Products

VINNAPAS® EP 3455 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of alkyl phenol ethoxylate (APEO)-containing compounds. The dispersion offers very high scrub resistance, excellent hiding power, and exceptional pigment binding ability.

ELASTOSIL® N9111 White is a non-slump, non-corossive, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. It is a multipurpose sealant and adhesive for the appliance, automotive, and electronics industries. Due to its shear-thinning nature, ELASTOSIL® N9111 White is easy to apply. The material starts curing upon contact with air humidity.

SILPURAN® AUX 8250 RO is a white, barium sulfate-containing batch that is used as a radio-opaque additive for peroxide-cured high-contrast silicone rubber. SILPURAN® AUX 8250 RO is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

VINNAPAS® 5046 T is a dispersible polymer powder for dry mix mortars, specifically suited for thixotropic tile adhesives, repair mortars, troweling compounds, and ETICS. It is based on a flexible copolymer of vinyl acetate and ethylene. VINNAPAS® 5046 T belongs to the product class VINNAPAS® T, which means that it provides thixotropic properties. In addition to strong non-slump properties, it offers excellent workability.

VINNAPAS® 5537 T is a dispersible polymer powder for dry mix mortars, specifically suited for thixotropic tile adhesives and ETICS. It is based on a flexible copolymer of vinyl acetate and ethylene. VINNAPAS® 5537 T belongs to the product class VINNAPAS® T, which means that it provides thixotropic characteristics. Besides good non-slump properties and workability, it offers good tensile adhesion strength after water immersion. The product is currently in the process of being introduced into industrial use (scale-up product). The quoted product data is, therefore, subject to change. Before industrial use, availability should be clarified with WACKER POLYMERS.

VINNAPAS® EAF 7868 is a low glass transition temperature (Tg) aqueous polymer dispersion formulated with vinyl acetate, ethylene, and acrylic esters. It is manufactured without the use of plasticizers and demonstrates excellent compatibility with fillers. Moreover, it provides good adhesion to diverse substrates, including concrete, metal, wood, and plastics. Derived from low-volatile C1/C2 value streams, it can be formulated without the need for plasticizers.

VINNAPAS® EF 7865 is a low Tg aqueous polymer dispersion formulated with vinyl acetate and ethylene monomers. It is manufactured without the use of plasticizers and demonstrates excellent filler compatibility. This product exhibits high filler acceptance and provides good adhesion to various substrates such as concrete, metal, wood, and plastics.

VINNAPAS® EP 7860 is an aqueous polymer dispersion based on vinyl acetate and ethylene monomers. It is manufactured without the use of plasticizers. This dispersion exhibits excellent compatibility with fillers, allowing for high filler acceptance. Moreover, VINNAPAS® EP 7860 demonstrates special extension recovery properties, particularly at high filler levels. It also offers good adhesion to a variety of substrates, including concrete, metal, wood, and plastics.

PULPSIL® 733 E is a low-viscosity, highly effective silicone antifoam emulsion specifically designed for use in pulp mills. It serves as both an antifoam agent and a drainage aid, and can be added at different stages of the manufacturing process. PULPSIL® 733 E is primarily used in pulp washing and screening processes, but it is also effective in bleaching and wastewater treatment.

GENIOPERL® P52 is a particulate polymer modifier available in powder form. The primary particles, which are spherical and reversibly agglomerated, consist of a low-modulus, crosslinked silicone core and an organic polymer shell. This unique composition enables GENIOPERL® P52 to enhance the impact strength of thermoplastic and thermoset polymer systems, particularly in low-temperature conditions.

VINNAPAS® 4240 N is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS, wall applications, and tile adhesives. It is based on a very flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility. VINNAPAS® 4240 N is part of our standard range, offering best-in-class solutions.

