Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Special Features
- Addition Curing
- Fast curing at room temperature
- Flowable
- Low viscosity
- No chemical shrinkage
- Suitable for skin contact
- Two-component
Applications & Uses
- Applications
- Cure Method
- Plastics & Elastomers End Uses
- Applications
- Insoles, Orthoses & Pelottes
- Orthotics & Prosthetics
- Special FX Molding
- Application Details
- Special effect applications for movies and theater productions
- For example life molding, body parts, fat make up and wounds
- Prosthetic effects
- Soft robotics, second skin applications
Processing
Important Note
- The platinum catalyst is contained in component A
- A and *B components may only be used together if they have the same batch number.
Properties
- Color
- Catalyst Properties
- Cured Properties
- Uncured Properties
- Properties
- Very good flow ability and self-deaeration
- Easy to meter and mix due to 1:1 ratio
- Short curing time at room temperature
- Translucent
- Easy to color with common colors for special effect applications
- Good bonding to top coats like Glatzan, Super Baldiez or similar products
- Adjustable in thixotropy with ELASTOSIL® FX Thixo
- Adjustable in hardness and tackiness with ELASTOSIL® FX Softener
- Note
Cured properties are cured after 24 hours at 23 °C.
| Value | Units | Test Method / Conditions | |
| Demoldable (at 23°C) | 45 | minutes | — |
| Mix Ratio | 1:1 | parts by weight | — |
| Pot Life (up to 100000 mPa.s) | 8 - 12 | minutes | DIN EN ISO 2555 |
| Value | Units | Test Method / Conditions | |
| Elongation (at break) | 950 | % | ISO 37 Type 1 |
| Shore Hardness A | 10 | — | DIN ISO 48-4 |
| Tear Strength | min. 20 | N/mm | ASTM D 624, Die B |
| Tensile Strength | 4.5 | N/mm² | ISO 37 Type 1 |
| Value | Units | Test Method / Conditions | |
| Density (at 23°C, Componenet A) | 1.06 | g/cm³ | DIN EN ISO 2811-1 |
| Density (at 23°C, Componenet B) | 1.06 | g/cm³ | DIN EN ISO 2811-1 |
| Dynamic Viscosity (Component A, at 23°C) | 6000 | mPa·s | ISO 3219 |
| Dynamic Viscosity (Component B, at 23°C) | 4500 | mPa·s | ISO 3219 |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety Note
Components A and B of the addition-curing grade ELASTOSIL® FX 10 A/B contain only constituents that over many years have proved to be neither toxic nor aggressive. Special handling precautions are therefore not required, i.e. only the general industrial hygiene regulations apply.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage Information
ELASTOSIL® FX 10 A/B is best stored between 5 °C and 30 °C in the tightly closed original container.