Products

DEHESIVE® 902 AMA® is a solvent-free, addition-curing silicone fluid formulated for release applications on paper and filmic substrates. It is an integral component of a multicomponent release coating used in the production of paper and filmic release liners. These liners are widely utilized in the manufacturing of single- and double-sided industrial laminates.

VINNAPAS® 920 is a carboxylated, poly(vinyl alcohol) stabilized, vinyl acetate-ethylene (VAE) copolymer dispersion with a glass transition temperature (Tg) of -20 °C. It offers excellent flow, wetting, and adhesion to a wide variety of polymeric films, coatings, and other difficult substrates.

VINNAPAS® CEZ 3031 is a medium-particle-size, protective colloid-containing aqueous dispersion of a terpolymer of vinyl acetate, ethylene, and vinyl chloride. The principal feature of VINNAPAS® CEZ 3031 is its wide range of uses in coating systems containing opacifying pigments. The dispersion is low in odor and is produced without the use of alkylphenol ethoxylate (APEO)-containing compounds.

VINNAPAS® eco EF 3777 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of alkyl phenol ethoxylate (APEO)-containing compounds, organic solvents, or plasticizers. Due to its low VOC content, VINNAPAS® eco EF 3777 is ideal for manufacturing low-emission products.

HDK® H21 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H21 is used as a thickening and thixotropic agent in various applications such as composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

SILRES® BS 68 is a solvent-thinnable silane/siloxane mixture. It is used in diluted form for the hydrophobic impregnation of mineral construction materials and as a primer for mineral substrates. The concentrated product is also employed in the manufacturing of bitumen-bound minerals or as a binder for mineral systems. The product develops its hydrophobic effect through a reaction with atmospheric moisture or water adsorbed onto the pores and capillary walls of the construction material. SILRES® BS 68 is characterized by higher alkali resistance compared to pure methyl silicone resins, and the water vapor permeability of the construction material is only slightly affected.

GENIOSIL® STP-E 10 is a polyether-based silane-terminated polymer suitable as a binder in moisture-curing formulations. It differs from conventional silylated polymers due to its high reactivity, which results from the structural proximity of the nitrogen atom to the silicon atom in the dimethoxy(methyl)silyl-methylcarbamate group (alpha-effect). It hydrolyzes in the presence of moisture to form a stable siloxane network initiated by mild catalysis, rather than heavy metal ions.

SILRES® BS 710 is a permanent anti-graffiti coating designed to protect concrete, masonry, wood, and pre-existing coatings. It is based on polyorganosiloxanes and provides excellent performance against exterior elements such as rain, sun, and temperature extremes. SILRES® BS 710 is a single-component product that cures at room temperature with ambient moisture. The cured coating offers excellent release properties and ease of removal for most permanent markers and aerosol paints.

WACKER® Silicate MKS is an ethyl silicate binder suitable for the formulation of one-pack ethyl silicate zinc-rich primers. These primers are excellent anti-corrosive coatings. WACKER® Silicate MKS is a binder with outstanding anti-setting properties. Paints formulated with it are easy to stir up, even if they have been stored for a long time.

SILRES® KX is a medium-molecular-weight methyl silicone resin that is supplied as a 50 wt.% solution in xylene. Its primary application is as a binder for highly heat-resistant coatings. SILRES® KX can be used effectively as a binder for various types of coatings. It offers exceptional heat resistance and weatherability, and when applied, it dries without being tacky. The resin can also undergo heat curing, further enhancing its performance. SILRES® KX is particularly well-suited for highly-filled coatings, allowing for the incorporation of a high level of fillers while maintaining excellent properties and durability.

VINNAPAS® CEF 52 is a dispersion of a vinyl chloride, ethylene, and vinyl ester terpolymer. It can be used as a binder for coating systems containing an opacifying pigment, such as polymer-modified plasters. The special composition and manufacturing technology mean that VINNAPAS® CEF 52 can be used to formulate very hydrophobic products.

