Products

ECP 9906 is Conductive Glass Fiber Filled Polyphenylene Sulfide Carbon Nanotube Compound Injection Molding proprietary TBA ECP injection molding compound utilizing multi wall carbon nanotube technology to give a permanently conductive material. Special compounding techniques at low filler loadings ensure the retention of physical properties and excellent cleanliness. ECP 9906 is a very high performance thermoplastic with a very high modulus and strength plus a very high continuous service temperature (240°C, short term exposure up to 270°C). It is inherently flame retardant (UL 94 V0), has very good chemical and oxidation resistance, very low water absorption and very low creep, even at elevated temperatures.

ECP 280 is a magnetic compound based on special blends of magnetic additive compounded into TPE in such a way as to optimize physical and magnetic properties during processing. Normally supplied blue.

Permanently anti-static dissipative colourable PP. Suitable for injection molding and extrusion. Compliant with ATEX requirements and BS IEC 61340-5-1:2007. It is an injection molding compound utilizing a special non-migratory additive system to give a permanently anti-static dissipative material. The material is specially designed for applications requiring static control such as electronic safe handling areas and hazardous environments.

ECP 573/JSF180/4124 Permanently Conductive Transparent Graphene Hybrid Acrylic Paint sprayable acrylic paint. It is a single component permanently conductive clear acrylic coating that provides effective static elimination for electronics safe handling area and explosive atmosphere applications. Fully compliant with BS EN 61340- 5.1:2007 and ATEX. It contains carbon nanotubes, a graphene derivative.

ECP 539 Static Dissipative Treatment (Bulk) for ESD (electrostatic discharge) protection. It is a special polymeric static dissipative treatment and cleaner designed to dissipate high static potential quickly as well as prevent their build-up. The high molecular weight of ECP 539 helps to provide effective and long-lasting treatment for any surface and most materials. A light spray of ECP 539 will make most surfaces static dissipative thus providing static safe areas for a wide variety of uses.

ECP 16E is a stainless steel fiber masterbatch within a Nylon 6/12 binder, 25% by weight. It can be used with Nylon 6, 6/6, 6/10, 6/12, PBT, PET.

ECP 502 JSF023 EMI Shielding Nickel Acrylic Paint single component Nickel/Acrylic conductive coating concentrate provides effective EMI shielding on plastic housings used in the electronics and computer industries. ECP 502/JSF023 EMI Shielding Nickel Acrylic Paint is a single component nickel acrylic conductive coating concentrate that provides effective EMI shielding on plastic housings used in the electronics and computer industries.

ECP 535 Static dissipative colored acrylic coating is a single component colored acrylic dissipative coating that provides effective anti-static control on plastic housings used in the electronic and computer industries.

ECP 245 Colourable Magnetically Detectable Nylon 6 compound for injection molding and extrusion. ECP 245 is a colourable magnetic compound based on special blends of magnetic additive compounded into Nylon 6 in such a way as to optimize physical and magnetic properties during processing. Used in the food processing industry where detection of foreign body contamination is to be avoided.

ECP 526 Anti Static Conductive Two Pack Epoxy Paint is a high quality waterborne two-pack epoxy system. Environmentally friendly, it offers the advantages of low odor and easy cleaning of equipment with water.

ECP 592 Permanently Conductive Graphene Hybrid Clear Acrylic Coating Aerosol. It is a Single component permanently conductive graphene hybrid clear acrylic coating that provides effective static elimination for electronics safe handling area and explosive atmosphere applications. Fully compliant with BS EN 61340-5-1:2007 and ATEX. Contains carbon nanotubes and graphene derivatives.

ECP 537 static dissipative high-temperature paint is a single component static dissipative silicone/acrylic coating that provides excellent anti-static protection in addition to its anti-corrosion properties. Continuous heat resistance is provided up to 3500C. Used in areas where ESD (electrostatic discharge) is to be avoided.

