company tower banner

Products

Wacker Chemie AG

22 Products found on Wacker Chemie AG in Implants & Prosthetics

TDSWith TDS

ELASTOSIL® LR 3003/80 US A/B banner

ELASTOSIL® LR 3003/80 US A/B

Polymer Name:Liquid Silicone Rubber (LSR)
End Uses:Medical/Healthcare Applications, Buttons, Handles, Body Implants, Medical Devices, Diaphragms, Soft Touch Applications
Features:Pigmentable, Long Potlife, Excellent Transparency Properties, Good Electrical Properties, Good Mechanical Properties, Food Contact Acceptable, Good Moldability, Fast Curing, High Clarity
Tear Strength:21.0 - 21.0 kN/m

ELASTOSIL® LR 3003/80 US A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003/80 US A/B series. It is a paste-like, easily pigmentable two-component compound noted for its high transparency, excellent mechanical and electrical properties, and ability to be molded into intricately shaped, precision parts. It is used for health care applications, including short-term implants. Very brief molding cycles for intricately shaped and flash-free parts are possible.

ELASTOSIL® E47 Transparent

Product Type:1K (1 component) Sealant
Application Area:Gaskets, White Goods, Prosthetics
Cure Method:Moisture Cure, Chemical Cure, Air Dry
Chemical Family:Silicones

ELASTOSIL® E47 Transparent is a non-slump, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows particularly excellent adhesion to cured silicone elastomers. Vulcanization can be accelerated by elevated temperatures (up to 80°C).

ELASTOSIL® LR 3003/70 US A/B banner

ELASTOSIL® LR 3003/70 US A/B

Polymer Name:Liquid Silicone Rubber (LSR)
End Uses:Medical/Healthcare Applications, Buttons, Handles, Body Implants, Medical Devices, Diaphragms, Soft Touch Applications
Features:Pigmentable, Long Potlife, Excellent Transparency Properties, Good Electrical Properties, Good Mechanical Properties, Food Contact Acceptable, Good Moldability, Fast Curing, High Clarity
Tear Strength:31.0 - 31.0 kN/m

ELASTOSIL® LR 3003/70 US A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound. It is noted for its high transparency, excellent mechanical and electrical properties, and ability to be molded into intricately shaped, precision parts. This series is used for health care applications, including short-term implants. Very brief molding cycles for intricately shaped and flash-free parts are possible.

ELASTOSIL® P 7616-160 A/B

Polymer Name:Silicone Elastomer
End Uses:Orthotics, Prosthetics, Implants
Features:Low Viscosity, Pourable, Light Weight, Good Adhesion

ELASTOSIL® P 7616-160 A/B is an addition-curing RTV-2 silicone rubber that cures to form a soft gel. It exhibits good adhesion to polyurethane film and easy metering and mixing. It is commonly used in the production of external mammary prostheses, where it serves as the material for the outer skin, which is made of polyurethane film.

ELASTOSIL® P 7619 A/B

Polymer Name:Silicone Elastomer
End Uses:Orthotics, Prosthetics, Implants
Features:Low Viscosity, Pourable, Light Weight, Good Adhesion

ELASTOSIL® P 7619 A/B is an addition-curing RTV-2 silicone rubber that cures to form a soft gel. It provides good adhesion to polyurethane films and is used for the production of external mammary prostheses with an outer skin of polyurethane film.

SILPURAN® 2420 A/B

Polymer Name:Silicone Elastomer
End Uses:Orthotics, Prosthetics
Features:Translucent, High Hardness, Medium Hardness, Low Skin Sensitivity, Tear Resistance, Low Viscosity, Biocompatible, Pourable, Good Mechanical Properties, Fast Curing, Excellent Flowability, Room Temperature Vulcanizing
Tear Strength:13.0 - 13.0 kN/m

SILPURAN® 2420 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer of medium hardness. It belongs to the Room Temperature Curing Silicone Rubber (RTV-2) category. SILPURAN® 2420 A/B can be used for flexible molding applications in orthopedic technology. Components A and B of SILPURAN® 2420 A/B are mixed homogeneously in a ratio of A:B = 1:1 and vulcanize rapidly at temperatures over 100°C.

