Products

ELASTOSIL® LR 3043/40 A/B A/B is a liquid silicone rubber of the ELASTOSIL® LR 3043 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

WACKER® AK 1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 1000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits low surface tension, resulting in high surface activity. Additionally, it is chemically highly unreactive and has a low solidifying point.

HDK® H21 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H21 is used as a thickening and thixotropic agent in various applications such as composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

ELASTOSIL® LR 3003/80 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® Color Paste FL Yellow RAL 1016 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® SOLAR 2205 is a pourable addition-curing RTV-2 silicone rubber suitable for coating, lamination, and encapsulation purposes. The product cures at room temperature and under heat to yield a soft elastomer. Cured ELASTOSIL® SOLAR 2205 offers excellent long-term stability against weathering, moisture, and UV light. The soft silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures up to 160°C (320°F) without damage.

ELASTOSIL® LR 3005/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

SEMICOSIL® 911 A/B is a pourable, two-part silicone rubber that cures to a soft silicone gel through addition-curing. It has a 1:1 mixing ratio and demonstrates thixotropic behavior. This product offers rapid heat curing and forms a soft gel during vulcanization. SEMICOSIL® 911 A/B has a low volatile and uncured polymer content. It maintains almost constant properties within a wide temperature range, from -40 °C to +180 °C. Additionally, it boasts a low ion content.

POWERSIL® 730 A/B is a low-viscosity two-component compound known for its excellent processing properties, high tracking and erosion resistance, as well as outstanding mechanical and electrical properties. It is a ready-to-use system that is very easy to process due to its low viscosity. Additionally, it exhibits excellent dielectric properties and high arcing resistance.

ELASTOSIL® LR 3016/65 A/B is a liquid silicone rubber. It is a paste-like, readily pigmentable, two-component compound with a short curing time. Its vulcanizates are noted for their high oil resistance. It is off-white and has moderate mechanical properties. Thanks to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® SOLAR 2203 is a pourable, addition-curing, RTV-2 silicone rubber used for potting, lamination, and encapsulation purposes. The product vulcanizes at room temperature to yield a very soft silicone gel. ELASTOSIL® SOLAR 2203 displays pronounced inherent tack and excellent long-term stability against weathering, moisture, and UV light. The soft silicone gel can continuously withstand changing climatic conditions, UV radiation, and temperatures up to 160°C (320°F) without damage.

ELASTOSIL® LR 3043/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3043 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

WACKER SilGel® 612 EH A/B is a two-part, pourable, addition-curing RTV-2 silicone rubber. It is a modified version of WACKER SilGel® 612, offering increased hardness and reactivity. With a 1:1 mixing ratio, this product ensures a convenient and precise blending process. It exhibits rapid curing properties and retains a low hardness.

SEMICOSIL® TEOS 999-LB is an ultra-high-purity tetraethoxysilane (TEOS) known for its exceptional chemical purity, very good trace metal purity, and very good purity in terms of boron and chloride. This product has been specifically developed for the semiconductor industry and finds typical applications as a precursor for low-dielectric constant interlayer dielectrics and other related uses.

ELASTOSIL® LR 3005/70 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

HDK® V16 is a synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a standard product widely used in various industrial applications. The product is a white colloidal powder of high purity. HDK® V16 is primarily employed as a thickening and thixotropic agent in silicone sealants. Notably, it exhibits higher thickening efficiency compared to HDK® V15A.

ELASTOSIL® R 401/30 OH US is a colorless, translucent silicone rubber base noted for its flexibility, high transparency, and good mechanical properties. Its vulcanizing characteristics make it possible to achieve rubber moldings by compression, transfer, and injection molding. Post-cured vulcanizates can be used for applications in the health care and food handling industries.

ELASTOSIL® Color Paste FL Orange RAL 2004 F is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® A59 Grey 01 is a self-leveling, one-component, amine-cure formulation that cures at room temperature by reaction with air humidity to form a flexible and durable silicone elastomer. It is particularly suited for screen printing on gaskets. The curing rate can be accelerated by heat exposure or exposure to carbon dioxide concentrations above 1% p.b.v.

