Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
Applications & Uses
- Markets
- Plastics & Elastomers Processing Methods
- Use Level
- 4 - 15 phr
- Recommended Applications
STRUKTOL HT 207 is a processing additive for applications in natural and synthetic rubber.
As a blend of relatively polar fatty acid derivatives STRUKTOL HT 207 acts in non-polar elastomers predominantly as an external lubricant and release agent, since it has the tendency to accumulate at interfaces, this resulting in reduced friction and tackiness. In practice, this effect shows as improved extrusion rate and reduced mill roll sticking.
Due to its specific composition the product softens readily and can easily be incorporated at temperatures above 65°C.
In polar rubbers such as NBR the internal lubrication is to the fore resulting in a reduction of compound viscosity.
Due to its pronounced surfactant character STRUKTOL HT 207 is strongly adsorbed to fillers thus supporting filler dispersion and breaking up of filler agglomerates. This does not only lead to improved compound homogeneity but also to reduced compound viscosity. The effect is naturally strong with the polar mineral fillers.
Since STRUKTOL HT 207 has a certain alkalinity, it has an activating effect upon the sulfur cure. When too fast scorch is observed in individual cases, addition of a suitable retarder (e.g., N-Cyclohexylthiophthalimide) should be taken into consideration.
STRUKTOL HT 207 has particularly been developed from environmental aspects and contains no heavy metals. In many applications it can replace zinc soaps previously used as processing additives and thus it is an important contribution to the currently demanded reduction of the zinc content of rubber compounds.
STRUKTOL HT 207 is suitable for the application in rubber compounds intended for the manufacture of articles in contact with food according to 21 CFR 177.2600 (FDA).
Properties
- Physical Form
- CLTE - Transverse (-22 to 86°F)
- Beige to plae Yellow pastilles
- Appearance
- Beige To Plae Yellow Pastilles
- Typical Properties
Value | Units | Test Method / Conditions | |
Bulk Density | 600.0 | kg/m3 | - |
Density | 1060.0 | kg/m3 | - |
Melting Point | 65.0 | °C | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Packaging Type
- Regional Availability
Storage & Handling
- Shelf Life
- 24 Months
- Storage and Packaging
Storage Stability :
At least 24 months under normal conditions (store in a dry place)
Packaging :
20 kg bags