Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Cure Method
- Plastics & Elastomers End Uses
- Applications
- Insoles, Orthoses & Pelottes
- Orthotics & Prosthetics
- Application Details
ELASTOSIL® P 7600 A/B can be used for flexible molding applications in prosthetics.
Processing
The components A and B of ELASTOSIL® P 7600 A/B are mixed homogeneously in a ratio of 1 : 1 and vulcanize rapidly at temperatures over 100°C. In a given application the required curing conditions (temperature and time) will also depend on the size and thickness of the part.
- Important note: The platinum catalyst is in component A.
- Caution: Only A and B components with the same batch number may be processed together!
Properties
- Color
- Physical Form
- Catalyst Properties
- Cured Properties
- Uncured Properties
- Properties
- Low viscosity, easily pourable
- Short pot-life
- Rapid cure at room temperature which can be accelerated considerably by the application of heat
| Value | Units | Test Method / Conditions | |
| Mix Ratio (A:B) | 1:1 | parts by weight | — |
| Pot Life (A+B, at 23°C) | 27 | minutes | DIN EN ISO 2555 |
| Value | Units | Test Method / Conditions | |
| Elongation (at break) | 600 | % | ISO 37 Type 1 |
| Shore Hardness 00 | 26 | — | ASTM D 2240 |
| Tear Strength | 1.5 | N/mm | ASTM D 624 B |
| Tensile Strength | 1 | N/mm² | ISO 37 Type 1 |
| Value | Units | Test Method / Conditions | |
| Density (at 23°C, Componenet A) | 0.99 | g/cm³ | DIN EN ISO 2811-1 |
| Density (at 23°C, Componenet B) | 1.05 | g/cm³ | DIN EN ISO 2811-1 |
| Dynamic Viscosity (Component A) | 4000 | mPa·s | ISO 3219 |
| Dynamic Viscosity (Component B) | 2000 | mPa·s | ISO 3219 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability