Products

Toray Toray MicroPly™ TCF4045 is a low dielectric, low density epoxy syntactic film. The material displays both good mechanical and dielectric properties. Toray MicroPly™ TCF4045’s base resin chemistry features low moisture absorption with good high temperature properties. 177°C (350°F) Cure, Low Dielectric Epoxy Syntactic Film.

Toray Nomex® Honeycomb Core—Aerospace Grade is manufactured from Nomex® paper sheets and is coated and bonded together with a phenolic resin. Designed to offer users and designers high strength-to-weight properties at relatively low cost, Nomex® honeycomb is particularly suitable as a core material for production of sandwich structures requiring significant FST performance and using high performance fiber reinforced composites as the facing material.

Toray TC410 is Toray’s newest high performance cyanate ester resin system designed specifically for the latest generation of radomes and satellite structures. TC410 is unique in that it allows for low stress cures at 121°C (250°F) while achieving extremely low moisture absorption and high conversion levels. The lower cure temperature allows for lower stress in part fabrication. TC410 possesses all the key attributes for satellite use with good resistance to atomic radiation, low microcracking, and excellent resistance to process moisture. TC410 possesses low dielectric and loss tangents for radome usage. 121°C (250°F) Cure Toughened Cyanate Ester Resin System

Toray Toray Cetex® TC930 is a thermoplastic composite using a high density polyethylene (HDPE) matrix. This product is commonly used in pipe overwrapping Applicationss because of its high hoop strength, low modulus, and excellent chemical resistance. Toray Cetex® TC930 is available in a pigmented glass-reinforced tape. Indefinite at 25°C (77°F).

Toray EX-1515 cyanate ester prepreg resin system is unique in the industry in that it is able to achieve an extremely high level of cure conversion after a 121°C (250°F) cure. This level of conversion provides optimal mechanical properties, high radiation resistance, low moisture absorption, and low outgassing while retaining unparalleled toughness, a low 118°C (244°F), stress-free temperature, and long out time. The resin system excels in its ability to resist microcracking, even when subjected to thermal cycling and high levels of radiation exposure. EX-1515 also displays low dielectric and low loss values which makes it outstanding for radome and antenna Applicationss. EX-1515 can be post cured, freestanding, to increase thermal performance for temperature-critical structures. 107–121°C (225–250°F) Cure Toughened Cyanate Ester

Toray Toray AmberTool® HX42 is a low temperature curing epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 190°C (374°F) is achieved. Toray AmberTool® HX42 is an exceptional and very well proven system that exhibits a high end use temperature and extended out life. 50–75°C (122–167°F) Low Temperature Curing Epoxy Tooling Prepreg.

Toray Nomex® Honeycomb Core—Commercial Grade is manufactured from Nomex® paper sheets and is coated and bonded together with a phenolic resin. Designed to offer industrial users and designers high strength-to-weight properties at relatively low cost, Nomex® honeycomb is particularly suitable as a core material for production of nonmetallic sandwich structures using high performance fiber reinforced composites as the facing material.

Toray Toray MicroPly™ ES72A-2 is a 125°C (257°F) curing low-density, expanding, unsupported, epoxy syntactic core. ES72A-2 offers reduced processing, a one-shot cure, the ability to anchor inserts or fastenings, and increases the opportunity to consider lightweight, thin-walled composite sandwich structures. ES72A-2 can be easily contoured and shaped. Toray MicroPly™ ES72A-2 expands using a closed cell process ensuring complete homogeneous cell structure, the density/strength may be altered simply by changing cure pressure or limiting the volume available for expansion, the material is capable of expanding up to 650%. Toray MicroPly™ ES72A-2, formerly Amspand, is available in a variety of thicknesses down to 1 mm, and is supplied in sheets (625 mm x 400 mm).

Toray Toray Cetex® TC910 is a thermoplastic composite using a polyamide 6 (PA6) matrix resin. This product provides excellent mechanical performance at a good price-to-weight ratio. It features high strength and wear resistance and performs well at elevated temperatures. TC910 is also resistant to solvents. As a result of these attributes, Toray Cetex® TC910 is commonly used in a variety of automotive and transportation Applicationss. Secondary details in the final part may be injection overmolded using injection-grade polyamides. Toray Cetex® TC910 is available in glass or carbon reinforced UD tapes. Nylon 6-based Thermoplastic Composite. Indefinite at 25°C (77°F).