VINNAPAS® SAF 72 is a fine-particle-sized dispersion of a styrene/acrylic acid ester copolymer in water with a solids content of 50%. It is manufactured without using coalescent, organic solvents, plasticizers, or alkyl phenol ethoxylate (APEO)-containing compounds. It exhibits excellent penetration into porous substrates and offers great flexibility.

HDK® T30Plus is a synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® T30Plus is a white colloidal powder of high purity. It finds applications in inkjet paper, makeup, powder coatings, printing inks, and rheology control.

WACKER® Catalyst PT 5 is a specialized platinum catalyst designed for the efficient thermal curing of both solvent-based and solvent-free addition-crosslinking silicones. It is highly active and concentrated, ensuring rapid curing and consistent performance in silicone systems. With its high platinum concentration, this catalyst offers excellent efficiency. Additionally, WACKER® CATALYST OL is miscible with silicones in any proportion, providing versatility and ease of use in various applications.

ELASTOSIL® RD 3151 F is a silicone rubber dispersion used for textile coatings and as a primer for bonding silicone rubber on PEX surfaces. It finds application in industrial textiles. The dispersion offers properties such as high abrasion resistance, easy-to-clean surfaces, and high heat resistance.

GENIOSIL® GF 80 is an epoxy functional alkoxysilane. When used as a coupling agent in mineral-filled plastics, it enhances filler dispersibility, reduces sedimentation tendency, and significantly lowers the resin's viscosity. Moreover, it allows for higher filler loading and provides notable improvements in water (vapor) resistance, as well as resistance to acids and bases. In the realm of adhesives and sealants, incorporating GENIOSIL® GF 80 enhances adhesion to the substrate and improves mechanical properties like flexural strength, tensile strength, and modulus of elasticity.

DEHESIVE® SF 201 AMA® is a solvent-free, addition-curing silicone fluid. It is designed for release applications and is applied with additional components on paper and filmic substrates. The fast cure properties of DEHESIVE® SF 201 AMA® allow for use with temperature-sensitive substrates or comparatively low platinum levels at standard conditions.

VINNAPAS® 536 ED is a versatile polymer dispersion based on vinyl acetate and ethylene with a high solid content. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content is below 1000 ppm. The dispersion is characterized by high bonding strength combined with increased flexural strength and good compatibility with inorganic fillers like CaCO3.

SILRES® BS 310 is a solventless emulsion that can be thinned with water. It consists of polysiloxane modified with a functional silicone resin. This product is specifically designed to be added to aqueous masonry coatings and primers, either during or after their manufacture. When used undiluted, SILRES® BS 310 serves as an additive for aqueous indoor paints or coatings. Its purpose is to enhance the workability of the paint or coating, resulting in improved application properties. This product is highly compatible with indoor paints and has a positive influence on wetting and leveling properties.

SILRES® BS 1310 is a solvent-free, water-thinnable emulsion of polysiloxane modified with functional silicone resin. It is an additive used in the production of aqueous masonry coatings and aqueous primers to enhance water repellency and resistance. Additionally, it improves the processability and antiblocking characteristics of the aqueous coatings.

VINNOL® H 40/60 is a copolymer composed of approximately 61 wt.% vinyl chloride (VC) and approximately 39 wt.% vinyl acetate (VAc). Primarily, it serves as a binder for surface coating compounds and printing inks. As a thermoplastic binder, VINNOL® H 40/60 undergoes physical drying, resulting in the formation of a film as the solvent in the formulation evaporates.

WACKER® Silicate S100 is a ready-to-use ethyl silicate binder with a flash point above 21°C. It is primarily used for formulating single-pack ethyl silicate zinc-rich primers, which are commonly used as anti-corrosive coatings. This product is particularly suitable for applications in marine, protective, and industrial coatings.

