Products

UBE Nylon 5034 B is a PA6/6.6 copolyamide, produced by continuous polymerization process. It is a high viscosity grade suitable for numerous applications. The grade can be used for cast film and blown film (air cooled)..

UBE NYLON 5034 FDX40 is a high viscosity, nucleated Polyamide 6/6.6 copolymer. The material is suitable for cast film and air-cooled blown film production. Typical application is for shrink bags and pouches.

UBE NYLON 1030 B is a high viscosity, unmodified Polyamide 6 for general application (tubes, film, sheets).

UBE NYLON 1024 JI is plasticized and impact modified, high viscosity Polyamide 6. It is most suitable for application in contact with fuel, such as for multilayer fuel lines.

UBE NYLON 5033 B is a basic, high viscosity Polyamide 6/6.6 grade without any additional modification suitable for a wide field of film and extrusion applications. The grade offers an excellent processability and outstanding properties.

UBE NYLON 7034 T is a high viscosity Polyamide 6/12 copolymer, suitable for small and large diameter monofilament, especially suitable for fishing line (long line and branch line).

UBE Nylon 1022B is a Polyamide 6 (Nylon 6) product. It can be processed by extrusion or injection molding and is available in North America. Typical application: Fabrics/Fibers.Characteristics include: Flame Rated Chemical Resistant Good Mold Release Heat Resistant Impact Resistant UBE Nylon 1022BMedium viscosity (Injection, Extrusion).

UBE NYLON 5033 FDX57 is a high viscosity, nucleated Polyamide 6/6.6 copolymer. It is most suitable for water-cooled blown film production. Typical application is for sausage casing and shrink bags.

UBE NYLON 5034 FDX17 is a high viscosity Polyamide 6/6.6 copolymer containing an anti block agent. The material is especially suitable as outer layer for air-cooled blown film (asymmetric layer structure). Typical applications are for pouches and thermoformed products.

Ubesta™ 3030 XA is a non-reinforced, high viscosity Polyamide 12 most suitable for extrusion application, such as film, including for food application and tubing..

Ubesta™ 3030 U is a high viscosity, non-reinforced and non-plasticized Polyamide 12 preferably for extrusion application. UBESTA 3030 U shows only low moisture absorption and therefore exceptional dimension stability..

UBE NYLON 7034 B is a high viscosity PA6/12 Copolyamide. It is suitable for applications with indirect food contact according FDA and EU regulations. The grade can be used for cast film and blown film (air or water cooled).

UBE NYLON 5034 MTX1 is a medium viscosity Polyamide 6/6.6 copolymer for general application. It is suitable for all sizes of line, which require good softness.

UBE Nylon 1030J is flexibleand used in t-die cast blown process.