Products

WACKER® AK 10 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 10 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits good solubility in a wide range of solvents and minimal changes in physical properties over a broad temperature range.

WACKER® AK 200 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 200 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits low surface tension, resulting in high surface activity. Additionally, it is chemically highly unreactive and has a low solidifying point.

WACKER® AK 5 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 5 mm²/s. Its chemical structure gives WACKER® AK 5 exceptional properties that distinguish it from organic materials like mineral oils. It is chemically highly unreactive, has a low solidifying point, and exhibits high heat resistance.

WACKER® AK 500 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 500 mm²/s. Its chemical structure imparts exceptional properties that distinguish it from organic materials like mineral oils. WACKER® AK 500 exhibits excellent dielectric properties, low surface tension resulting in high surface activity, and a high degree of chemical inertness. These characteristics make it well-suited for various applications where these specific properties are required.

WACKER® AK 100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 100 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It has a high flash point, demonstrating its resistance to ignition. It also exhibits high heat resistance and good solubility in a wide range of solvents.

VINNAPAS® EZ 123 is an aqueous polymer dispersion of vinyl acetate and ethylene specifically designed for applications in the nonwovens market. It is produced without the use of plasticizers or APEO surfactants. This dispersion possesses a nonionic character and provides high dry tensile strength, resulting in a fuller and stiffer hand feel to nonwoven webs. It can be formulated with various chemistries, including cationic, anionic, or nonionic, to create specialized nonwovens. Additionally, VINNAPAS® EZ 123 is a low-odor dispersion with formaldehyde levels of less than 50 ppm.

GENIOSIL® GF 80 is an epoxy functional alkoxysilane. When used as a coupling agent in mineral-filled plastics, it enhances filler dispersibility, reduces sedimentation tendency, and significantly lowers the resin's viscosity. Moreover, it allows for higher filler loading and provides notable improvements in water (vapor) resistance, as well as resistance to acids and bases. In the realm of adhesives and sealants, incorporating GENIOSIL® GF 80 enhances adhesion to the substrate and improves mechanical properties like flexural strength, tensile strength, and modulus of elasticity.

VINNAPAS® EN 1165 is an aqueous, self-crosslinking copolymer dispersion based on vinyl acetate and ethylene. It is produced without the use of alkyl phenol ethoxylate (APEO)-based materials. This dispersion is specifically designed to serve as a moderately soft binder for nonwoven applications that demand exceptional wet tensile strength performance.

WACKER® AK 20000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 20000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits excellent water-repellent properties, good dielectric properties, and low surface tension, resulting in high surface activity.

SILRES® BS SMK 2101 is a solventless silicone microemulsion concentrate based on silanes and siloxanes that is diluted with water to yield a microemulsion. Dilute aqueous solutions of SILRES® BS SMK 2101 are high-quality specialty water repellents for hydrophobic impregnation and priming normal and reinforced concrete, as well as water resisting admixtures for non-load-bearing manufactured concrete products.

GENIOSIL® GF 82 is an epoxy-functional alkoxysilane. It is a clear, colorless liquid with a characteristic odor similar to gasoline. It hydrolyzes slowly in the presence of water, releasing ethanol, and forms silanols that can react with themselves to produce siloxanes or bind to inorganic substrates. The epoxy group on GENIOSIL® GF 82 can undergo a ring-opening reaction with nucleophiles such as alcohols and amines.

WACKER® AK 50 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 50 mm²/s. Its unique chemical structure gives WACKER® AK 50 a remarkable set of properties that distinguish it from organic materials like mineral oils. These include low surface tension, resulting in high surface activity, exceptional chemical inertness, and a low solidifying point.

WACKER® AK 12500 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 12500 mm²/s. Its chemical structure gives it exceptional properties that distinguish it from organic materials like mineral oils. It exhibits minimal changes in physical properties over a broad temperature range, excellent water-repellent properties, and good dielectric properties.

SEMICOSIL® TEOS 999-LB is an ultra-high-purity tetraethoxysilane (TEOS) known for its exceptional chemical purity, very good trace metal purity, and very good purity in terms of boron and chloride. This product has been specifically developed for the semiconductor industry and finds typical applications as a precursor for low-dielectric constant interlayer dielectrics and other related uses.

WACKER® AK 0,65 is a hexamethyldisiloxane. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits good dielectric properties, low surface tension, high surface activity, and is chemically highly unreactive. Additionally, it has a low solidifying point.

PULPSIL® 955 S is a hydrolytically stable silicone surfactant that is water-dispersible and consists of a polyethermodified silicone fluid. It has been specifically designed for use in the pulp and paper industry. This product significantly improves the efficiency of paper deaerators, enhances the drainage and deaeration processes in pulp production, and acts as a booster for pulp defoamers beyond their cloud point.

PULPSIL® 160 C is a highly viscous silicone antifoam compound, specifically designed for use in pulp mills. It is resistant to alkaline conditions and does not contain solvents or water. PULPSIL® 160 C offers excellent handling, long-term efficiency, and knock-down efficiency.