ECP 41899 is a proprietary injection molding compound utilizing special polymer alloys to give a permanently anti static dissipative material. The material is specially designed for applications requiring static control and good optical qualities eg, transparency.

ECP 505 EMI Shielding Silver Plated Copper Paint Is supplied ready for use, it is designed to give low resistance in thin film thickness, and exhibits excellent EMI shielding and grounding properties displaying excellent adhesion to most plastics and is ideal for electronic equipment housing. It exhibits excellent long term shielding and grounding properties while providing an esthetically pleasing appearance.

ECP 575/JSF182/182 Permanently Conductive Clear Two Pack Water-based Epoxy Graphene Paint for use in the electronics industry where ESD (electrostatic discharge) is to be avoided, ECP 575/JSF182/182 is a high quality waterborne two-pack epoxy system. Environmentally friendly it offers the advantage of low odor and easy cleaning of equipment with water. ECP 575/JSF182/182 finds applications in such areas as floor coatings, particularly where the previous coating is unknown as solvent will attack many coatings causing them to lift.

ECP 9303 is Conductive PC/ABS Carbon Nanotube Compound Injection Molding proprietary TBA PS injection molding compound utilizing multi wall carbon nanotube technology to give a permanently conductive material. Special compounding techniques at low filler loadings ensure the retention of physical properties and excellent cleanliness.

ECP 526 'Extra' Conductive Water-based anti-slip epoxy. ECP 526 'Extra' is high-quality water borne two pack epoxy system. Environmentally friendly, it offers the advantages of low odor, and easy cleaning of equipment with water and anti-slip properties. Additionally, the coating has an advantage over conventional anti-slip coatings as it can be applied by virtually any method, including spraying. It is very esthetically appealing as it is made without the traditional additives used in anti-slip coatings such as grit and metal shards and provides a silky matte finish.

ECP 12E is a stainless steel fiber masterbatch within an emulsion-based ethylene acrylic acid zinc ionomer binder, 25% by weight. It can be used with Styrenic Thermoplastics, PS, SAN, ABS also PPO and PPE Alloys, Polypropylene/Polyolefines.

ECP 110 Anti Static High Impact Conductive Polypropylene is a conductive Polypropylene based on Conductive Carbon Black and Polypropylene co-polymer suitable for injection molding and profile extrusion. It is designed to comply with the electrical conductivity requirements laid out in Defense Standard 59 - 98 (1979) and BS IEC 61340-5-1-2007 for the protection of electronic components from electrostatic damage.

ECP 9603 Conductive PC/PBT Carbon Nanotube Injection Molding Compound. ECP 9603 is a proprietary injection molding compound utilizing multi-wall carbon nanotube technology to give a permanently anti-static, conductive material. Special compounding techniques at low filler loadings ensure the retention of physical properties and excellent cleanliness.

ECP 2747 is a proprietary TBA injection molding compound utilizing a special non-migratory additive system to give a permanently static dissipative material. The material is specially designed for applications requiring static control such as electronic safe handling areas and hazardous environments where anti static and ESD (electro static discharge) is required.

ECP 145/4332 Anti Static Conductive Nylon 6 Injection Molding Compound for injection molding and extrusion applications, Injection molding compound based on Nylon 6 and special conducting Carbon Blacks. The compound has been specially formulated with impact modification to provide a compromise of strength with the electrical conductivity requirements laid out for materials in BS IEC 61340-5-1:2007 and DEF Std 59-98.

ECP 536 Highly Conductive Flexible Polyurethane Coating. ECP 536 conductive flexible polyurethane is for use in applications where a highly conductive, anti-static surface is required on a flexible surface eg, P.U. elastomer, PVC, rubber variants, fabrics, leather etc.

