Products

DEHESIVE® 902 AMA® is a solvent-free, addition-curing silicone fluid formulated for release applications on paper and filmic substrates. It is an integral component of a multicomponent release coating used in the production of paper and filmic release liners. These liners are widely utilized in the manufacturing of single- and double-sided industrial laminates.

ETONIS® 1400 S is a polymer dispersion designed for soil stabilization purposes. When applied to the soil, this product creates polymer bridges between the soil or aggregate particles and the hydrated cement particles. These bridges contribute to the formation of a flexible and strong network that is both durable and resistant to water.

SILRES® BS 1316 is used undiluted as a water-repellent primer and impregnating agent for normal and reinforced concrete. It is a mixture of isomeric octyltrimethoxysilanes, with isooctyltrimethoxysilane as the main component. SILRES® BS 1316 is specifically recommended as a water-repellent impregnating agent and primer for normal and reinforced concrete in various applications such as bridges, roads, and buildings.

SILRES® BS 280 is a solvent-free silicone concentrate based on silane or siloxane. It can be diluted with organic solvents. Diluted solutions of SILRES® BS 280 are high-quality water repellents for impregnating mineral building materials, especially silicate-free natural stones like limestone or gypsum. The water-repellent effect develops after application through a reaction with atmospheric humidity.

SILRES® BS 1310 is a solvent-free, water-thinnable emulsion of polysiloxane modified with functional silicone resin. It is an additive used in the production of aqueous masonry coatings and aqueous primers to enhance water repellency and resistance. Additionally, it improves the processability and antiblocking characteristics of the aqueous coatings.

VINNOL® H 40/60 is a copolymer composed of approximately 61 wt.% vinyl chloride (VC) and approximately 39 wt.% vinyl acetate (VAc). Primarily, it serves as a binder for surface coating compounds and printing inks. As a thermoplastic binder, VINNOL® H 40/60 undergoes physical drying, resulting in the formation of a film as the solvent in the formulation evaporates.

SILRES® BS 17040 is a high-quality, water-thinnable silane emulsion that is solvent-free. It is specifically formulated to act as a water repellent for impregnating and priming alkaline mineral surfaces. Additionally, it can be used as a water-resisting admixture for non-load-bearing manufactured concrete products.

DEHESIVE® 944 is a solvent-based, addition-crosslinkable silicone recommended for use as a release coating. It offers excellent release stability, medium release at low peel speeds, excellent bath life, and excellent anchorage to a wide variety of substrates. It can be used for coating polyester films (PET), papers, and PE-laminated papers.

DEHESIVE® 929 is a solvent-free, addition-curing silicone fluid designed for release applications. This product has good curing properties, very good flow properties and coverage, an extremely stable release, excellent bath life, and excellent long-term anchorage to a wide variety of substrates.

SILRES® BS 1802 is an admixture for the integral waterproofing of fresh concrete in its undiluted form. Additionally, it can be utilized as a water-resisting admixture for non-load-bearing manufactured concrete products. SILRES® BS 1802 effectively prolongs the service life of concrete structures by inhibiting the alkali-silica reaction (ASR).

SILFOAM® SE 39 is a low-viscosity antifoam emulsion known for its long-lasting efficiency. It is especially well-suited for surfactant-rich formulations like liquid detergents and textile auxiliaries. SILFOAM® SE 39 is particularly effective in applications where high surfactant concentrations or intense product movement would quickly render conventional antifoam emulsions ineffective.

VINNOL® H 40/43 is a copolymer composed of approximately 66 wt.% vinyl chloride (VC) and approximately 34 wt.% vinyl acetate (VAc). Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes physical drying, resulting in the formation of a film once the solvent in the formulation has evaporated.

ETONIS® 5150 P is a ready-to-use polymer dispersion specifically designed for special concrete applications. It is particularly well-suited for modifying concrete, especially in shotcrete applications for underground construction, tunneling, and mining. The primary applications of ETONIS® 5150 P include concrete protection and concrete repair.

VINNOL® H 40/55 is a copolymer comprising approximately 62 wt.% vinyl chloride (VC) and approximately 38 wt.% vinyl acetate (VAc). Its primary application lies in serving as a binder for surface coating compounds and printing inks. Functioning as a thermoplastic, physically drying binder, VINNOL® H 40/55 undergoes film formation once the solvent present in the formulation has evaporated.