VINNAPAS® 4121 N is a dispersible polymer powder for dry mix mortars, specifically suited for price-optimized ETICS. It is based on a semi-flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology and provides very good adhesion on organic (polystyrene) and inorganic (concrete) substrates. Additionally, VINNAPAS® 4121 N can be used for C1- and simple C2-tile adhesives.

VINNAPAS® DP 600 is an aqueous, plasticizer-free polymer dispersion with a low sedimentation tendency, produced from vinyl acetate monomer. VINNAPAS® DP 600 can be used as a raw material for D1 and D2 wood glues, as well as paper and packaging adhesives.

VINNAPAS® DPN 16 is an aqueous polymer dispersion produced from vinyl acetate monomer. VINNAPAS® DPN 16 can be used as a raw material for water-resistant wood glues. It causes low discoloration of the glue line when hot pressing. VINNAPAS® DPN 16 meets the requirements of strain group D3 of EN 204 without the addition of a catalyst.

VINNACEL® 101 is a polymeric modifier that can be used solely with mineral fillers and cement to achieve mortars with high strength and good workability, such as tile adhesives and skim coats. The product is in the process of being introduced into industrial use (a scale-up product).

VINNAPAS® EP 24 is an aqueous polymer dispersion, free from plasticizers, that is produced from vinyl acetate and ethylene monomers. It offers good adhesion to various plastic surfaces, resulting in a permanently flexible glue line. This product is particularly suitable for applications such as adhesives for paper packaging and PVC furniture foil adhesives.

SILFOAM® SE 2263 is a water-dispersible antifoam emulsion with a low to medium viscosity. It is formulated based on an organomodified polysiloxane. This product effectively prevents foam formation (as an antifoam) and eliminates existing foam (as a defoamer) in various aqueous systems. SILFOAM® SE 2263 is particularly well-suited for applications where the use of silicones could typically present challenges, such as PVC degassing, the manufacturing and processing of polymer dispersions for textiles, paper, paints, surface coatings, and adhesives, as well as cooling lubricants and textile formulations.

WACKER® E35 100 is a 35% emulsion of medium-viscosity polydimethylsiloxane. It is primarily designed for use in applications for mold release, furniture polish, textile finishing, and other specialty formulations. WACKER® E35 100 contains sodium nitrite as a corrosion inhibitor. It should not be used in contact with amines.

VINNAPAS® 4220 L is a dispersible polymer powder for dry mix mortars, specifically suited for self-leveling flooring compounds and screeds. It is based on a copolymer of vinylacetate and ethylene in the medium Tg range and belongs to the product class VINNAPAS® L, which means that it improves the leveling and surface properties as well as the stabilization of the fresh mortar. Cured mortars with VINNAPAS® 4220 L have improved adhesion, flexural strength, deformability, and abrasion resistance.

WACKER® E35 10000 is a 35% emulsion of a high-viscosity polydimethylsiloxane. It is designed to be used in many applications, such as mold release, car and furniture polish, textile lubricants and softeners, automotive care,and other specialty product applications. The E35 Series emulsions contain sodium nitrite as a corrosion inhibitor. These emulsions should not be used in contact with amines.

VINNAPAS® H 65 is an aqueous polymer dispersion produced from vinyl acetate monomer. It is plasticizer-free and has a high solid content. VINNAPAS® H 65 offers a high setting speed. It can be used as a raw material for various applications, including base dispersion for D1 and D2 wood adhesives, as well as paper and packaging adhesives.

WACKER® MQ 803 TF is a co-hydrolysis product of tetraalkoxy silane (Q unit) and trimethylalkoxy silane (M unit). Its chemical structure forms a three-dimensional network of polysilicic acid units, which are endblocked with trimethylsilyl groups. The product contains residual ethoxy and hydroxy functions. The average molecular weight can be precisely controlled by adjusting the ratio of M and Q units, with WACKER® MQ 803 TF having a ratio of approximately 0.67. WACKER® MQ 803 TF is a pure white powder that is manufactured to be largely free of volatile impurities, containing only trace amounts of aliphatic hydrocarbons. The product's low presence of fine dust particles and its uniform spherical particle shape contribute to its excellent rheological properties, particularly its flowability. As a result, common powder processing techniques such as bottling, conveying, and metering are simplified.