Toray BT250E-1 resin system is a 121°C (250°F) cure epoxy prepreg system with excellent toughness and strength. It provides an outstanding surface finish under vacuum-bag/oven-cure only. The resin system, which is self-adhesive to honeycomb and foam core, is MIL-R-9300 qualified and makes a great choice for many Applicationss in the low-tomedium-service temperature range.

Toray Toray MicroPly™ TCF4050 core splice adhesive is a cyanate ester-based core splice with flatwise tensile strength up to 260°C (500°F). This product has been developed to be compatible with the high temperature Toray TC420 and Toray EX-1505 prepreg resin systems. 177°C (350°F) Cure, Cyanate Ester Core Splice Adhesive.

BTCy-1 is a 177°C (350°F) curing cyanate ester and is an industry standard for use on satellite structure and radomes. 177°C (350°F ) Cure Cyanate Ester.

Toray Toray Cetex® MC1322 New is a thermoplastic bulk molding compound (BMC) fabricated from Toray Cetex® TC1320 PEKK thermoplastic uni-directional tape. It is based on a semi-crystalline PEKK thermoplastic polymer and as such has excellent resistance to chemicals and solvents, while also offering excellent elevated service performance, good hot/ wet strength, and offers superior performance in flammability properties. Toray Cetex® MC1322 PEKK is offered on standard-modulus carbon fibers in lengths of up to 25.4 mm (1”). Intermediate modulus fibers and alternative lengths may also be available. Thermoplastic bulk molding compound allows part fabrication with short cycle times. This product also allows complex shapes to be made with varying wall thicknesses, integrated ribs, and reinforcing structures. Compression molded parts are used to replace metal parts for weight savings.

Toray RS-36 is an advanced modified epoxy system for structural composite Applicationss. RS-36 offers an excellent balance of mechanical properties, low moisture absorption, high glass transition temperatures, and a range of processing options. A higher Tg version, RS-36-1, with similar mechanical properties, is available. 177°C (350°F) Cure Epoxy Resin System

Toray RS-50 is a toughened low viscosity epoxy RTM resin. It features a long 4-hour pot life and a low minimum viscosity for excellent RTM and VARTM processing. It can also be used in wet winding Applicationss. 177°C (350°F) Curing Epoxy RTM Resin

Toray Toray MicroPly™ TCF4035 is a syntactic film compatible with 121°C (250°F) epoxy prepregs. It features a 30-day out time and is offered in a density of approximately 0.6 g/cc (40 ± 4 pounds per cubic foot). It features a higher service temperature than Toray TCF4025. Syntactic Epoxy Film.

Toray Toray Cetex® TC1200 is a high-end thermoplastic composite material, utilizing the semi-crystalline thermoplastic polymer PEEK for excellent mechanical performance. The long-standing use of PEEK in demanding Applicationss such as aerospace and cutting edge medical Applicationss proves its benefits and versatility. As a composite material it offers outstanding mechanical performance, also at elevated temperatures. The semi-crystalline nature of the resin ensures an excellent resistance to chemicals and solvents, and an equally superior performance in flammability properties. Toray Cetex® TC1200 is available in UD tape, fabric prepreg, and RTL formats (reinforced thermoplastic laminate). RTLs can be equipped with lightning strike protection, and carbon reinforced RTLs can be supplied with a thin glass top layer to protect a partly metallic assembly against galvanic corrosion. Glass scrim is also applicable in structures made from UD tape. PEEK (PolyEtherEtherKetone) Thermoplastic Resin System.

Toray E745 is a 135°C (275°F) cure toughened epoxy component prepreg. E745 has been developed for impact structures and other mechanically demanding structural Applicationss. E745 can be impregnated into a range of fiber and fabric types. 135°C (275°F) Cure Mid Temperature Curing Toughened Epoxy Component Prepreg.