SILRES® BS 280 CF is a solvent-free silicone concentrate based on silane or siloxane. Like SILRES® BS 280, it can be diluted with organic solvents. Diluted solutions of SILRES® BS 280 CF serve as high-quality water repellents for impregnating mineral building materials, particularly silicate-free natural stones like limestone or gypsum. It also develops its water-repellent effect through a reaction with atmospheric humidity.

VINNOL® H 40/50 is a copolymer composed of approximately 63 wt.% vinyl chloride (VC) and approximately 37 wt.% vinyl acetate (VAc). Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes physical drying, resulting in the formation of a film as the solvent within the formulation evaporates.

SILRES® BS 1803 is a solvent-free emulsion based on organo-modified silanes and siloxanes. It is specifically designed to act as a water-repellent admixture for semi-dry concrete and other non-load-bearing cement-based building materials, including paving stones and concrete blocks. SILRES® BS 1803 helps to minimize the amount of water absorbed by the concrete or other cement-based materials, thereby enhancing their durability and resistance to moisture-related issues.

ETONIS® 7445 A is a rapid-setting vinyl acetate-ethylene copolymer with unique properties. Unlike a high-solids version of the ETONIS® series dispersion, it is specially formulated to provide excellent adhesion and cohesion to challenging substrates such as aggregate, base and sub-base material, and asphalt emulsion. Its superior bonding capabilities make it an ideal choice for various applications.

SILRES® BS 1306 is a solventless, water-thinnable emulsion of polysiloxane modified with functional silicone resin. It can also be used as a water-repellent primer, in which case it should be diluted with water at a ratio of 1 part SILRES® BS 1306 to 9 parts water. If the primer is required to strengthen the substrate, we recommend adding a polymer dispersion in hydrosol form.

SILRES® BS SMK 2101 is a solventless silicone microemulsion concentrate based on silanes and siloxanes that is diluted with water to yield a microemulsion. Dilute aqueous solutions of SILRES® BS SMK 2101 are high-quality specialty water repellents for hydrophobic impregnation and priming normal and reinforced concrete, as well as water resisting admixtures for non-load-bearing manufactured concrete products.

VINNAPAS® 530 ND is a construction dispersion for primers, cement admixes, and repair mortars. VINNAPAS® 530 ND is based on a vinyl acetate/ethylene copolymer. It reduces the elastic modulus and enhances adhesion. VINNAPAS® 530 ND is an unplasticized 55% dispersion of a vinyl acetate/ethylene copolymer in water.

ETONIS® 1450 S is a liquid additive designed for soil stabilization. When used in combination with the dispersion ETONIS® 1400 S, the additive ETONIS® 1450 S enhances the performance, especially with soils that have finer particle sizes. To stabilize the soil, ETONIS® 1450 S is added to ETONIS® 1400 S at a dosage of 5 to 10% of the volume of ETONIS® 1400 S, depending on the characteristics of the soil.

VINNAPAS® 4016 N is a hard dispersible polymer powder based on vinyl acetate and ethylene with very good tensile adhesion strength on inorganic surfaces combined with good workability. VINNAPAS® 4016 N was developed for those applications where lower water demand and increased smoothness under the trowel are important.

SILRES® BS 1701 is a mixture of octyltriethoxysilane isomers, with iso-octyltriethoxysilane as the main component. It is used undiluted for the hydrophobic priming and impregnation of concrete and reinforced concrete. Additionally, SILRES® BS 1701 is suitable for the hydrophobic treatment of fillers and pigments.

ETONIS® 5500 P is a versatile dispersible polymer powder designed for concrete and mortar applications, especially suitable for concrete repair mortars, cement admixtures, renders, and plasters. It is formulated with a hard copolymer of vinyl acetate and ethylene, belonging to the ETONIS® P product class. This polymer powder has a neutral effect on rheology and provides essential properties such as adhesion and flexibility, allowing for greater formulation flexibility. ETONIS® 5500 P is a standard offering in our product range, providing a top-quality solution for a wide range of applications.