ECP 121/1015 is a permanently electrically conductive thermoplastic based on EVA and LDPE, specially formulated to give very high conductivity with a high degree of flexibility. The compound is suitable for injection molding, profile extrusion and sheet extrusion applications, which require good flexibility and high impact properties. The compound meets the specifications laid down for handling static sensitive devices in BS IEC 61340-5-1:2007 and ATEX regulations. Low level emi shielding is also attained.

ECP 552 EMI Shielding Nickel Acrylic Aerosol coating combines EMI shielding properties with a convenient method of application for prototype, design and touch-up work; it is specially formulated in order to prevent settling and to provide a homogeneous finish.

ECP 104/4264 Conductive Polypropylene Injection Molding Compound - Low Resistance is a proprietary TBA injection molding compound utilizing special carbon black and mineral filler to give a permanently highly conductive, anti static material. The compound is designed to comply with the electrical conductivity requirements for materials laid out in Defense Standard (59-98) and BS IEC 61340-5-1:2007.

ECP 585 Static Dissipative aerosol coating paint. ECP 585 is a single component, light gray colored acrylic paint in aerosol form to provide a convenient method of application for prototype, design and touch-up work in order to give anti-static properties to products used in the electronics industry. It is specially formulated to minimize settling and to provide a homogeneous finish.

ECP 9905 is Conductive Glass Fiber Filled Polyphenylene Sulfide Carbon Nanotube Compound Injection Molding proprietary TBA ECP injection molding compound utilizing multi wall carbon nanotube technology to give a permanently conductive material. Special compounding techniques at low filler loadings ensure the retention of physical properties and excellent cleanliness. ECP 9905 is a very high performance thermoplastic with a very high modulus and strength plus a very high continuous service temperature (240°C, short term exposure up to 270°C). It is inherently flame retardant (UL 94 V0), has very good chemical and oxidation resistance, very low water absorption and very low creep, even at elevated temperatures.

ECP 531 Conductive carbon acrylic paint is a single component, air-drying, carbon/acrylic costing. The paint is formulated to apply to most plastic substrates and is used in applications where anti-static and ESD (electrostatic discharge) protection is required.

ECP 555 silver/copper aerosol combines the EMI Shielding properties with a convenient method of application for prototype and touch up work. It is designed to give low resistance in thin-film thickness displaying excellent adhesion to most plastics it is ideal for electronic equipment housing. It exhibits excellent long term shielding and grounding properties whilst providing an esthetically pleasing appearance.

ECP 574/JSF181/4125 Permanently Conductive Clear Flexible Polyurethane Graphene Paint.

ECP 581 is a single component black colored acrylic paint in aerosol form to provide a convenient method of application for prototype, design and touch-up work for the electronics industry where anti-static and ESD (electrostatic discharge) protection is required. It is specially formulated to minimize settling and to provide a homogeneous finish.

ECP 538 Static Dissipative Stoving Enamel for ESD (electrostatic discharge) protection. It is a high performance, rapid curing, high build stoving enamel for static dissipative applications. It combines excellent color and gloss retention together with good physical properties. It is suitable for most applications where it offers fast production turnaround combined with economy and good technical properties.

ECP 104 Anti Static Conductive Polypropylene is a proprietary injection molding compound utilizing special Carbon Black and mineral filler to give a permanently conductive material. The compound is designed to comply with the electrical conductivity requirements for materials laid out in Defense Standard (59-98) and BS EN 61340-5-1: 2007

ECP 9703 is Conductive Polycarbonate Carbon Nanotube Compound Injection Molding proprietary TBA PS injection molding compound utilizing multi wall carbon nanotube technology to give a permanently conductive material. Special compounding techniques at low filler loadings ensure the retention of physical properties and excellent cleanliness.

ECP 9602 is Conductive PC/PBT Carbon Nanotube Compound Injection Molding proprietary TBA PS injection molding compound utilizing multi wall carbon nanotube technology to give a permanently conductive material. Special compounding techniques at low filler loadings ensure the retention of physical properties and excellent cleanliness.