ELASTOSIL® Color Paste FL Green Translucent 556 C is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

SEMICOSIL® 9882 A/B is a two-component silicone rubber adhesive that exhibits thixotropic properties and cures at moderate temperatures. It has a thixotropic, pasty consistency, making it easy to apply and work with. This adhesive offers low hardness and low modulus, resulting in excellent compression-set properties and high elongation.

SILPURAN® 6000/05 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/05 A/B is designed for medical applications in compliance with Wacker Silicones' health care policy. Please note that this material has use restrictions according to Wacker Silicone's health care policy. In particular, contact with body tissue or blood is not permitted.

ELASTOSIL® Color Paste FL Ochre Brown RAL 8001 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® Color Paste PT Green RAL 6032 F is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used to produce ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without significant impairment of the physical properties (e.g. hardness) and without migration, as may be observed for systems based on silicone oil.

HDK® H15 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H15 is commonly utilized as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics, and other applications. Additionally, it serves as a reinforcing filler in elastomers, particularly silicone elastomers. Moreover, HDK® H15 functions as a free flow additive in the production of technical powders.

ELASTOSIL® Color Paste PT Green RAL 6017 is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used to produce ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without significant impairment of the physical properties (e.g. hardness) and without migration, as may be observed for systems based on silicone oil.

ELASTOSIL® LR 3001/55 FR A/B is a paste-like, low-inflammable, two-component compound of liquid silicone rubber. The excellent flame retardancy is confirmed by the achieved UL94-V0 listings at 0.75 mm and 3 mm thickness and f1 rating according to UL746C: Unterwriters Laboratories File E75704 (Wacker Chemie AG). It exhibits good heat resistance, high oil resistance, and short curing times, which are further benefits of this material.

VINNAPAS® eco CA 5880 is a sustainable solution that promotes the conservation of fossil resources by enabling the substitution of fossil-based raw materials with certified sustainable renewable feedstock. This substitution process adheres to the REDcert² mass balance approach and is independently audited by a third party. The precise amount of fossil raw material replaced varies depending on the specific product version and is documented in the corresponding certificate.

ELASTOSIL® R Plus 4305/40 is a two-component, high-consistency silicone rubber designed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and good to very good mechanical properties. This fast-curing silicone rubber demonstrates good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.

ELASTOSIL® R 427/30 is a high-strength silicone rubber known for its outstanding transparency, excellent tear strength, and exceptional mechanical properties. It is particularly suitable for the production of extruded profiles. The vulcanizing characteristics of this product allow for short cycle times in the manufacturing of molded articles through compression, transfer, and injection molding processes. Post-cured vulcanizates of this product can be utilized in various applications within the healthcare and food handling industries.

WACKER® AK 30000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 30000 mm²/s. Its chemical structure provides it with exceptional properties that differentiate it from organic materials like mineral oils. Notably, WACKER® AK 30000 exhibits good dielectric properties, making it suitable for applications requiring electrical insulation. Additionally, it has low surface tension, which contributes to its high surface activity.

ETONIS® 1400 S is a polymer dispersion designed for soil stabilization purposes. When applied to the soil, this product creates polymer bridges between the soil or aggregate particles and the hydrated cement particles. These bridges contribute to the formation of a flexible and strong network that is both durable and resistant to water.

ELASTOSIL® Color Paste FL Black RAL 9011 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® Color Paste FL Ivory RAL 090 80 30 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

WACKER® AK 200 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 200.000 mm²/s. It is enhanced with a special heat stabilizer that safeguards the silicone fluid from thermal decomposition and viscosity fluctuations. As a result, WACKER® AK 200 000 STAB is particularly well-suited for applications that entail high temperatures and/or shear stress. It exhibits long-term heat stability, making it suitable for operating temperatures exceeding 150 °C, and it demonstrates high shear stability.

ELASTOSIL® SOLAR 1200 is a non-slump, condensation-curing RTV-2 silicone adhesive designed for the solar industry. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® SOLAR 1200 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can endure constantly changing climatic conditions, UV radiation, and temperatures as high as 180°C (356°F) without damage.