerated isophthalic polyester resin with low viscosity and controlled exotherm characteristics. It is designed for use in vacuum infusion processes. This product has Lloyd's approval and is suitable for use in marine, wind energy, building and construction, and transportation.

Crystic® Polyester Resin 491PA is a pre-accelerated, thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It is versatile and suitable for performance boat hulls destined for use in warm or tropical areas. This product is also suitable for the manufacture of chemical plants, tanks, pipes, and chemical containers. It has a 12-minute gel time.

Crystic® Brush Topcoat 507PA is a pre-accelerated Topcoat with excellent water and weather resistance, designed for use in the marine and building industries. It is based on a high quality isophthalic-NPG polyester resin and has been formulated for application by brush. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crystic® Spray Gelcoat Stonecast 95PA is a pre-accelerated Gelcoat based on a high clarity, low color isophthalic/neopentyl glycol resin. It has been specially formulated to accept poly stone colored chips and be able to be spray applied by the different dry and wet spray methods available.

Crystic® Polyester Resin 491 is a thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It was developed for use in a wide range of critical applications that require toughness combined with water and chemical resistance. It is a versatile resin suitable for the fabrication of high-performance boat hulls intended for use in warm or tropical areas.

Crystic® Polyester Resin 489 is a thixotropic isophthalic polyester resin. When used with Crystic Gelcoat 65PA, they produce a matched performance system for molding boat hulls with outstanding durability and superior blister resistance. The outstanding wetting characteristics of Crystic 489 provide rapid impregnation with freedom from drainage.

Crystic® Spray Gelcoat 997SMK is a pre accelerated Isophtalic Neopenthylglycol, thixotropic and water clear polyester gelcoat specially designed to be used by airless spray equipment. It has been specially designed for the production of a transparent film on sanitary items, mainly sinks and vanity units, when excellent resistance to thermal chock is a key property.

Crystic® Very-Low Styrene Ecogel S3PA is a high performance isophthalic neopentyl glycol gelcoat. This gelcoat is pre-accelerated and formulated for spray application. Crystic Ecogel® S3PA is a low VOC product. Crystic Ecogel® S3PA has been specially designed for the production of high quality parts in the marine industry. This formulation offers an excellent hydrolysis resistance combined with a high gloss and gloss retention. Crystic Ecogel® S3PA has approval by the Lloyd’s Register of Shipping.

Crystic® Brush Topcoat 506PA White is a pre-accelerated Topcoat with excellent water and weather resistance, designed for use in the marine and building industries. It is based on a high quality isophthalic-NPG polyester resin and has been formulated for application by roller or brush. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crystic® Isophthalic Spray Gelcoat GT-1000 is a gelcoat range providing a fast, precise service producing high quality gelcoats for you. Recommended for use in all markets including marine, land transport and building applications. It is also suitable for general molding requirements.

Crystic® Low Viscosity Gelcoat 64PA is a high performance isophthalic gelcoat, pre-accelerated and formulated for brush or roller application. It is recommended for use in all markets including marine, land transport and building applications and is also suitable for general molding requirements. Crystic® Gelcoat 64PA is approved by Lloyd'™s Register of Shipping.

Zero Styrene Crystic® Ecogel S0PA is a zero styrene spray gelcoat for industrial applications such as the wind energy sector. This product is acetone free and can be used with Butanox® M-50. Key features include: High elongation Zero Styrene Content Excellent weathering performance Easy to apply Low VOC emission

Crestafix® 621CC 45 Bonding Paste is a pre-accelerated urethane acrylate/ isophthalic polyester high performance bonding paste. It is a non-sagging, filled compound, specifically designed for the assembly and bonding of GRP moldings. This highly thixotropic polyester can also be used on timber and plasterboard.

Crystic® Isophthalic Brush Gelcoat LS 88PA is an isophthalic gelcoat. It is pre-accelerated and formulated for brush application and is recommended for use in all markets including marine, land transport and building applications. It is also suitable for general molding requirements.

