Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Applications
- Interior Paints & Coatings
- Ready-to-use dispersion-based Renders & Plaster
- Application Details
- VINNAPAS® eco EF 3777 is designed to provide outstanding performances in interior paints flat to semi-gloss. Due to its low MFFT and low levels of residual monomers VINNAPAS® eco EF 3777 is especially recommended as binder for environmentally friendly decorative coatings.
- The pigment binding ability is excellent. Hence, even with low amounts of binder high level of abrasive resistance of a coating can be achieved. The use of VINNAPAS® eco EF 3777 enables the production of interior coatings with low odor and free of intentionally added organic solvents, which provide high performance without compromises regarding environmental compatibility.
Properties
- Physical Form
- Typical Properties
- Specifications
- Properties
- Excellent pigment binding ability
- Very good scrub resistance
- Low blocking behavior in silk paint formulations
| Value | Units | Test Method / Conditions | |
| Appearance of the Dispersion Film | Clear glossy | — | Visual |
| Density | approx. 1.07 | g/cm³ | DIN EN ISO 2811-1 |
| Electrolyte Stability | Very good | — | Specific method |
| Filler and Pigment Compatibility | Very good | — | Specific method |
| Minimum Film Forming Temperature | approx. 1 | °C | DIN ISO 2115 |
| Predominant Particle Size | approx. 200 | nm | Specific method |
| Protective Colloid (Emulsifier System) | Surface active emulsifiers | — | — |
| Surface of the Dispersion Film | Tack free | — | Specific method |
| Value | Units | Test Method / Conditions | |
| Dynamic Viscosity (at 23°C) | 150 - 1850 | mPa·s | DIN EN ISO 2555 |
| pH | 3.5 - 5.5 | — | DIN/ISO 976 |
| Solids Content | 55 - 57 | % | DIN EN ISO 3251 |
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 6 Months
- Storage Information
- When the dispersion is stored in tanks, proper storage conditions must be maintained. The product has a shelf life of 6 months starting from the date of manufacture if stored in the original, unopened containers at temperatures between 5 and 30°C.
- Iron or galvanized-iron equipment and containers are not recommended because the dispersion is slightly acidic. Corrosion may result in discoloration of the dispersion or its blends when further processed. Therefore, the use of containers and equipment made of ceramics, rubberized or enameled materials, appropriately finished stainless steel, or plastic (e.g. rigid PVC, polyethylene or polyester resin) is recommended.
- As polymer dispersions may tend to superficial film formation, skins or lumps may form during storage or transportation. Filtration is therefore recommended prior to utilization of the product.
Preservation for Transport, Storage and further Processing
- The product is adequately preserved during transportation and storage if kept in the original, unopened containers. However, if it is transferred to storage tanks, the dispersion should be protected against microbial attack by adding a suitable preservative package. Measures should also be taken to ensure cleanliness of the tanks and pipes. In unstirred tanks, a layer of preservative-containing water should be sprayed onto the surface of the dispersion to prevent the formation of unwanted skin and possible attack by microorganisms.
- The thickness of this water layer should be < 5 mm for low viscosity dispersions and up to 10-20 mm for high viscosity products. Proper procedures - periodic tank cleaning and sanitization - must be set up in order to prevent microbial attack. Contact your biocide representative/supplier for further plant hygiene recommendations.
- Measures should be taken to ensure that only clean air enters the tank when the dispersion is removed. Finished products manufactured from polymer dispersions usually also require preservation.
- The type and scope of preservation will depend on the raw materials used and the anticipated sources of contamination. The compatibility with other components and the efficacy of the preservative should always be tested in the respective formulation. Preservative manufacturers will be able to advise you about the type and dosage of preservative required.