ELASTOSIL® FX Gel 30 A/B

Polymer Name:Silicone Elastomer
End Uses:Orthotics, Prosthetics
Features:Self Deaeration, Room Temperature Vulcanizing, Soft, Translucent, Bondability, Good Shrinkage Resistance, Low Skin Sensitivity, Good Flow, Low Viscosity, Good Colorability, Pourable, Flexible, Fast Curing, Excellent Flowability
Tear Strength:5.5 - 5.5 kN/m

ELASTOSIL® FX Gel 30 A/B is a room-temperature-curing silicone rubber (RTV-2) that is pourable and utilizes addition-curing. The main application of the product is in special effect applications for movies and theater productions. It is suitable for creating general prosthetic effects, life molding, body parts, wounds and scars, masks, and fat makeup.

ELASTOSIL® FX 20 A/B

Polymer Name:Silicone Elastomer
End Uses:Orthotics, Prosthetics
Features:Translucent, Bondability, Good Shrinkage Resistance, Low Skin Sensitivity, Good Flow, Low Viscosity, Good Colorability, Pourable, Flexible, Fast Curing, Excellent Flowability, Self Deaeration, Room Temperature Vulcanizing
Tear Strength:25.0 - 25.0 kN/m

ELASTOSIL® FX 20 A/B is a room-temperature-curing silicone rubber (RTV-2) that is pourable and utilizes addition-curing. It cures at room temperature, making it convenient to work with. The main application of ELASTOSIL® FX 10 A/B is in creating special effects for movies and theater productions. It is suitable for life molding, body parts, fat makeup, wounds, prosthetic effects, soft robotics, and second skin applications.

SILPURAN® 2400/25 A/B

Polymer Name:Silicone Elastomer
End Uses:Prosthetics
Features:Low Hardness, Room Temperature Vulcanizing, Low Viscosity, Biocompatible, Translucent, Pourable, Fast Curing
Tear Strength:1.7 - 1.7 kN/m

SILPURAN® 2400/25 A/B is an addition-curing RTV-2 silicone rubber that cures to a translucent silicone elastomer of low hardness. It belongs to the Room Temperature Curing Silicone Rubber (RTV-2) category. SILPURAN® 2400/25 A/B can be used for flexible molding applications in prosthetics. Components A and B of SILPURAN® 2400/25 A/B are delivered ready to use in drums.

ELASTOSIL® P 7671 A/B

Polymer Name:Silicone Elastomer
End Uses:Cushions, Orthotics, Prosthetics, Medical Devices
Features:Room Temperature Vulcanizing, Durable, Good Aesthetics, Good Damping, Low Hardness, Anti-allergenic, Microbe Resistant, Low Viscosity, Chemical Resistant, Pourable, Heat Resistance, Good Mechanical Properties, High Optical Transparency, Excellent Mechanical Strength, Good Thermal Stability, High Durability, Fast Curing, Excellent Flowability, Breathable, Heat Aging Resistant, Wide Range of Hardness, Solvent Resistant
Tear Strength:1.5 - 1.5 kN/m

ELASTOSIL® P 7671 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with very low hardness. It exhibits rapid cure at room temperature, which can be further accelerated by the application of heat. This product is specifically designed for flexible molding applications in prosthetics.

ELASTOSIL® P 7684/60 A/B

Polymer Name:Silicone Elastomer
End Uses:Cushions, Prosthetics, Medical Devices
Features:Room Temperature Vulcanizing, Durable, Translucent, Good Aesthetics, Low Hardness, Anti-allergenic, Microbe Resistant, Low Viscosity, Chemical Resistant, Pourable, Heat Resistance, Good Mechanical Properties, High Optical Transparency, Excellent Mechanical Strength, Good Thermal Stability, High Durability, Fast Curing, Excellent Flowability, Breathable, Heat Aging Resistant, Wide Range of Hardness, Solvent Resistant
Tear Strength:13.0 - 13.0 kN/m

ELASTOSIL® P 7684/60 A/B is an addition-curing RTV-2 silicone rubber curing to a silicone elastomer of low hardness. It exhibits a fast cure at room temperature, which can be considerably accelerated by the application of heat. This product can be used for molding applications in prosthetics.