Toray Toray MicroPly™ EX-1541 cyanate ester syntactic foam is extremely unique in the industry due to its coupling of extremely low density and good structural properties. If packed well, the material does not require pressing during cure to achieve its mechanical properties and is easily machined to shape if required. Toray MicroPly™ EX-1541 is simply packed or injected into tooling cavities and can also be extruded with the proper tooling. Toray MicroPly™ EX 1541’s inherently low dielectric/low loss performance makes it ideal for radomes, antennas, and radar transparent structures, while its cyanate ester backbone chemistry assures low moisture absorption and low outgassing. These latter two features coupled with Toray MicroPly™ EX-1541’s low isotropic CTE make it ideal for spacecraft and other dimensionally stable structures and tooling. Toray MicroPly™ EX-1541 can be accurately machined and hand-finished. Sanding and fairing is easily performed on cured Toray MicroPly™ EX-1541 and is similar to working with balsa wood. Variants from 176–384 kg/m³ (11–24 lb/ft³) (pcf) are available.

Toray Toray AmberTool® HX50 is a low temperature curing epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 180°C (356°F) is achieved. Toray AmberTool® HX50 achieves an excellent surface finish for small to medium sized autoclave tooling. 40–55°C (104–131°F) Low Temperature Curing Epoxy Tooling Prepreg.

Toray’s TC250 offers an excellent balance of toughness, mechanical properties, and hot/wet performance. It is easily processed via vacuum bag/oven, autoclave, or press curing operations. Although TC250 is a 130°C (265°F) cure system, it can be post cured for a higher dry and wet Tg, which enhance the product’s elevated temperature performance. TC250 can also be cured or freestanding post cured to 177°C (350°F) to increase its high temperature performance. TC250 is available with virtually all fiber reinforcements in uni-directional tape, slit unidirectional tape, woven, and non-woven prepreg forms. 130°C (265°F) Cure, Toughened Epoxy Resin System

Toray Toray Cetex® MC1200 is a thermoplastic bulk molding compound (BMC) based upon Cetex TC1200 PEEK thermoplastic uni-directional tape. Toray Cetex® MC1200 is offered on standard-modulus fibers lengths of up to 25.4 mm (1”). Intermediate modulus fibers and alternative lengths may also be available. Thermoplastic bulk molding compound allows part fabrication with short cycle times. This product allows complex shapes to be made with varying wall thickness, integrated ribs, and reinforcing structure. Many composite compression molded parts are used to replace metal parts for weight savings or they replace plastic injection molded parts where higher strengths or stiffness are required. Toray Cetex® MC1200-4A, PEEK, 25.4 mm (1”) represents standard-modulus AS-4 fiber chopped to 25.4 mm (1”) in length.

Toray Toray Cetex® TC960 is a polypropylene-based thermoplastic uni-directional tape. It is part of Toray’s CFRT® (continuous fiber reinforced thermoplastic) line of industrial thermoplastic composites. This thermoplastic composite is designed for Applicationss that require high impact resistance, but where cost is a factor. The impact toughness of glass fiber/ polypropylene composites make them ideal for use in truck bodies, vehicles, and vehicle enclosures. Polypropylene Thermoplastic Composite. Indefinite at 25°C (77°F).

Toray C640 is a cyanate ester resin system suitable for curing between 70°C (158°F) and 135°C (275°F). The medium viscosity resin is pre-impregnated into high-performance fibers such as carbon, glass and aramid. The system is capable of withstanding very high temperatures and is inherently flame-retardant. After a suitable post cure, the glass transition temperature can be increased to as high as 335°C (635°F).

Toray Toray Cetex® TC1000 Premium is a high-end thermoplastic composite, utilizing the amorphous PEI polymer for outstanding toughness and an inherently outstanding fire, smoke, and toxicity performance (< 15/15 OSU). With over 30 years in flight, Toray Cetex® TC1000 Premium is utilized in a consistently growing number of Applicationss. The material has gained a wide array of qualifications at Airbus, Boeing, and many other airframe OEMs. Compared to its semi-crystalline counterparts, Toray Cetex® TC1000 Premium can be used to achieve even shorter cycle times in part production. The material exhibits a superior bondability, which makes it very suitable for hybrid assemblies consisting of different materials. Toray Cetex® TC1000 is available as a UD tape and as a fabric prepreg, but is typically supplied in pre-consolidated reinforced thermoplastic laminates (RTLs) of varying thicknesses. Laminates and prepregs are available in black, cream white, gray, and natural (amber) resin colors. PEI (PolyEtherImide) Thermoplastic Resin System.