LIOSIL® FC 203 is a self-dispersible aminofunctional silicone fluid with polyether groups. It is used in combination with conventional fabric softeners. Due to its special composition, LIOSIL® FC 203 enhances the hydrophilicity of fabrics, leading to a significant increase in absorbency. In addition, LIOSIL® FC 203 reduces the friction force during ironing, resulting in improved ironing properties.

WACKER® EAF 300 is a general-purpose, low-cost, low-molecular-weight reactive aminoethylaminopropyl fluid. It provides a very soft hand and exhibits the normal yellowing characteristics typically associated with amino silicones. WACKER® EAF 300 is specifically well-suited as an active ingredient in softener formulations for the impregnation of fibers and textiles.

WACKER® E 1656 is an oil-in-water emulsion of aminofunctional polydimethylsiloxane stabilized by nonionic emulsifiers. This formulation allows for easy combination with other emulsions in various applications. WACKER® E 1656 is particularly well-suited for use in car polishes, such as paint conditioners, paint polishes, and vinyl conditioners.

VINNAPAS® eco 5044 N is a dispersible polymer powder designed for dry mix mortars, with specific suitability for applications such as ETICS (External Thermal Insulation Composite Systems), waterproofing membranes, and concrete repair. This product is based on a highly flexible copolymer of vinyl acetate and ethylene, and it falls under the VINNAPAS® N product class. Being part of this class means that it has a neutral impact on rheology while offering essential properties like adhesion and flexibility, allowing for a wide range of formulation options.

GENIOSIL® GF 91 is an alkoxysilane that contains an amino-functional group. It is a clear, colorless to light yellow liquid with a characteristic amine odor. This product finds application in various areas, including building and construction adhesives, do-it-yourself projects, flooring installation, interior paints and coatings, and waterproofing membranes.

WACKER® 1038 is a specialized product formed by the reaction of silicone resin with silicone fluids, resulting in the creation of water-repellent release films. These films demonstrate superior affinity compared to polydimethylsiloxanes and other organomodified silicone fluids of similar viscosity.

SILRES® BS 2001 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. It is a ready-to-use solution that serves as a high-quality water repellent for impregnating and priming mineral surfaces. After application, the emulsion undergoes hydrolysis, releasing alcohol and converting into a silicone resin.

WACKER® IM 11 is a polydimethylsiloxane having carbinol functional groups in α,ω-position. WACKER® IM 11 can be used neat, in a solution, or as an emulsion. Suitable solvents for WACKER® IM 11 are aliphatic and aromatic hydrocarbons, chlorinated hydrocarbons, esters, higher alcohols, and ketones.

WACKER® E 37 is a nonionic or anionic oil-in-water emulsion that contains a combination of polydimethylsiloxanes and silicone resins as its active ingredient. It can be easily incorporated into cold-stirred formulations. The primary applications of WACKER® E 37 are in the polish and release agent sectors.

WACKER® JSD 50E is a premier silicone defoamer emulsion concentrate with a solids content of 50%. It is specifically designed to provide excellent foam control in a wide range of industrial applications. The product, known for its "Free Rinsing" property, allows for flexibility and cost-effectiveness in use. WACKER® JSD 50E is formulated using high molecular weight polysiloxane and silica technology. It is safe to use in textile applications that involve high alkaline and high temperature conditions. The product demonstrates superior foam knockdown capabilities.

VINNEVA® LC 0300 is an aqueous polymer dispersion with a low glass transition temperature (Tg). It is produced from the monomers vinyl acetate, ethylene, and acrylate. This dispersion offers excellent elongation, adhesion, and flexibility, making it suitable for various bitumen emulsions. VINNEVA® LC 0300 is compatible with most anionic bitumen emulsions and can also be used with other latexes, modifiers, and VINNEVA® dispersions.

WACKER® 1035 is a silicone resin compound available as a low-viscosity 50% solution. This product is specifically designed for formulating straightforward release agent systems, particularly for use in polyurethane (PUR) processing. WACKER® 1035 can be easily blended with polydimethylsiloxanes from the WACKER® AK series. In addition to WACKER® 1035, Wacker-Chemie offers a range of 100% products, such as WACKER® TPR and WACKER® 1038, which provide varying release properties and paintability options.

WACKER® E 22 is a high-viscosity polydimethylsiloxane formulated as an oil-in-water emulsion. This finely dispersed emulsion provides excellent stability, allowing for the preparation of highly diluted, ready-to-use formulations that are unaffected by shear forces. WACKER® E 22 is a special, finely dispersed formulation of a highly viscous polydimethylsiloxane in water. The emulsion is extremely stable, so even highly diluted, ready-to-use formulations are indifferent to shear forces.

GENIOSIL® GF 9 is an organofunctional silane with various applications. It is commonly used in building & construction adhesives, Flooring installation, Industrial adhesives, Interior paints & coatings, and waterproofing membranes. GENIOSIL® GF 9 is particularly effective in glass-fiber reinforced or mineral-filled polymers as well as a surface modifier.