SILPURAN® 2400 A/B

Polymer Name:Silicone Elastomer
End Uses:Prosthetics
Features:Good Damping, Low Skin Sensitivity, Low Hardness, Room Temperature Vulcanizing, Low Viscosity, Biocompatible, Translucent, Pourable, Fast Curing, Excellent Flowability
Tear Strength:3.0 - 3.0 kN/m

SILPURAN® 2400 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer of low hardness. It belongs to the Room Temperature Curing Silicone Rubber (RTV-2) category. SILPURAN® 2400 A/B can be used for flexible molding applications in prosthetics. The components A and B of SILPURAN® 2400 A/B are mixed homogeneously in a ratio of 1:1 and vulcanize rapidly at temperatures over 100°C.

ELASTOSIL® P 7684/40 A/B

Polymer Name:Silicone Elastomer
End Uses:Cushions, Prosthetics, Medical Devices
Features:Room Temperature Vulcanizing, Durable, Translucent, Good Aesthetics, Low Hardness, Anti-allergenic, Microbe Resistant, Low Viscosity, Chemical Resistant, Pourable, Heat Resistance, Good Mechanical Properties, High Optical Transparency, Excellent Mechanical Strength, Good Thermal Stability, High Durability, Fast Curing, Excellent Flowability, Breathable, Heat Aging Resistant, Wide Range of Hardness, Solvent Resistant
Tear Strength:6.0 - 6.0 kN/m

ELASTOSIL® P 7684/40 A/B is an addition-curing RTV-2 silicone rubber, curing to a silicone elastomer of low hardness. It exhibits a fast cure at room temperature, which can be considerably accelerated by the application of heat. This product can be used for molding applications in prosthetics.

ELASTOSIL® P 7676 A/B

Polymer Name:Silicone Elastomer
End Uses:Cushions, Orthotics, Prosthetics, Medical Devices
Features:Soft, Durable, Anti-allergenic, Microbe Resistant, Low Viscosity, Chemical Resistant, Good Mechanical Properties, High Optical Transparency, Excellent Mechanical Strength, Good Thermal Stability, Fast Curing, Breathable, Room Temperature Vulcanizing, Translucent, Good Aesthetics, Low Hardness, Pourable, Heat Resistance, High Durability, Excellent Flowability, Heat Aging Resistant, Wide Range of Hardness, Solvent Resistant
Tear Strength:1.0 - 1.0 kN/m

ELASTOSIL® P 7676 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with very low hardness. It exhibits rapid cure at room temperature, which can be further accelerated by the application of heat. This product is specifically designed for flexible molding applications in prosthetics.

ELASTOSIL® FX 28 A/B

Polymer Name:Silicone Elastomer
End Uses:Orthotics, Prosthetics
Features:Translucent, Good Shrinkage Resistance, Low Skin Sensitivity, Good Flow, Low Viscosity, Good Colorability, Pourable, Flexible, Fast Curing, Excellent Flowability, Self Deaeration, Room Temperature Vulcanizing
Tear Strength:28.0 - 28.0 kN/m

ELASTOSIL® FX 28 A/B is a room-temperature-curing silicone rubber (RTV-2) that is pourable and utilizes addition-curing. It consists of two components and vulcanizes at room temperature. The main application of ELASTOSIL® FX 28 A/B is in creating special effects for movies and theater productions. It is particularly suitable for body parts and prosthetics applications, decoration prototypes, and production molds.

ELASTOSIL® P 7915 A/B

Polymer Name:Silicone Elastomer
End Uses:Orthotics, Prosthetics
Features:Fast Curing, Medium Hardness, Room Temperature Vulcanizing, Kneadable, Soft
Tear Strength:5.0 - 5.0 kN/m

ELASTOSIL® P 7915 A/B is a kneadable, addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with medium hardness. This two-component compound demonstrates rapid cure at room temperature, making it convenient for use. It is particularly suitable for flexible molding applications in prosthetics.

ELASTOSIL® P 7683/25 A/B

Polymer Name:Silicone Elastomer
End Uses:Medical Devices, Cushions, Orthotics, Prosthetics
Features:Heat Aging Resistant, Wide Range of Hardness, Solvent Resistant, Room Temperature Vulcanizing, Durable, Translucent, Good Aesthetics, Low Hardness, Anti-allergenic, Microbe Resistant, Low Viscosity, Chemical Resistant, Pourable, Heat Resistance, Good Mechanical Properties, High Optical Transparency, Excellent Mechanical Strength, Good Thermal Stability, High Durability, Fast Curing, Excellent Flowability, Breathable
Tear Strength:2.0 - 2.0 kN/m

ELASTOSIL® P 7683/25 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with very low hardness. It exhibits a fast cure at room temperature, which can be further accelerated by the application of heat. This product is specifically designed for flexible molding applications in prosthetics.