Toray MS-1A is a high performance carbon fiber/epoxy resin compression molding system based on high-modulus carbon fiber. MS-1A compression molding compound yields unparalleled stiffness and high strength. MS-1A is qualified for space Applicationss. 138°C (280°F) Cure High-Modulus Compression Molding System

Toray E721-FR is a modified epoxy resin system of medium viscosity for cures at 120°C (248°F), pre-impregnated into high performance fibers such as carbon, glass, and aramid. Toray E721-FR offers excellent structural properties, flame retardancy, and exceptional toughness allowing direct lamination to honeycomb without the use of resin film. Toray E721-FR is designed for structural Applicationss in the motor racing, marine industries, and for a wide range of engineering Applicationss. If fire-retardant properties are not required, consult separate data sheet for Toray E720.

Toray E731 is a toughened epoxy resin system designed to deliver enhanced resin clarity for cosmetic components within high performance automotive. The resin formulation ensures that components are free from white-spots and exhibit high clarity.

Toray EX-1545 is a 2-part highly modified, tough cyanate ester resin formulated to have extremely low viscosity at room temperature. The low viscosity allows RTM processing with minimal heat to the resin, which extends resin pot life and mold filling time for difficult and/or large RTM’d structures. EX-1545 displays both excellent mechanical and thermal properties in addition to low moisture absorption. Finally, the material is unique in that it develops full mechanical properties from its initial 177°C (350°F) cure. 177°C (350°F) Curing Toughened Cyanate Ester for RTM Applicationss

Toray TC346 is a high temperature epoxy component prepreg developed for structural Applicationss within Formula 1 and high performance automotive. Toray TC346 is designed to deliver enhanced compression properties to manufactured parts while maintaining a good fracture toughness. When exposed to elevated temperature environments, TC346 composites demonstrate excellent retention of mechanical performance.

Toray Toray MicroPly™ SF-4 is a BMI syntactic film that provides excellent elevated temperature properties and compatible to Toray RS-8HT. Toray MicroPly™ SF-4 is available in unsupported or supported continuous film form in various thicknesses from 0.25–2.5 mm (10 mils– 100 mils). Toray MicroPly™ SF-4 has been evaluated and qualified in aerospace structures. 204°C (400°F) Cure BMI Syntactic Film. Film to 127 cm (50”) wide.

Toray Toray Cetex® TC925 FST is a value-oriented engineered thermoplastic composite, utilizing a polycarbonate compound for impact toughness and good fire resistance. Although Toray Cetex® TC925 FST is a cost-effective material to begin with, the real cost saving on a part level lies in streamlining production with < 3 minutes per automated process cycle, cutting out most manual postprocessing and potential for error. Additionally, this material offers a very good surface quality. Toray Cetex® TC925 FST is available as a fabric prepreg, but is typically supplied in pre-consolidated reinforced thermoplastic laminates (RTLs) of varying thicknesses and lay-ups. Laminates from natural color resin have a translucent quality. A white color option is also available. PolyCarbonate (PC) Thermoplastic Resin System.

Toray Toray AmberTool® HX32-1 New is an epoxy composite tooling prepreg. After a suitable post cure, an end use temperature of 140°C (284°F) is achieved. Toray AmberTool® HX32-1 prepreg is ideal for large tooling Applicationss. 65–80°C (149–176°F) Curing Epoxy Tooling Prepreg.

Toray Toray Microply™ TC235SF-1 is a composite surfacing film designed to provide paintable composite surfaces off of the tool. It may be cured under vacuum-only pressure or under low autoclave pressure. The surfacing properties of Toray MicroPly™ TC235SF-1 allow smooth, paintable surfaces, even with thin-skinned honeycomb-stiffened composite structure. Epoxy Surfacing System 121°C–177°F (250°F–350°F).

Toray Toray CFRT® TL-2100 consist of the same composition resin, carbon fiber, and laminate )concept of our proprietary sandwich construction. The carbon fiber (graphite) provides strength, stiffness, and durability. TL-2100 Semi-Flex, Semi-Rigid, Rigid, and Ultra differ only in terms of the volume of carbon fiber used and the thickness of the sheet material. TL-2100’s custom-designed weave provides high-strength carbon fiber in the longitudinal direction of an orthotic.

Toray BTCy-2 is our lowest dielectric cyanate ester prepreg resin system. This resin system is valued in high-energy microwave Applicationss due to the low loss tangent. 177°C (350°F) Cure Cyanate Ester