Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Special Features
- Addition Curing
- Fast curing at room temperature
- Flowable
- Low viscosity
- No chemical shrinkage
- Suitable for skin contact
- Two-component
Applications & Uses
- Applications
- Cure Method
- Plastics & Elastomers End Uses
- Applications
- Insoles, Orthoses & Pelottes
- Orthotics & Prosthetics
- Special FX Molding
- Application Details
- Special effect applications for movies and theater productions
- General prostethic effects
- Life Molding
- Body parts
- Wounds / Scars
- Masks and fat make-up
Processing
- The platinum catalyst is contained in component A.
- A and B components may only be used together if they have the same batch number.
- To ensure optimum flow of the material, the components must be stirred thoroughly before they are removed or processed in their containers.
Properties
- Color
- Physical Form
- Catalyst Properties
- Cured Properties
- Uncured Properties
- Properties
- Very good flow ability and self-deaeration.
- Very soft
- Easy to meter and mix due to 1:1 ratio
- Short curing time at room temperature
- Translucent
- Easy to color with common colors for special effect applications
- Good bonding to top coats like Glatzan, Super Baldiez or similar products
- Adjustable in thixotropic with ELASTOSIL® FX Thixo
- Adjustable in hardness and tackiness with ELASTOSIL® FX Softener
| Value | Units | Test Method / Conditions | |
| Demoldable (at 23°C) | 45 | minutes | — |
| Mix Ratio | 1:1 | parts by weight | — |
| Pot Life (at 23°C, up to 100000 mPa.s) | 8 - 12 | minutes | DIN EN ISO 2555 |
| Value | Units | Test Method / Conditions | |
| Elongation (at break) | min. 900 | % | ISO 37 Type 1 |
| Shore Hardness 00 | 30 | — | ASTM D 2240 |
| Tear Strength | 5.5 | N/mm | ASTM D 624, Die B |
| Tensile Strength | min. 1.5 | N/mm² | ISO 37 Type 1 |
| Value | Units | Test Method / Conditions | |
| Density (at 23°C, Componenet A) | 1.06 | g/cm³ | DIN EN ISO 2811-1 |
| Density (at 23°C, Componenet B) | 1.06 | g/cm³ | DIN EN ISO 2811-1 |
| Dynamic Viscosity (Component A, at 23°C, after stirring) | 4000 | mPa·s | ISO 3219 |
| Dynamic Viscosity (Component B, at 23°C, after stirring) | 4000 | mPa·s | ISO 3219 |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety Note
Components A and B of the addition-curing grade ELASTOSIL® FX30 Gel A/B contain only constituents that over many years have proved to be neither toxic nor aggressive. Special handling precautions are therefore not required, i.e. only the general industrial hygiene regulations apply.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage Information
Storage ELASTOSIL FX30 Gel A/B is best stored between 5 °C and 30 °C in the tightly closed original container.