SILPURAN® 4200

Product Type:1K (1 component) Adhesive
Application Area:Medical Devices, Prosthetics
Compatible Substrates & Surfaces:Ceramic, Metal, Glass, Plastics
Cure Method:Air Dry, Moisture Cure
Application Method:Roller, Air Knife Coating
Chemical Family:Silicones

SILPURAN® 4200 is a non-slump, self-leveling silicone rubber formulation that cures at room temperature under the influence of atmospheric moisture to a silicone elastomer exhibiting good mechanical properties. SILPURAN® 4200 is designed for medical applications in compliance with Wacker Silicones' health care policy.

ELASTOSIL® P 7600 A/B

Polymer Name:Silicone Elastomer
End Uses:Cushions, Orthotics, Prosthetics, Medical Devices
Features:Room Temperature Vulcanizing, Durable, Good Aesthetics, Good Damping, Low Hardness, Anti-allergenic, Microbe Resistant, Low Viscosity, Chemical Resistant, Pourable, Heat Resistance, Good Mechanical Properties, High Optical Transparency, Excellent Mechanical Strength, Good Thermal Stability, High Durability, Fast Curing, Excellent Flowability, Breathable, Heat Aging Resistant, Wide Range of Hardness, Solvent Resistant
Tear Strength:1.5 - 1.5 kN/m

ELASTOSIL® P 7600 A/B is an addition-curing RTV-2 silicone rubber that cures to a silicone elastomer with very low hardness. It exhibits rapid cure at room temperature, which can be further accelerated by the application of heat. This product is specifically designed for flexible molding applications in prosthetics.

ELASTOSIL® P 7630 A/B

Polymer Name:Silicone Elastomer
End Uses:Orthotics, Prosthetics, Implants
Features:Low Viscosity, Fast Curing, Light Weight, Low Density, Good Adhesion

ELASTOSIL® P 7630 A/B is an addition-curing RTV-2 silicone rubber that cures to form a soft gel. It provides good adhesion to polyurethane films and is used for the production of external mammary prostheses with an outer skin of polyurethane film.

ELASTOSIL® P 7670 A/B

Polymer Name:Silicone Elastomer
End Uses:Medical Devices, Cushions, Orthotics, Prosthetics
Features:Heat Aging Resistant, Wide Range of Hardness, Solvent Resistant, Room Temperature Vulcanizing, Durable, Good Aesthetics, Good Damping, Low Hardness, Anti-allergenic, Microbe Resistant, Low Viscosity, Chemical Resistant, Pourable, Heat Resistance, Good Mechanical Properties, High Optical Transparency, Excellent Mechanical Strength, Good Thermal Stability, High Durability, Fast Curing, Excellent Flowability, Breathable
Tear Strength:2.1 - 2.1 kN/m

ELASTOSIL® P 7670 A/B is an addition-curing RTV-2 silicone rubber curing to a silicone elastomer of low hardness. This product exhibits rapid cure at room temperature, which can be considerably accelerated by the application of heat. It can specifically be used for flexible molding applications in prosthetics.

ELASTOSIL® FX 10 A/B

Polymer Name:Silicone Elastomer
End Uses:Soft Robotics, Orthotics, Prosthetics, FX Makeup, Mold Making
Features:Self Deaeration, Room Temperature Vulcanizing, Translucent, Bondability, Good Shrinkage Resistance, Low Skin Sensitivity, Good Flow, Low Viscosity, Good Colorability, Pourable, Flexible, Fast Curing, Excellent Flowability
Tear Strength:20.0 - 20.0 kN/m

ELASTOSIL® FX 10 A/B is a room-temperature-curing silicone rubber (RTV-2) that is pourable and utilizes addition-curing. It cures at room temperature, making it convenient to work with. The main application of ELASTOSIL® FX 10 A/B is in creating special effects for movies and theater productions. It is suitable for life molding, body parts, fat makeup, wounds, prosthetic effects, soft robotics, and second skin applications.