SILESTER® XAR is a ready-to-use, prehydrolyzed ethyl silicate hybrid binder. The solvent used in SILESTER® XAR is a blend of ethanol and 2-propanol. This product is conveniently prepared and can be directly utilized in the production of ceramic slips, ramming mixes, and anticorrosion paints without any further processing steps.

VINNAPAS® 7055 E is a dispersible polymer powder for dry mix mortars, specifically suited for waterproofing membranes as well as repair mortars. It is based on a very flexible terpolymer of vinyl acetate, ethylene, and vinyl ester. VINNAPAS® 7055 E belongs to the product class VINNAPAS® E, which means that it provides enhanced properties like high tensile adhesion strength, particularly on all substrates, and very good crack-bridging properties even at low temperatures.

VINNAPAS® 5028 E (USA) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives and wall troweling compounds. It is based on a flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® E, which means that it provides enhanced properties, such as extended open time, flexibility, and increased adhesion after water immersion. VINNAPAS® 5028 E (USA) is part of our standard range, offering you the best-in-class solution for a wide variety of applications.

VINNAPAS® 5044 N (GER) is a dispersible polymer powder for dry mix mortars, specifically suited for ETICS, water-proofing membranes, and concrete repair. It is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5044 N (GER) is part of our standard range, offering the best-in-class solution for a wide variety of applications.

SILRES® BS 16040 is a water-dilutable, solvent-free silane emulsion. It is a high-quality specialty product used for the hydrophobic impregnation and priming of alkaline substrates. When applied to construction materials, SILRES® BS 16040 reacts with atmospheric moisture and/or water present in the pores of the building material. This reaction eliminates alcohol and forms an active substance that greatly reduces the absorbency of the concrete within the active zone (penetration depth after post-treatment). Importantly, this reduction in absorbency occurs without blocking any pores or capillaries in the material. As a result of the impregnation, the treated building material retains its high water-vapor permeability, allowing moisture to pass through while still providing excellent protection against water penetration.

ETONIS® 3500 W (GER) is suitable for modifying concrete, specialty mortar, and cementitious coatings for infrastructure products, especially for shotcrete applications in underground construction, tunneling, and mining. It is a polymer powder with a low glass transition temperature (Tg) and remains flexible at temperatures below freezing. It is also suitable for end products with low emissions.

SILRES® BS 1601 is n-octyltriethoxysilane, which is used undiluted as a water-repellent primer and impregnating agent for normal and reinforced concrete. It offers significant benefits such as the reduction of chloride and water absorption by the concrete, minimizing concrete loss due to freeze/road salt attack, and exhibiting low volatility. Once applied to the concrete, SILRES® BS 1601 reacts with atmospheric moisture or pore water present in the concrete, resulting in the generation of the active ingredient. This active ingredient effectively reduces the water absorbency of the treated concrete while maintaining a high level of water vapor permeability. Importantly, the treatment does not block pores or capillaries within the concrete.

SILRES® BS 1801 is a mixture of octyltriethoxysilane isomers, with iso-octyltriethoxysilane as the main component. It is used in its undiluted form as an admixture for the integral waterproofing of fresh concrete. SILRES® BS 1801 is highly recommended as a concrete waterproofing admixture.

ETONIS® 7142 A is a dispersion of vinyl acetate-ethylene copolymer. It possesses a glass transition temperature (Tg) of -15 °C and is specifically designed for use in asphalt emulsion-based applications. This product enhances various properties such as film flexibility, adhesion, and drying time. ETONIS® 7142 A is suitable for modifying both anionic and cationic asphalt emulsions, offering advantages like rapid setting speeds, easy machining, and effortless clean-up.

ETONIS® 7550 A is a versatile dispersible polymer powder designed for various concrete applications, including pervious concrete, concrete repair, cement admixtures, renders, and plasters. It is formulated with a hard copolymer of vinyl acetate and ethylene, categorized under the ETONIS® A product class. This polymer powder has a neutral effect on rheology and offers essential properties such as adhesion and flexibility, allowing for greater formulation flexibility. ETONIS® 7550 A is a standard product in our range, providing a superior solution for a wide range of applications.

VINNAPAS® 5844 E is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS, waterproofing membranes, and concrete repair mortar. It is based on a very flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5844 E is part of our standard range, offering the best-in-class solution for a wide variety of applications.