WACKER® NE 4720 is an anionic oil-in-water emulsion of medium-viscosity polydimethylsiloxane. It has a low viscosity and can be easily diluted with water. WACKER® NE 4720 exhibits excellent wetting properties on various substrates. Importantly, it does not cause stress crack corrosion when in contact with acrylic glass or polycarbonates.

VINNAPAS® 5021 T is a dispersible polymer powder for dry mix mortars, specifically suited for tile adhesive and wall and joint fillers. It is based on a semi-flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS T, which means it has a thixotropic effect on the rheology.

GENIOPLAST® PP50S12 MG is a pelletized masterbatch formulation. It contains 50% of a non-reactive, ultra-high molecular weight silicone gum dispersed in polypropylene homopolymer. This formulation is specifically developed as an additive to enhance scratch resistance in polypropylene-based compounds for automotive interior applications.

WACKER® E 3157 is a nonionic oil-in-water emulsion of a medium-viscosity polydimethylsiloxane dispersed in water. The emulsion remains stable even in diluted form under shear stress and offers excellent wetting and spreading properties. It can be easily incorporated into cold-stirred formulations. WACKER® E 3157 is particularly suitable for formulating paint and vinyl conditioners.

GENIOPLAST® PP50S12 is a pelletized masterbatch formulation comprising 50% of a non-reactive, ultra-high molecular weight silicone gum dispersed in polypropylene homopolymer. It is specially designed as an additive to enhance scratch resistance in polypropylene-based compounds used in automotive interior applications.

LIOSIL® FC 130 E is a nonionic macro emulsion of a self-dispersing polyether-amino-functional silicone fluid, specifically designed for fabric softeners. It is used in combination with conventional fabric softeners to enhance their properties. LIOSIL® FC 130 E can be easily mixed with fabric softeners. Its selected functionality significantly improves the hydrophilicity of fabrics, leading to a substantial increase in water absorbency.

WACKER® W 27 is a white to cream-colored, high-melting waxy alkyl modified polysiloxane. It is highly resistant to hydrolysis and demonstrates a remarkable affinity for a wide range of substrates. This product finds applications in car care, car polishes, paint preservatives, plastic-care products, and surface care.

WACKER® E35 350 is a 35% emulsion of medium-viscosity polydimethylsiloxane. It is primarily designed for use in applications for furniture polish, textile finishing, and other specialty formulations. WACKER® E35 350 contains sodium nitrite as a corrosion inhibitor. It should not be used in contact with amines.

HDK® H15 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H15 is commonly utilized as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics, and other applications. Additionally, it serves as a reinforcing filler in elastomers, particularly silicone elastomers. Moreover, HDK® H15 functions as a free flow additive in the production of technical powders.

VINNAPAS® CA 5317 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for backcoatings of woven materials, needle felt floor coverings, and tufted carpets. The dispersion combines a high solid content with a moderate viscosity. VINNAPAS® CA 5317 is not produced with any added organic solvents or plasticizers.

WACKER® E60 1000 is a 60% emulsion of a medium-viscosity polydimethylsiloxane fluid using a nonionic surfactant system. This product has been designed to be used in many applications, such as mold release, furniture polish, automotive care, and other specialty product applications.

POWERSIL® GEL C 670 A/B is a two-component, addition-curing silicone mixture that cures at room temperature to a soft silicone gel. The gel is filled with a special lightweight filler, resulting in low density and compressibility. This unique compressibility makes the material suitable for applications in closed instruments without pressure compensation containers.

SILMIX® M70 White is a compound used for fabricating vulcanizates that display a unique combination of characteristics. They are recognized for their good flexibility and mechanical properties. SILMIX® M70 White is designed for fabricating molded articles. Moreover, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."