Crystic® Polyester Resin 489PA is a pre-accelerated, thixotropic, isophthalic polyester resin. When used with Crystic® Marine Grade Gelcoats such as LS 88PA, LS 97PA, LS 30PA, LS 31PA, and Permabright, it gives outstanding durability and superior blister resistance for molding boat hulls. This product is suitable for use with continuous rovings, carbon fibers, and aramids. It has a 23-minute gel time, Lloyd's approval, and is suitable for marine, transportation, building and construction, and industrial applications.

Crystic® Isophthalic Sandable Gelcoat 45PA is an isophthalic sandable gel coat that is filled, pre-accelerated, and formulated for spray application. This product provides an excellent surface finish and base for post-painting. It is specially designed for applications that are to be post-painted.

Crystic® Pipe Relining Resin D3846SA is a thixotropic, non-accelerated, isophthalic, unsaturated polyester resin with low exotherm. It is specially designed for the production of liners to be used in the pipe relining industry. The fully cured liners offer high chemical resistance and mechanical properties.

Crestafix® 621CC 85 Bonding Paste is a pre-accelerated urethane acrylate/ isophthalic polyester high performance bonding paste. It is a non-sagging, filled compound, specifically designed for the assembly and bonding of GRP moldings. This highliy thixotropic polyester can also be used on timber and plasterboard.

Crystic® Polyester Resin 397PA is a pre-accelerated isophthalic/neopentyl glycol polyester resin with a high heat deflection temperature and good water and chemical resistance. It is recommended for the fabrication of high-performance laminates for critical applications in aggressive environments. This product is suitable for contact molding and filament winding processes.

Crystic® Ultra-Low Styrene Ecogel S1PA is an ultra-low-styrene-content spray gel coat. This market-leading, unique technology spray gel coat has only 16% styrene content, which cuts styrene emissions by over 55%. It is suitable for use in industrial and general-purpose applications in transport, building, and industrial markets. This product is also used for the manufacture of wind turbine blades.

Crystic® Isophthalic Spray Gelcoat GT-900 is a high performance isophthalic gelcoat, filled, pre-accelerated and formulated for spray application. It has been developed to have excellent intrinsic water and weather resistance. The viscosity profile ensures even coverage with minimal drainage and low film porosity. This product is recommended for use in the marine, building and transport industries. It is also suitable for general molding requirements.

Crystic® Polyester Resin 625PA is a thixotropic, tough, pre-accelerated isophthalic polyester resin with good heat and chemical resistance properties. It can be used in filament winding applications and is ideally suited for the production of heat-resistant and dimensionally stable molds. This product has a 20-minute gel time.

Crystic® Transfer Moulding Resin 783PA is a pre-accelerated, isophthalic polyester resin, designed for use in RTM (Resin Transfer Molding). It is a versatile resin, with good mechanical properties and impact resistance, recommended for the manufacture of mouldings for use in structural, high performance applications.

Low Styrene Crystic® Ecogel S4PA is a lower cost option, suitable for industrial applications (not Marine) where users are looking for an industrial option with low styrene content (23% styrene content). It is a high performance isophthalic gelcoat. This gelcoat is pre-accelerated and formulated for spray application.

Crystic® Resin PD10031PA – 01 is an acrylic-modified, UV-stabilized, high-quality, isophthalic neopentyl glycol unsaturated polyester resin. This product has been developed specifically for the casting of solid surfaces, where the applications can range from sanitary ware to vanity units to worktops. It is a low-color polyester resin designed to accept the maximum level of filler, such as aluminum trihydride (ATH) and colored chips or ground natural stone.

Crystic® Isophthalic Brush Gelcoat 80PA is an isophthalic, industrial-grade, white-pigmented, pre-accelerated gel coat that is designed for hand lay-up. This product is most suitable for all general molding requirements. It has been designed for application by brush, which yields good coverage, flow, and leveling properties.

Crystic® Isophthalic Brush Gelcoat 65PA is a general purpose Isophthalic brush gelcoat used successfully globally across all market sectors for years. Molders choose this gelcoat over competitive products because of its exceptional handling properties in production, good flexibility, good gloss and ease of repair.