VINNOL® H 15/42 is a copolymer consisting of approximately 86 wt.% vinyl chloride (VC) and 14 wt.% vinyl acetate (VAc). Its primary application is as a binder in surface coating compounds and printing inks. This thermoplastic and physically drying binder undergoes film formation as the solvent present in the formulation evaporates.

VINNAPAS® EP 3455 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of alkyl phenol ethoxylate (APEO)-containing compounds. The dispersion offers very high scrub resistance, excellent hiding power, and exceptional pigment binding ability.

SILRES® BS 17040 is a high-quality, water-thinnable silane emulsion that is solvent-free. It is specifically formulated to act as a water repellent for impregnating and priming alkaline mineral surfaces. Additionally, it can be used as a water-resisting admixture for non-load-bearing manufactured concrete products.

DEHESIVE® 944 is a solvent-based, addition-crosslinkable silicone recommended for use as a release coating. It offers excellent release stability, medium release at low peel speeds, excellent bath life, and excellent anchorage to a wide variety of substrates. It can be used for coating polyester films (PET), papers, and PE-laminated papers.

HDK® S13 is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® S13 is a white colloidal powder of high purity. It finds application in inkjet paper and pulp, paper & printing processes.

HDK® H17 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H17 is used as a thickening and thixotropic agent in composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

SILRES® REN 50 is a medium-hard methyl phenyl silicone resin available as a 50 wt.% solution in xylene-butanol (9:1). It is primarily employed as a binder for heat-resistant, anticorrosive coatings. Additionally, SILRES® REN 50 finds extensive use as a binder in various coating applications. It offers exceptional heat resistance and weatherability, ensuring optimal performance in demanding environments. Furthermore, it exhibits fast drying characteristics, forming a tack-free film at ambient temperature.

VINNOL® E 15/45 M is a carboxylate-containing terpolymer consisting of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It functions primarily as a binder in surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

WACKER® Silicate TES 40 WN is an ethyl silicate polymer. It is a low-viscosity liquid that provides approximately 41% of silicon dioxide (silica) upon complete hydrolysis. WACKER® Silicate TES 40 WN is used for the precipitation of polymeric SiO2 structures (silica) upon complete hydrolysis, with ethanol being produced as a by-product.

HDK® H15 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H15 is commonly utilized as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics, and other applications. Additionally, it serves as a reinforcing filler in elastomers, particularly silicone elastomers. Moreover, HDK® H15 functions as a free flow additive in the production of technical powders.

DEHESIVE® 929 is a solvent-free, addition-curing silicone fluid designed for release applications. This product has good curing properties, very good flow properties and coverage, an extremely stable release, excellent bath life, and excellent long-term anchorage to a wide variety of substrates.

HDK® T30 is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® T30 is a white colloidal powder of high purity. It finds application in inkjet paper, make-up, powder coatings, printing inks, and rheology control.

Wacker Chemie Silane M1-Trimethoxy is a clear, colorless liquid with the characteristic odor of alcohols. It is primarily used to provide water repellency to various surfaces and materials, such as mineral fillers, pigments, glass, and cardboard. Additionally, SILANE M1-TRIMETHOXY is employed in the manufacturing of silicone resins and condensation-curing silicone rubber. It also finds application in aqueous sol-gel coating systems to produce organic-inorganic hybrids.

SILRES® BS 54 is a water-dilutable, solventless emulsion of a silicone resin that serves as a binder in the manufacturing of silicone resin emulsion paints and plasters. It is specifically utilized as a binder in silicone resin emulsion paints and renders. When formulated correctly, products incorporating SILRES® BS 54 exhibit desirable characteristics such as high permeability to water vapor and CO2, low water absorption, low susceptibility to soiling, a mineral-like appearance, and an extended lifespan. Additionally, the use of SILRES® BS Additive helps achieve an excellent beading effect. For optimal protection, it is recommended to prime facades before applying paint.